超声波辅助化学萃取对某工业场地铅污染土壤修复效果研究

以某铅蓄电池厂污染场地5个铅污染区域(WS、A、B、C及BZ)的土壤为研究对象,对土壤中铅全量及各形态含量进行分析.在0.1 mol.L-1EDTA,30 min,25℃相同条件下,使用超声波辅助化学洗脱(ultrasonic-assisted chemical extraction,UCE)与传统化学洗脱(conventional chemical extraction,CCE)两种不同的作用方式,对铅的去除效率进行比较,并对两种不同清洗方式后铅的形态变化进行了探讨.结果表明,UCE对铅的去除效率显著优于CCE.在CCE作用下,5份污染土壤WS、A、B、C、BZ铅的去除效率依次为10.06%、48.29%、48.69%、53.28%及36.26%,而UCE作用下铅的去除效率依次为22.42%、69.31%、71.00%、74.49%及71.58%,平均效率高出22%.通过对比两种清洗方式后土壤中的铅形态发现,酸可提取态在UCE作用后持平或有所降低,但CCE后使酸溶态有增高的趋势;对于铁锰氧化态,UCE对其有着极好的去除能力,可达98%左右,同时对有机物及硫化物结合态、残渣态也具有较好的去除能力.因此,UCE在化学萃取中的应用具有一定的可行性,是一种简单、极快速去除污染场地中重金属铅的增效手段.     

基于模糊层次分析法的某超高层建筑疏散效率分析

超高层建筑人员疏散效率直接影响建筑安全水平。基于模糊层次分析法(FAHP),构建了评价超高层建筑疏散效率的指标体系,分析了各因素对疏散效率的影响。结果表明疏散宽度和人员数量对疏散效率影响较大。通过人员疏散软件对评估结果进行了验证。疏散效率结果与人员疏散模拟软件的计算结果基本吻合,能较准确地预测各因素变化所带来的影响,但对于人员数量较少时疏散宽度发生变化的情况尚不能完全适用。     

注汽锅炉烟气余热利用技术应用

通过对注汽锅炉烟气余热利用潜力分析和开展余热利用方式对比分析,采用了在对流段安装热管换热器,通过换热器将烟气余热与助燃空气换热,余热利用技术的现场应用,实现了注汽锅炉燃料单耗降低的目的,取得良好的节能效果。     

辽宁沿海经济带港口竞争力和效率评价——基于主成分分析和数据包络分析

通过建立合理的指标体系,使用主成分分析法评价辽宁沿海经济带港口整体竞争力,发现统计期间内其竞争力不断增强,交通配套设施在此期间始终停滞不前甚至下降,是整体竞争力提升的一个消极因素.将计算结果代入DEA方法评价其效率,发现辽宁沿海经济带港口管理较好,在2004年之后效率始终保持较高水平,仍然有继续提升的空间.     

Would hotelling kill the electric car?

In this paper, we show that the potential for endogenous technological change in alternative energy sources may alter the behaviour of resource-owning firms. When technological progress in an alternative energy source can occur through learning-by-doing, resource owners face competing incentives to extract rents from the resource and to prevent expansion of the new technology. We show that in such a context, it is not necessarily the case that scarcity-driven higher traditional energy prices over time will induce alternative energy supply as resources are exhausted. Rather, we show that as we increase the learning potential in the substitute technology, lower equilibrium energy prices prevail and there may be increased resource extraction and greenhouse gas emissions. We show that the effectiveness and the incidence of emissions reduction policies may be altered by increased potential for technological change. Our results suggest that treating finite resource rents as endogenous consequences of both technological progress and policy changes will be important for the accurate assessment of climate change policy.     

Measurement of agricultural total factor productivity growth incorporating environmental factors: A nutrients balance approach

This article proposes to use nutrient-orientated environmental efficiency (EE) measures to construct a nutrient total factor productivity index (NTFP). Since nutrient-orientated EE measures are consistent with the materials balance principle, NTFP index is superior to other existing TFP indexes. An empirical study on the environmental performance of an agricultural sector in 30 OECD countries from 1990 to 2003 yielded several important findings. First, these countries should be able to produce current outputs with at least 50% less aggregate eutrophying power, implying that they should have been able to substantially reduce the potential for eutrophication. Second, traditional TFP has grown by 1.6% per annum due to technical progress; however, there are lags in the responses of several countries to this technical progress. Third, environmental TFP has grown at a slower rate than traditional TFP growth due to reductions in nutrient-orientated allocative efficiency. Finally, changes in input combinations could have significantly improved environmental efficiency and productivity. These findings favor policy interventions and faster technological transfer to improve environmental performance.     

Evaluating weather effects on interannual variation in net ecosystem productivity of a coastal temperate forest landscape: A model intercomparison

Forest productivity is strongly affected by seasonal weather patterns and by natural or anthropogenic disturbances. However weather effects on forest productivity are not currently represented in inventory-based models such as CBM-CFS3 used in national forest C accounting programs. To evaluate different approaches to modelling these effects, a model intercomparison was conducted among CBM-CFS3 and four process models (ecosys, CN-CLASS, Can-IBIS and 3PG) over a 2500 ha landscape in the Oyster River (OR) area of British Columbia, Canada. The process models used local weather data to simulate net primary productivity (NPP), net ecosystem productivity (NEP) and net biome productivity (NBP) from 1920 to 2005. Other inputs used by the process and inventory models were generated from soil, land cover and disturbance records. During a period of intense disturbance from 1928 to 1943, simulated NBP diverged considerably among the models. This divergence was attributed to differences among models in the sizes of detrital and humus C stocks in different soil layers to which a uniform set of soil C transformation coefficients was applied during disturbances. After the disturbance period, divergence in modelled NBP among models was much smaller, and attributed mainly to differences in simulated NPP caused by different approaches to modelling weather effects on productivity. In spite of these differences, age-detrended variation in annual NPP and NEP of closed canopy forest stands was negatively correlated with mean daily maximum air temperature during July-September (T_amax) in all process models (R² = 0.4-0.6), indicating that these correlations were robust. The negative correlation between T_amax and NEP was attributed to different processes in different models, which were tested by comparing CO₂ fluxes from these models with those measured by eddy covariance (EC) under contrasting air temperatures (T_a). The general agreement in sensitivity of annual NPP to T_amax among the process models led to the development of a generalized algorithm for weather effects on NPP of coastal temperate coniferous forests for use in inventory-based models such as CBM-CFS3: NPP′ = NPP − 57.1 (T_amax − 18.6), where NPP and NPP′ are the current and temperature-adjusted annual NPP estimates from the inventory-based model, 18.6 is the long-term mean daily maximum air temperature during July-September, and T_amax is the mean value for the current year. Our analysis indicated that the sensitivity of NPP to T_amax was nonlinear, so that this algorithm should not be extrapolated beyond the conditions of this study. However the process-based methodology to estimate weather effects on NPP and NEP developed in this study is widely applicable to other forest types and may be adopted for other inventory based forest carbon cycle models.     

Zn-TiO2纳米管的光催化活性

采用水热合成-浸渍法制备锌掺杂TiO2纳米管(Zn-TiO2纳米管),透射电镜照片显示Zn-TiO2纳米管为两端开口形貌均一的中空管状结构,管径约6～8 nm,壁厚约1 nm,长度约50～200 nm。研究了Zn-TiO2纳米管对甲基橙的光催化性能,结果表明:掺杂适量锌提高了TiO2纳米管对甲基橙的光催化降解性能,0.4%Zn-TiO2纳米管的光催化性能最佳。同时还探讨了Zn-TiO2纳米管用量和初始pH值等因素对光催化降解甲基橙的影响,结果显示Zn-TiO2纳米管能有效地降解甲基橙。随着光催化反应进行,CODCr去除率和脱色率变化规律不完全相同,可能是由于芳基和烷基降解速率不同所致。     

ZnTiO3-TiO2复合光催化剂的制备及光催化降解有机污染物机制分析

TiO_2光催化剂因无毒无害而在光催化降解污染物领域有巨大潜力.但由于TiO_2的光生电子空穴复合较快,量子效率较低,限制了它的广泛使用.在本研究中,通过溶胶-凝胶(Sol-Gel)法制备了ZnTiO_3-TiO_2异质结复合光催化剂,分析了配比和煅烧温度对材料光催化性能的影响,以甲基橙(MO)溶液为模拟污染物进行光催化降解,探讨了其催化效果及效率提升的机制.结果表明,在紫外光照射下,ZnTiO_3与TiO_2比值为0. 3时,在600℃下煅烧3 h后,其催化效果最佳且表现出良好的化学稳定性.通过光电流测试和电子自旋共振波谱仪的检测结果,证明复合光催化剂的光生电子和空穴复合率降低,从而提高了光催化活性.     

工业换热设备的能效评价意义及方法

本文从节能角度,阐述了换热器能效评价的意义;根据换热器的用途,将其分为工艺换热器和辅助换热器,以此为基础,介绍影响换热器能效的主要因素;从我国目前对换热器能效评价的现状出发,提出热力学参数法一用传递有效度方法适合目前的技术水平现状,并简要介绍了该方法的原理和应用。本文的研究,希望对我国换热器能效评级工作有所帮助。