自养脱氮污泥的亚硝化活性恢复策略

为考察自养脱氮污泥亚硝化活性快速恢复的策略,在3个反应器内分别采用不同的方法对经过长期冷冻保存后的污泥进行了恢复活性的研究.其中R1为MBR(膜生物反应器),采用低ρ(DO)(0.30 mg/L)连续流恢复策略;R2为SBR(序批式反应器),采用低ρ(DO)(0.30 mg/L)间歇流恢复策略;R3为SBR,采用低ρ(NH₄+-N)预培养-高曝气-低ρ(DO)运行三阶段的恢复策略.结果表明,R1的恢复时间为46 d,NH₄+-N氧化速率达到4.99 mg/(h·g)(以N计),最终ρ(MLSS)达到5.43 g/L;R2的恢复时间为39 d,NH₄+-N氧化速率达到4.61 mg/(h·g),最终ρ(MLSS)达到4.47 g/L;R3的恢复时间为48 d,NH₄+-N氧化速率达到5.64 mg/(h·g),最终ρ(MLSS)达到5.16 g/L. 3个反应器均能长期抑制亚硝酸盐氧化细菌的活性,使亚硝化稳定运行. 3个反应器中,R3恢复所需时间最长,但污泥活性最好; R1中的污泥活性较低,但是膜组件有效截留了污泥,达到了最高的ρ(MLSS).研究显示,通过厌氧预培养后转为膜生物反应器连续流运行的策略,可有助于污泥的极大保留及污泥活性的最大恢复.      

TiO2/PS/Fe3O4 光催化剂的低温制备及其光催化和磁回收性能

以聚苯乙烯(PS)包覆油酸修饰过的纳米Fe3O4为磁核,在低温(90℃)、中性(pH=7左右)条件下,制备了以PS为惰性隔离层的磁载TiO2光催化剂.用X射线衍射仪(XRD)、透射电子显微镜(TEM)、傅里叶红外分光光度计(FT-IR)、振动样品磁强计(VSM)对催化剂的物相组成、形貌、表面性质、磁学性质进行了表征.以苯酚为模拟污染物,考察了其光催化活性,以自制的磁回收装置,考察其回收特性.结果表明,低温制备的TiO2为锐钛矿结构,平均粒径为2～5 nm,催化剂TiO2/PS/Fe3O4[其中物质的量比为n(TiO2)∶n(St)∶n(Fe3O4)=60∶2.5∶1]具有结构完整的壳/壳/核结构,TiO2在PS/Fe3O4表面负载牢固;光催化降解苯酚遵循一级反应动力学方程,TiO2/PS/Fe3O4[n(TiO2)∶n(St)∶n(Fe3O4)=60∶2.5∶1]的反应速率常数K=0.025 8,与纯TiO2的活性接近(K=0.026 2);循环使用5次后,反应速率常数仅降低0.003 4.所制催化剂具有较强的磁感应强度,平均回收率可达到92%以上.该低温水解法制备的磁载TiO2光催化剂具有良好的应用前景.     

吸附法油气回收系统在成品油库中的应用

介绍了活性炭吸附法油气回收系统在成品油库汽油装车过程中的应用情况。结合油库油气回收改造的实际情况,重点介绍了了吸附法油气回收装置的工艺流程、油库油气回收系统的组成、监控系统主要功能、环保检测的相关事项,并分析了油气回收系统的经济效益,结合实际经验对油库油气回收改造提出了建议。     

酸性水汽提及硫磺回收工艺的研究及应用研究

文章主要通过对酸性水气体及硫磺回收工艺特点的介绍与比选,着重分析“无在线炉硫磺回收及尾气处理工艺”（SSR）,其中硫回收为一段高温转化,二级催化转化的克劳斯工艺,尾气处理为加氢还原一吸收工艺,并介绍原辅材料成分及处理效率。该工艺能够有效解决石化企业的酸性气及酸水排放问题,具有良好的社会、环境效益显著。     

溪源宫水源保护区浮游植物群落结构分析研究

文章主要对2011年8月至12月溪源宫水源保护区浮游植物群落结构进行调查分析。溪源宫水体共鉴定出浮游植物6门51属137种,主要都是以绿藻门、硅藻门、蓝藻门为主。通过采用浮游植物生物量以及多样性指数对研究区域水体进行了评价,结果表明溪源宫水源保护区水质状况较好。同时还将溪源宫水源保护区、闽江、山仔水库等不同水源地的浮游植物群落结构进行对比分析,发现不同营养状态下,水体中浮游植物群落结构有显著的不同。     

乡镇垃圾综合利用途径分析研究

社会主义新农村建设推动了乡镇经济的发展,但乡镇的环境问题并没有随之解决,而固体废弃物的综合利用成为解决当前乡镇环境问题的有效手段之一。乡镇垃圾现状分析表明,其组分以有机易腐成分为主．不适用于城市垃圾的处理方式。乡镇垃圾经合理分类,其综合利用的主要途径有三条,包括可回收垃圾一回收一循环再利用,有机垃圾制肥-肥料-回田,餐厨垃圾、人畜粪便、秸秆等有机垃圾厌氧发酵-沼气-热能或电能。该途径可最终实现乡镇垃圾的资源化和能源化。     

广东省电子废物回收处理体系建设对策研究

广东省的电子废物产生量大,亟须建立规范的回收处理处置体系,实现资源的有序回收利用,避免电子废物的不当拆解处理造成环境污染。针对广东省电子废物回收处理的现状和存在问题,提出建设规模化的集中处理体系,产业化的回收利用体系和规范化的统一监管体系的相关对策,以促进电子废物的无害化、减量化和资源化处理处置。     

吸附法油气回收装置中真空泵的安装与调试

简要介绍了济南分公司油气回收装置、真空泵的工作原理以及安装与调试应注意的问题.     

Sustainability issues in sheet metal forming processes: an overview

Environmental sustainability in manufacturing is nowadays an urgent and remarkable issue and the main concerns are related to more efficient use of materials and energy.In sheet metal forming processes there is still a lack of knowledge in this field mainly due to the need of a proper modelling of sustainability issues and factors to be taken into account. The aim of this paper is mainly to underline the state of the art from a forming point of view about the sustainability contributions offered in any phase of a product life cycle. Actually, a lack in terms of comprehensive contributions is present in the technical literature, thus, the authors try to give a sort of holistic vision aimed to provide basic guidelines in order to help in identifying the possible solutions with regard to all the phases of a forming product life cycle. The main attention was paid to sheet metal forming technologies. The paper gives an overview of the main topics concerning sheet metal forming problems related to energy and resource efficiency with the aim to stress the principal contributions which may derive from such processes to environmental performances of manufacturing.     

Antimicrobial activity of thin metallic silver flakes, waste products of a manufacturing process

The aim of the research was to develop new products and processes from a manufacturing waste from an Italian metallurgic company. The company produced thin silver metallic films and the production scraps were silver flakes. The possibility to use the silver flakes in water disinfection processes was studied. The antimicrobial activity of the flakes was investigated in batch using Escherichia coli as Gram-negative microorganism model. The flakes did not show any antimicrobial activity, so they were activated with two different processes: thermal activation in reducing atmosphere and chemical activation, obtaining, respectively, reduced flakes (RF) and chemical flakes (CF). The flakes, activated with either treatment, showed antimicrobial activity against E. coli. The kill rate was dependent on the type of activated flakes. The chemical flakes were more efficient than reduced flakes. The kill rate determined for 1 g of CF, 1.0 ± 0.2 min⁻¹, was greater than the kill rate determined for 1 g of RF, 0.069 ± 0.004 min⁻¹. This was confirmed also by the minimum inhibitory concentration values. It was demonstrated that the antimicrobial capability was dependent on flakes amount and on the type of aqueous medium. Furthermore, the flakes maintained their properties also when used a second time. Finally, the antimicrobial activities of flakes were tested in an effluent of a wastewater treatment plant where a variety of heterotrophic bacteria were present.