The centers of gravity and dynamic types of body shape of terrestrial invertebrates

In the framework of dynamic morphology theory, the centers of gravity and geometric centers of projections have been determined for the bodies of more than 182 forms of invertebrates, and these data have been used to distinguish four types of dynamic body shapes. It has been demonstrated that specific dynamic types of body shape are characteristic of individual taxa. In addition, there are a group of “transformers,” which may assume any dynamic type of shape, and a group of invertebrates with one predominant dynamic type.     

基于矿井通风三维仿真系统软件的矿用空气幕选型方法

根据矿井风流调节的具体要求,合理选择矿用空气幕的型号是应用矿用空气幕技术的关键。在分析矿用空气幕选型依据及原理的基础上,应用矿井通风三维仿真系统软件模拟矿用空气幕运行的效果,来研究确定矿用空气幕的选型参数及影响因素。结果表明,应用矿井通风三维仿真系统软件所选择的矿用空气幕与理论推导的计算结果一致,此方法能够最大限度地反映矿山实际情况,具有直观、高效等特点。     

基于Matlab分析的台阶式场地平整方案优化设计

在某市餐厨垃圾处理厂场地平整设计中,利用Matlab软件对台阶式场地平整方案进行优化设计,即在Auto CAD环境下用等高线法计算各级台阶的土方量,用Matlab软件拟合出台阶设计高程和土方量的函数关系式,在约束条件下求解,得到了最优设计高程和基于土方挖填平衡条件下场地平整的最小土方工程量,为工程总平面布置提供优化方案。其分析设计方法可为工业企业台阶式场地的总平面布置设计提供借鉴。     

推进养殖污染防治,实现产业优化与环境保护双赢——对《水污染防治行动计划》的解读

针对《水污染防治行动计划》提出的畜禽养殖污染治理思路和措施,梳理了我国现阶段畜禽养殖污染防治中存在的问题,对《水污染防治行动计划》中提出的"调布局、建设施、促利用"三大举措进行了分析和解读,提出了落实《水污染防治行动计划》的几项重点工作,为地方推进畜禽养殖污染防治工作提供参考。     

基于井口涌水量变化类型判断岩溶含水层厚度

针对含水相对均匀的溶洞-裂隙水含水岩组,为判断岩溶含水层厚度,通过对空气潜孔锤钻进工艺施工钻孔井口涌水量变化进行分析,结果发现:利用该工艺施工的钻孔井口涌水量一般会出现稳定型、降低型和增长型三种变化类型;井口涌水量变化类型反映了岩溶含水层是空间尺度上发育的垂向地下水系统,具有分层特征,其厚度与碳酸盐岩岩溶化程度的不均一性耦合,体现了碳酸盐岩岩体内不同空隙的发育规模、密度及其相互间的联系程度;明确了地下水埋深状况以及含水层的构成条件。故采用空气潜孔锤钻进工艺施工的钻孔,在非干孔情形下,可以利用井口涌水量的变化类型判断岩溶含水层厚度。     

城市土地利用类型与PM2.5浓度相关性研究——以武汉市为例

随着我国工业化的不断发展,在我国的主要经济发展地区的雾霾天气不断爆发,使我国的大气环境日益恶化,严重影响了人们的日常生活和身体健康。PM2.5作为雾霾的重要组成成分,也日渐成为环境领域的研究热点问题。随着全球性变化研究领域逐渐加强了对土地利用与生态环境的相关研究,因此无论从法律和社会经济发展的角度,还是从生态资源保护与环境可持续发展的角度,土地利用与PM2.5的相关研究都显得相当重要。研究目的:分析武汉市各类用地类型与PM2.5浓度的相关性程度。研究方法:使用ENVI与ArcGIS对武汉市2013年MODIS气溶胶产品进行空间分析与插值处理,再应用SPSS将其与武汉市2013年10个观测点的PM2.5浓度数据作相关性分析,以证实MODIS气溶胶厚度与PM2.5浓度的相关性,并建立两者的线性回归方程,然后利用计算后的武汉市整体PM2.5浓度分布与各土地利用类型进行相关性研究。研究结果:武汉市PM2.5浓度有明显的空间分布特征,绿化面积比例与PM2.5浓度呈显著负相关,建设用地面积比例与PM2.5浓度呈显著正相关,未利用地面积比例虽然与PM2.5浓度呈正相关,但相关性较低,而耕地与水体对PM2.5浓度没有显著影响。研究结论:土地利用类型对武汉市PM2.5浓度的分布有显著的影响,其与搭载MODIS传感器的遥感卫星监测方式的结合能成为研究大范围特定区域PM2.5浓度空间格局的新方法,并且增加城市绿化面积,控制建设用地规模能有效减少PM2.5浓度。     

基于低碳经济理论视角的现代循环农业发展战略与对策

随着资源的紧张和环境的恶化,发展现代循环农业对提高资源利用率和环境保护具有至关重要的意义。因此本文从低碳经济理论的内涵与发展、现代循环农业与主要技术对策、绿色农业视野三个层面的资源循环利用来综合分析如何发展现代农业。     

黄河三角洲自然保护区秋冬季水鸟群落组成与生境关系分析

于2014年10月至2015年1月采用样线调查法对黄河三角洲自然保护区秋季迁徙期和越冬期水鸟群落结构进行调查研究,调查共包括8条样线40个观测点.结果表明:(1)秋季迁徙期共记录水鸟6目14科54种,国家Ⅰ级保护鸟类5种,国家Ⅱ级保护鸟类8种;越冬期共记录水鸟5目7科31种,国家Ⅰ级保护鸟类1种,国家Ⅱ级保护鸟类4种.(2)2个时期雁形目水鸟种类和数量均占优势,豆雁(Anser fabalis)、斑嘴鸭(Anas poecilorhycha)、赤膀鸭(Anas strepera)和绿头鸭(Anas platyrhynchos)为优势物种,丹顶鹤(Grus japonensis)、东方白鹳(Ciconia boyciana)和大大鹅(Cygnus cygnus)等珍稀水鸟也有一定的种群数量.(3)秋季迁徙期水鸟种数、数量和ShannonWiener多样性指数多于或高于越冬期.(4)5种典型生境之间水鸟种类和数量存在差异,天然水域是水鸟群落的主要分布区.(5)自然生境内的水鸟种数、数量和Shannon-Wiener多样性指数一般多于或高于人工生境.相似性分析结果表明,自然生境之间水鸟群落结构相似程度高于人工生境.     

川藏铁路四川段沿线诱发地质灾害降水阈值研究

利用2009—2019年川藏铁路沿线四川段地质灾害数据、国家气象中心逐小时降水量资料,统计了地质灾害与降水的关系,发现研究区89%的滑坡灾害和96.6%的泥石流均发生在汛期,且地质灾害高发路段位于青衣江暴雨区,与四川地区降水时空分布特征相吻合。分析雨型、降雨强度、前期降雨等因子对地质灾害的影响,发现快速激发,中速激发和慢速激发的地质灾害分别约占33.3%、25.9%、40.8%,表明降雨历时并不是影响地质灾害发生的最直接因子,前期降雨的作用不可忽视;结合环境因子对地质灾害进行了分区,基于降雨历时-雨强(I-D)预报模型建立了川藏铁路沿线四川段引发地质灾害的降水阈值分布。利用该降水阈值的分布特征,检验了2019年引发地质灾害的降水量,发现阈值雨量的判别方法较为科学,具有较强的参考价值。     

Environmental resource footprinting of drug manufacturing: Effects of scale-up and tablet dosage

The formulation and scale-up of batch processes is one of the major challenges in the development of pharmaceutical dosage forms and at the same time a significant resource demanding process which is generally overlooked in environmental sustainability assessments. First, this paper proposes general trends in the experience curve of cumulative resource consumption of pharmaceutical tablet manufacturing of PREZISTA^® 800 mg through wet granulation (WG) at four consecutive scales in both R&D and manufacturing environments (resp. WG1 = 1 kg/h, WG5 = 5 kg/h, WG30 = 30 kg/h and WG240 = 240 kg/h). Second, the authors aim at evaluating the environmental impact from a life cycle perspective of a daily consumption of PREZISTA^® 2× 400 mg tablets versus the bioequivalent PREZISTA^® 800 mg tablet which was launched to enhance patient compliance. Environmental sustainability assessment was conducted at three different system boundaries, which enables identification, localization and eventually reduction of burdens, in this case natural resource extraction. Exergy Analysis (EA) was used at process level (α) and plant level (β) while a cradle-to-gate Exergetic Life Cycle Assessment (ELCA) was conducted at the overall industrial level (γ) by means of the CEENE method (Cumulative Exergy Extraction from the Natural Environment). Life cycle stages taken into account are Active Pharmaceutical Ingredient (API) production, Drug Product (DP) production and Packaging. At process level (α), the total resource extraction for the manufacturing of one daily dose of PREZISTA^® (800 mg tablet) amounted up to 0.44 MJ_ex at the smallest scale (WG1) while this amount proved to be reduced by 58%, 79% and 83% at WG5, WG30 and WG240 respectively. Expanding the boundaries to the overall industrial level (γ) reveals that the main resource demand is at the production of the Active Pharmaceutical Ingredient (API), excipients, packaging materials and cleaning media used in DP production. At the largest scale (WG240) the use of cleaning media during DP production contributes considerably less to the total resource extraction. Overall, the effect of scale-up and learning on resource consumption during DP production showed to possess a power-law experience curve y = 2.40 * x^−0.57 when shifting from WG1 (smallest lab scale) to WG240 (industrial manufacturing). Tablet dosage (2× 400 mg versus 1× 800 mg) did not significantly affect the absolute environmental burden. However, the relative contribution of resource categories did change due to the different production technology. It could be concluded that in meeting social and economic demands by launching the PREZISTA^® 800 mg tablet, no trade-off in environmental burden occurred. On the long term, future research should strive to take into account R&D processes and all services related to pipeline activities taking place prior to market launch and eventually to allocate impacts to the final product.