A framework for valuing the health benefits of improved bathing water quality in the River Irvine catchment

A simple model predicting bathing water concentrations of Escherichia coli from livestock in the Irvine catchment in SW Scotland has been adapted for intestinal enterococci (IE). This has been used to predict risk of bather illness by extrapolation of published data on bather IE exposure vs incidence of gastro-enteritis. Simulated reduction in the risk of illness by reduced faecal loading was multiplied by a willingness to pay for risk reduction to estimate the annual benefits of mitigation. Health benefits of reducing loading by 75% at Irvine Beach were estimated by a willingness to pay method to be about pound 276k pa. Estimated annualised costs of diffuse pollution mitigation measures across the catchment were higher (> pound 1m), and it is very unlikely that 75% mitigation is achievable with current stocking rates. Further work should explore the influence of uncertainty of model parameters, and use emerging epidemiological information on specific zoonotic pathogens such as E. coli O157 and Cryptosporidium. Other components of the value of clean water should also be included to obtain a complete estimate of the cost:benefit of mitigation.     

Development of a risk-based index for source water protection planning, which supports the reduction of pathogens from agricultural activity entering water resources

Source water protection planning (SWPP) is an approach to prevent contamination of ground and surface water in watersheds where these resources may be abstracted for drinking or used for recreation. For SWPP the hazards within a watershed that could contribute to water contamination are identified together with the pathways that link them to the water resource. In rural areas, farms are significant potential sources of pathogens. A risk-based index can be used to support the assessment of the potential for contamination following guidelines on safety and operational efficacy of processes and practices developed as beneficial approaches to agricultural land management. Evaluation of the health risk for a target population requires knowledge of the strength of the hazard with respect to the pathogen load (massxconcentration). Manure handling and on-site wastewater treatment systems form the most important hazards, and both can comprise confined and unconfined source elements. There is also a need to understand the modification of pathogen numbers (attenuation) together with characteristics of the established pathways (surface or subsurface), which allow the movement of the contaminant species from a source to a receptor (water source). Many practices for manure management have not been fully evaluated for their impact on pathogen survival and transport in the environment. A key component is the identification of potential pathways of contaminant transport. This requires the development of a suitable digital elevation model of the watershed for surface movement and information on local groundwater aquifer systems for subsurface flows. Both require detailed soils and geological information. The pathways to surface and groundwater resources can then be identified. Details of land management, farm management practices (including animal and manure management) and agronomic practices have to be obtained, possibly from questionnaires completed by each producer within the watershed. To confirm that potential pathways are active requires some microbial source tracking. One possibility is to identify the molecular types of Escherichia coli present in each hazard on a farm. An essential part of any such index is the identification of mitigation strategies and practices that can reduce the magnitude of the hazard or block open pathways.     

Risk assessment and prioritisation of contaminated sites on the catchment scale

Contaminated sites pose a significant threat to groundwater resources worldwide. Due to limited available resources a risk-based prioritisation of the remediation efforts is essential. Existing risk assessment tools are unsuitable for this purpose, because they consider each contaminated site separately and on a local scale, which makes it difficult to compare the impact from different sites. Hence a modelling tool for risk assessment of contaminated sites on the catchment scale has been developed. The CatchRisk screening tool evaluates the risk associated with each site in terms of its ability to contaminate abstracted groundwater in the catchment. The tool considers both the local scale and the catchment scale. At the local scale, a flexible, site specific leaching model that can be adjusted to the actual data availability is used to estimate the mass flux over time from identified sites. At the catchment scale, a transport model that utilises the source flux and a groundwater model covering the catchment is used to estimate the transient impact on the supply well. The CatchRisk model was tested on a groundwater catchment for a waterworks north of Copenhagen, Denmark. Even though data scarcity limited the application of the model, the sites that most likely caused the observed contamination at the waterworks were identified. The method was found to be valuable as a basis for prioritising point sources according to their impact on groundwater quality. The tool can also be used as a framework for testing hypotheses on the origin of contamination in the catchment and for identification of unknown contaminant sources.     

三维脚型测量技术及方法的研究

本文阐述了人体脚型的测量方法及特点,比较后得出人工测量与三维扫描测量技术之间的差别。以YETI三维脚型扫描仪为模型,详细分析了脚型扫描仪的结构原理,摸索并提出了简单实用的测量方法,讨论了YETI三维脚型扫描仪获得的原始数据、脚型横截面以及脚型投影图的特点。     

Carbon capture and storage-desirability from a risk management point of view

Environmental and safety risks related to carbon capture and storage concern leakages and accidental releases during transport and geological storage. Based on principles widely accepted in the EU and beyond in the discussion about the where’s and why’s of nuclear waste repositories, this paper discusses the desirability of carbon capture and storage from a risk management point of view, focusing on environmental risks on the global level (climate change). On this basis it is concluded that, if the key energy issue of coming generations, not just in Europe but all around the world, is not the abundance of fossil resources but rather an unacceptably high probability of global warming due to greenhouse gas emissions, then the solution should not include any massive hiding of the emissions but entirely focus on the avoidance based on improved technology in power plants and other industrial installations.     

Computerized Map of Risk to Manage Wildlife Species in Urban Areas

For the last 20 years, human–wildlife conflicts have been rapidly increasing in towns. Although people want “greener” cities, the expansion of disliked species causes problems that are difficult to manage and to reduce. The complexity of the numerous factors involved in these human–wildlife relations needs the development of a comprehensive tool for urban planners. Today, with the development of computers and geographical information systems, it is easier to analyze and combine different spatial data as methods used for the management of risks in studies of natural hazards. Here we present a method for assessing and mapping the risk in cases of human–wildlife conflict. An application to starling management in a town in western France will show the efficiency of our methods to combine information given by a network of experts and to highlight higher risk sites. The map of risk provides a spatial result useful for comprehension, communication between people and agencies, and public education.     

四川省区域经济不平衡发展特征分析

以地市州为基本经济单元,以1999年主要相对指标为依据,通过综合值测算法,将全省划分为四类经济发展水平不同的地区,对四类地区平均总量指标、相对指标进行了对比分析,并揭示了其空间分布特征,简要分析了各类地区经济发展的条件和方向;以1999年、1978年各地市州GDP为例,对比分析了四川省区域经济不平衡发展的动态性特征。     

江苏油田原水油珠粒径分布测定

测定了江苏油田黄珏污水站原水中油珠粒径分布,为合理选择和设计污水处理工艺与装置提供了必要的基础数据。实验测定江苏油田黄珏污水站原水含油量为62.3 mg/L。该站的三相分离器具有较好的油水分离能力。原水中浮油(粒径≥99.4μm)占8.3%,粒径≥28.4μm的分散油占14.3%,而粒径≤28.4μm的分散油、浮化油等约占77.4%。单纯采用重力沉降法可除去原水中22.6%的含油量。同时对油珠粒径分布测定方法进行了改进。新方法减少了水样含油量的测定工作量,且设备简单、操作方便。     

热真空设备中与温度相关的试验技术探讨

以RZHM-1400-AB型热真空试验箱为实例,简述设备主要工作原理。强调其温度传递方式及航天产品在热真空试验中温度参数的重要性。以无数试验数据为依据,着重论证何种类型测温传感器与实际设备相匹配,同时论证选取何种外形的测温传感器为最佳温度测量工具。同时,进一步介绍几种在热真空试验中使用这些测温传感器的方法,以减少不必要的人为测量误差。     

智能家电的低待机功耗研究

从智能家电待机工作状态入手,分析电器产品中参与待机工作的各部分电路原理,提出降低潜在功耗设计思路和计算方法,从家电设计研发阶段对待机功耗进行控制,同时对待机功耗精确测量方法关键点进行解读以控制低功耗测试不确定度,有助于低待机功耗设计和测量的标准化和规范化。