Plasma arc welding: Process,sensing, control and modeling

This article introduces the basic principles of plasma arc welding (PAW) and provides a survey of the latest research and applications in the field. The PAW process is compared to gas tungsten arc welding, its process characteristics are listed, the classification is made, and two modes of operation in PAW, i.e., melt-in and keyhole, are explained. The keyhole mechanism and its influencing factors are introduced. The sensing and control methodologies of the PAW process are reviewed. The coupled behaviors of weld pool and keyhole, the heat transfer and fluid flow as well as three-dimensional modeling and simulation in PAW are discussed. Finally, a novel PAW process variant, the controlled pulse keyholing process and the corresponding experimental system are introduced.     

Influence of displacement constraints in thermomechanical analysis of laser micro-spot welding process

The evolution of mechanical components into smaller size generating a need for microwelding of these components using laser which offers better control as compared to arc and plasma processing. The present article describes the numerical simulation of laser micro-spot welding using finite element method. A two dimensional Gaussian distributed surface heat flux as a function of time is used to perform a sequentially coupled thermal and mechanical analysis. The model is used for simulating laser micro-spot welding of stainless steel sheet under different power conditions and configurations of mechanical constraints. The temperature dependent physical properties of SS304 have been considered for the simulation and an isotropic strain hardening model has been used. The simulated weld bead dimensions have been compared with experimental results and temperature profiles have been calculated. The maximum deformation of 0.02 mm is obtained with maximum laser power of 75 W. The thermal stress is more inducing factor to temperature induced residual stresses and plastic strain as compared to mechanical constraints. The plastic strain changes significantly by displacement constraints as compared to residual stress.     

Problems and issues in laser beam welding of aluminum–lithium alloys

Aluminum–lithium (Al–Li) alloys are very attractive for potential aerospace applications due to their lower density, higher specific strength and rigidity, better corrosion and fatigue crack growth resistance properties, compared to conventional aluminum alloys. Laser beam welding (LBW), being an advanced joining method, has already been approved for applications involving aluminum alloys. However, there are still a number of problems and issues to be answered and solved in LBW of Al–Li alloys. In this review, the properties of Al–Li alloys and the characteristics of LBW are introduced, the formation and prevention of the main weld defects such as porosity and hot cracking are discussed, and then the weld microstructure and the joint mechanical properties are described in highlight. At the end, an outlook on future trends is presented.     

A method for double-sided friction stir spot welding

A rotating anvil similar to a pinless friction stir welding (FSW) tool can be applied to friction stir spot welding (FSSW) of thin metal plates. FSSW is a solid-state joining process that is currently being used by automotive manufacturers as an alternative to rivets and traditional resistance spot welding. The principal detractor of this process is the keyhole left by pin extraction, which can be detrimental to the weld strength. A pinless tool can be used to eliminate the keyhole. However, this approach is limited to joining thin sheet (≤1 mm). Using a rotating anvil with the FSSW process permits the joining of thicker cross sections, improves the mechanical strength of the spot weld and reduces the reaction forces on the spot welding frame. A numerical model of the process, tensile shear tests and macrosection analysis are used to evaluate the spot welds.Macrosection and numerical analysis reveals that the material flow between the pinless tool and rotating anvil is complex and unique to this process. It has been found that the use of a rotating anvil for FSSW is a viable means to create quality spot welds in thicker weldments.     

油库设备焊割动火的安全防护

总结了油库设备焊割动火作业中油蒸气的清除、隔离方法及其组织实施要点,有利于油库整修改造过程中焊割动火作业的安全管理。