相对湿度测量数据的风速修正与压力修正举例

本文用四达公司生产的环境试验设备产品实测数据,讨论相对湿度风速修正与大气压力修正的必要性和计算方法.     

驾驶员自身因素对限速标志识别能力的影响分析

以研究城市道路限速标志下驾驶行为的变化为主要目的,基于认知心理学知识,采用实地观测和问卷调查等手段,研究了驾驶员经过限速标志时的心理及反应过程。依据认知工效学中的注意和记忆等机制对驾驶员的限速标志认知过程进行了解析;从驾驶员自身角度分析了影响驾驶员识别限速标志的主要因素;利用因子分析方法对调查数据和调查项目进行统计分析;最终提取了影响驾驶员识别限速标志的6个自身因素为主因子,作为限速标志对驾驶行为影响较大的因素。该研究结果可为城市道路限速标志的设计与设置提供科学依据。     

建筑物走廊型通道中火灾烟气流动特性的研究

应用网络模型方法,将建筑物走廊型通道合理地划分为多个节点,在火源为10kg木材的情况下,利用已开发成功的烟流性状预测软件对四川消防科研所的一座实体建筑物进行了模拟计算,获得了各节点烟流性状的发展变化规律。经比较,模型计算结果与实验数据十分符合。证明走廊型通道的多节点划分方法正确、预测软件实用可靠。根据烟气侵入走道中两节点的时间差及两节点间距,提出了烟气弥漫速度的计算方法。该算法与实测结果间的相对误差小于3%,实例应用及研究的成果,为建筑物火灾时安全疏散动态模拟研究提供了理论依据。     

烧结机头电除尘器的特点及选型探讨

随着烧结工艺的发展，排放标准的提高，对机头电除尘器的要求越来越严格。然而高碱度烧结和高负压操作法等生产工艺却对机头电除尘器造成严重影响。本文针对烧结机头电除尘器的烟气、烟尘特点，充分讨论机头电除尘器在选型时应该考虑的几个问题，以满足机头工艺除尘的要求，以达到净化烟气的目的。     

2004年夏季太湖梅梁湾席状漂浮水华风力漂移入湾量计算

太湖北部重度水华暴发时,在夏季盛行风推动下,漂浮的席状水华可由大太湖漂移进入位于太湖北部的梅梁湾,使湾内的水华加剧.本文通过室内风箱水槽实验和野外观测,对水华的风力漂移作了定量研究,建立了风速与水华漂移速度的指数相关方程.并据此对2004年夏季太湖北部发生席状水华的6d分别计算了水华风力漂移入湾量.6d中,只有2004-07-31水华漂移是由湾内向大太湖输出,且量很小,只有0.05 km²;其余5d水华漂移进入梅梁湾的面积占整个梅梁湾面积的3.7%～13.3%,进入量最大的是2004-06-11,达17.4km²,最少的是2004-07-30,为4.8 km².     

跨高速铁路桥梁基础防护桩设计与施工

武咸城际铁路在咸宁市上跨武广高速铁路,安全风险极大。论述了跨高速铁路桥梁基础承台防护桩的设计和施工,分析了防护桩设计的影响因素,确定了计算桩长。此外,从单桩承载力、桩基内力及基地应力三方面计算进行了安全性验证,确保了桥梁承台施工安全,对类似工程的基础安全防护有较好的借鉴作用。     

Effect of scale on freely propagating flames in aluminum dust clouds

The majority of experimental tests done on combustible dusts are performed in constant volume vessels that have limited or no optical access. Over the years, McGill University has been developing alternative experimental techniques based on direct observation of dust flames, yielding reliable fundamental parameters such as flame burning velocity, temperature and structure. The present work describes two new experimental set-ups allowing direct observation of isobaric and freely propagating dust flames at two sufficiently different scales to test the influence of scale on dust flame phenomena. In the laboratory-scale experiments, a few grams of aluminum powder are dispersed in transparent, 30 cm diameter latex balloons that allow for full visualization of the spherical flame propagation. In the field experiments, about 1 kg of aluminum powder is dispersed by a short pulse of air, forming a conical dust cloud with a total volume of about 5 m³. High-speed digital imaging is used to record the particle dispersal and flame propagation in both configurations. In the small-scale laboratory tests, the measured flame speed is found to be about 2.0 ± 0.2 m/s in fuel-rich aluminium clouds. The burning velocity, calculated by dividing the measured flame speed by the expansion factor deduced from thermodynamic equilibrium calculations, correlates well with the previously measured burning velocity of about 22–24 cm/s from Bunsen dust flames. Flame speeds observed in field experiments with large-scale clouds, however, are found to be much higher, in the range of 12 ± 2 m/s. Estimations are presented that show that the presumably greater role of radiative heat transfer in larger-scale aluminium flames is insufficient to explain the six-fold increase in flame speed. The role of residual large-eddy turbulence, as well as the frozen-turbulence effect leading to large-scale dust concentration fluctuations that cause flame folding, are discussed as two possible sources for the greater flame speed.     

Quantification of turbulence in cryogenic liquid using high speed flow visualization

A high speed flow visualization experiment was conducted to characterize the boiling induced turbulence when a cryogenic liquid is released on water. The advective transport of turbulent structures traversing through the liquid was captured and reconstructed using image processing software to obtain information on velocity components. The numerical results obtained from image processing were used to determine turbulence parameters like turbulent intensity, turbulent kinetic energy and eddy dissipation rate. An interesting aspect of the study was the formation of wavy structures called ‘thermals’ which were characteristic of turbulent convection. The thermals were found to act as a catalyst in increasing heat transfer and turbulence between water and cryogenic pool. The turbulent intensity was influenced by the turbulent velocity and had direct effects on the vaporization flux. Among the turbulence parameters, increase in turbulent kinetic energy resulted in faster vaporization of cryogenic liquid through enhanced mixing, whereas variations in the eddy dissipation rate had weak dependence on vaporization. Additionally, the initial height of cryogenic liquid was also found to strongly affect the vaporization mass flux.     

基于DRYESM模型的红枫水库水体热分层特征及关键控制因素模拟研究

水温结构是湖库生态系统演化的重要基础,热分层稳定性对深水湖库水体物理、化学和生物演化具有重要影响,因此研究水体热分层特征及关键控制因素具有重要意义。本文运用DYRESM水动力模型模拟了红枫水库2014年全年的水温变化特征,并对影响水体热分层结构的关键控制因素进行了探究。结果表明:1) DYRESM水动力学模型可有效模拟红枫水库的水体热分层特征及时间演化规律,可准确预测水体热分层形成和消亡的时间及去分层强度。2)气温变化对水库水体热分层具有明显影响,增温可加速水体热分层的形成,造成温跃层下潜和去分层延迟;短波辐射的增强(40%)不会对红枫湖水温结构造成明显影响,但可导致去分层发生时间后延;风速是水体热分层稳定性的敏感因素,当风速增加40%后,热分层演化发生较大变化,表现在6～9月份中层及底层水温大幅升高(从9℃上升到14℃),去分层时间提前30天,相应造成分层期缩短。