低温等离子体催化氧化甲烷的实验研究

采用电容耦合等离子体和催化剂协同作用对干空气中的甲烷进行了氧化实验，并和没有放置催化剂时进行了对比，结果表明，放置催化剂后甲烷的分解效率明显提高，反应产物中CO2的选择性增加，副产物NO和NO2的浓度减少．反应所需的能耗降低。甲烷的最终氧化产物为CO、CO2和H2O。     

SCR 催化剂的砷中毒研究

催化剂是SCP系统的重要组成部分,研究催化剂中毒的原因,对延长催化剂的使用寿命及降低SCR系统的运行费用意义重大.本文介绍了煤燃烧过程中砷的迁移规律,利用实验的方法测定出氧化砷浓度与催化剂中毒的关系,建立了砷中毒后NOX反应速率的动力学方程,并利用国外几组SCR数据对方程进行了验证,计算值和实际值相吻合.文章并对如何降低砷的危害提出了建议.     

Effects of WOx modification on the activity, adsorption and redox properties of CeO2 catalyst for NOx reduction with ammonia

A series of WO₃/CeO₂ (WOx/CeO₂) catalysts were synthesized by wet impregnation of ammonium metatungstate on a CeO₂ support. The resulting solid acid catalysts were characterized by X-ray diffraction (XRD), UV-Vis spectroscopy (UV-Vis), Raman spectroscopy (Raman), in-situ Fourier transform infrared spectroscopy (in-situ FT-IR) of ammonia adsorption, NH₃-TPD, H₂ temperature-programmed reduction (H₂-TPR), NH₃/NO oxidation and activity measurements for NOx reduction by NH₃ (NH₃-SCR). The results show that polytungstate (WOx) species are the main species of tungsten oxide on the surface of ceria. The addition of tungsten oxide enhances the Brönsted acidity of ceria catalysts remarkably and decreases the amount of surface oxygen on ceria, with strong interaction between CeO₂ and WOx. As a result, the N₂ selectivity of NH₃ oxidation and NH₃-SCR at high temperatures (> 300℃) is enhanced. Therefore, a wide working temperature window in which NOx conversion exceeds 80% (NOx conversion > 80%) from 200 to 450℃, is achieved over 10 wt.% WOx/CeO₂ catalyst. A tentative model of the NH₃-SCR reaction route on WOx/CeO₂ catalysts is presented.     

钢铁厂烧结烟气SCR脱硝技术应用探讨

目前烧结烟气脱硝主要采用活性炭(焦)吸附技术,投资及运行费用极高。SCR(选择性催化还原)烟气脱硝技术广泛应用于燃煤锅炉,技术成熟可靠。针对钢铁厂烧结烟气的特点,探讨了将SCR烟气脱硝技术应用于烧结烟气脱硝;通过适当的工艺优化和技术创新,烧结烟气采用SCR脱硝技术完全可行,经济适用。     

新型汽车尾气净化催化剂的研究

研究Ｌａ－Ｃｏ－Ｃｕ－Ｍｎ－Ｃｅ－Ｐｄ催化剂的活性和热稳定性,结果表明,该催化剂具有低温活性良好、活性高以及热稳定性好的性能特点,对ＣＯ、ＨＣ氧化的Ｔ５０％和Ｔ１００％分别约为１８２℃,２３８℃和２４０℃、２６５℃,催化剂表面组分发生强相互作用形成３种活性中心,是催化剂低的起燃温度,高活性的原因。催化剂高温处理后未发生烧结,活性未下降,热稳定性良好。     

预磁化强化ZnO@Fe3O4活化PMS降解AO7

为了研究预磁化对ZnO@Fe_3O_4活化过一硫酸盐(PMS)去除水中酸性橙7(AO7)性能的影响,考察了预磁化强度、ZnO@Fe_3O_4投量、PMS投量及初始pH对Mag-ZnO@Fe_3O_4/PMS体系降解AO7效果的影响.结果表明,当预磁化强度由0 T逐渐增大至2 T时,催化剂去除AO7的表观速率常数由0.0463 min~(-1)逐渐增大至0.1832 min~(-1),反应速率提高倍数达到1.4～4.0倍; Mag-ZnO@Fe_3O_4和PMS投量的增加对AO7的去除率均有提升效果,在最优条件下反应20 min后AO7的去除率达92%;体系初始pH对AO7降解有显著影响, pH为6～8条件下有利于Mag-ZnO@Fe_3O_4催化PMS氧化反应的进行.通过投加不同种类的猝灭剂,证实了AO7的降解主要是各种自由基共同作用的结果.经过预磁化处理后的催化剂产生感应磁场,从而影响了反应体系中自由基的复合概率,使得污染物被自由基氧化的速率提高.     

试用平炉尘制备中温变换催化剂

利用钢铁厂平炉尘制备中温变换催化剂,制备成本低,工艺简单,活性达到部颁标准,具有明显的经济效益.     

铁催化聚丙烯腈脱氮的研究

应用热天平研究了载铁聚丙烯腈的脱氮碳化行为，负载铁对ＰＡＮ的稳定化和脱氮碳化均具有显著的催化作用，并在５８０－７６０℃范围内明显增加了Ｎ２形成速率。ＸＰＳ和ＸＲＤ对碳化过程中铁和氮化学形态变化的研究结果表明，铁催化反应机理可能是负载铁与吡啶氮作用形成中间体铁氮化物，后者进而分解释放出Ｎ２。     

Fe-MnOx-CeO2/ZrO2低温催化还原NO性能研究

以纳米ZrO2为载体,用浸渍法制备出Fe-MnOx-CeO2/ZrO2催化剂,考察了活性组分配比和助剂负载量对催化剂低温NH3选择性催化还原NO活性的影响,并对催化剂进行了XRD、SEM、EDS和BET表征;探讨了温度、H2O和SO2对Fe-MnOx-CeO2/ZrO2催化剂低温下NH3选择性催化还原NO的影响,结果表明,无SO2和H2O条件下,8%Fe-10%MnOx-CeO2/ZrO2催化剂具有良好的催化活性和稳定性.120℃时,催化剂的脱硝效率为85.23%,当温度升至180℃时,脱硝效率可达到92.0%.SO2和H2O共存条件下,催化剂易失活,采用傅立叶变换红外光谱对各反应阶段的催化剂进行了表征,对其失活机制进行深入研究,结果表明,催化剂失活的主要原因是催化剂表面硫酸铵盐的沉积和催化剂本身活性成分的硫酸盐化.     

Chemical poison and regeneration of SCR catalysts for NOx removal from stationary sources

Selective catalytic reduction (SCR) of NO_x with NH₃ is an effective technique to remove NO_x from stationary sources, such as coal-fired power plant and industrial boilers. Some of elements in the fly ash deactivate the catalyst due to strong chemisorptions on the active sites. The poisons may act by simply blocking active sites or alter the adsorption behaviors of reactants and products by an electronic interaction. This review is mainly focused on the chemical poisoning on V₂O₅-based catalysts, environmental-benign catalysts and low temperature catalysts. Several common poisons including alkali/alkaline earth metals, SO₂ and heavy metals etc. are referred and their poisoning mechanisms on catalysts are discussed. The regeneration methods of poisoned catalysts and the development of poison-resistance catalysts are also compared and analyzed. Finally, future research directions in developing poisoning resistance catalysts and facile efficient regeneration methods for SCR catalysts are proposed.