Effect of tracer dyes on initial deposits and persistence of bacillus thuringiensis subsp. kurstaki toxin after application of two commercial formulations onto spruce trees

Abstract

The effect of two tracer dyes [Erio Acid Red (EAR) and Acid Black 48 (AB‐48)] on initial deposits and persistence of Bacillus thuringiensis subsp. kurstaki (Btk) toxin (delta‐endotoxin) was studied after spraying two commercial formulations, Foray® 48B and Foray® 76B, over potted white spruce [Picea glauca (Moench) Voss] seedlings, at a dosage rate of 30 billion international units (BIU) per ha. Spray was applied using a spinning disc atomizer calibrated to deliver droplet sizes similar to those utilized in ultra‐low‐volume (ULV) treatments in operational insect control programs. The sprayed seedlings were left outdoors at the Sault Ste. Marie laboratory for 18 days under natural conditions of sunlight, wind and rainfall. Initial deposits and persistence of delta‐endotoxin protein in spruce foliage were determined by immunoassay [enzyme linked immunosorbent assay (ELISA)] quantification of the delta‐endotoxin. The total protein (inactive plus active) and delta‐endotoxin (active protein) concentrations in the two formulations were determined by a gravimetric procedure and by ELISA respectively.

The initial deposit levels of the toxin on foliage were not markedly affected by the addition of either of the two tracer dyes, and showed only a narrow range of 1521 to 1625 ng/g foliage (fresh weight) for Foray 48B, and 1789 to 2056 ng/g for Foray 76B. However, the persistence of the toxin was significantly influenced by the presence of the dyes. The toxin persisted in foliage only for 7 d post‐spray When the EAR dye was added to Foray 48B, compared to 10 d when no dye was added. The average half‐life (DT₅₀) of disappearance was 17.4 h for Foray 48B with EAR, and 20.9 h when no dye was present. In contrast, the situation was reversed in Foray 76B, since the duration of persistence was 10 d when EAR was added to Foray 76B, compared to 7 d when no dye was added. The average DT₅₀ was 27.9 h for Foray 76B with EAR, and 22.2 h without the dye. Persistence was the longest (14 d) when the AB‐48 dye was added to Foray 76B, and the DT₅₀ was 44.9 h.     

Satellites viewing our world: The NASA landsat and the NOAA SMS/GOES

Thousands of individuals throughout the world are now users of satellite data. Hundreds of satellites have been launched—military, navigation, communications, educational, weather, and earth resources. One of the weather satellites (the SMS/GOES) and the NASA earth resources mapping satellite (Landsat) are the subjects of this article. Data from these systems have been highly cost beneficial, not only in the United States, but in developed and developing nations all over the globe as well. There is an increasing demand both for data and for training in data use.Data samples are shown and applications are discussed. Strong reference is made to the value of the digital computer in natural and man-made features mapping and monitoring. Procedures for acquiring NASA data are explained so that the reader may order data for his home region, or for other regions throughout the world which are of interest for their agriculture, forestry, hydrology, marine resources, geology, or land use. The cost of data is incredibly low; some products cost as little as three dollars.Also discussed are the remotely based data-collection platforms that acquire ground or water data daily and relay results to the NASA Landsat or to the NOAA SMS/GOES.     

电沉积处理含镉废水的性能研究

电沉积含镉废水考察溶液的不同初始p H、镉的不同初始浓度、电流密度及金属配合物对电沉积效果的影响,利用SEM和XRD对沉积物的表面形貌和物相成分进行分析,研究沉积物金属的存在形式。实验结果表明,p H在1.5~3.5时,溶液中镉的去除效果达到99.3%;一级动力学常数随着初始镉溶液浓度增加而变大;当电流密度为4.46 m A/cm2进行90 min电沉积时反应速率较快且沉积量最大;氨水与镉形成的配合物可以促进电沉积镉的反应速率;对电沉积后的沉积物进行扫描电镜(SEM)和X-射线衍射(XRD)测试。SEM表明,沉积物呈现树枝状的纳米结构。XRD表明,沉积物主要成分为氢氧化镉和镉。     

Ce-MCM-22分子筛的合成与吸附动力学研究

采用静态水热晶化法,以硅溶胶为硅源、六亚甲基亚胺(HMI)为模板剂,通过掺杂Ce合成了具有MWW层状结构的Ce-MCM-22分子筛。并利用粉末X-射线衍射(XRD)、扫描电镜(SEM)、透射电镜(TEM)等方法对其进行了表征,对其进行了吸附动力学的研究。研究表明,Ce-MCM-22吸附动力方程拟一级方程为y=-0.028 1x-0.136,R2=0.983 4。Ce-MCM-22吸附动力方程拟二级方程为y=0.465 7x+1.2005,R2=0.999 5,说明拟二级反应模型更能真实地反映分子筛吸附亚甲蓝溶液的反应机理。     

不同条件下进行渗后扩散的铝硅涂层氧化行为研究

目的提高铝硅涂层的抗氧化性能。方法采用料浆法在DZ417G定向凝固镍基高温合金叶片的燃气流道表面制备铝硅防护涂层,通过扫描电子显微镜(SEM)分析不同条件下进行渗后扩散的铝硅涂层表面显微组织形貌和截面显微组织形貌。结果无保护气氛下进行渗后扩散处理的铝硅涂层,在扩散过程中就已经发生了氧化,氧化过程首先形成多孔非致密结构的θ-Al_2O_3相,随着氧化过程的进行,θ-Al_2O_3相逐渐转变成致密结构的α-Al_2O_3相,从而起到真正的抗氧化作用。结论铝硅涂层中的Al元素提前被消耗,对铝硅涂层的使用寿命存在一定影响,因而渗后扩散须保证在真空条件下或有保护气氛条件下进行,使叶片表面渗后的铝浓度达到一定的要求,从而在使用过程中可以生成致密结构的α-Al_2O_3相,起到抗氧化作用,提高叶片的使用寿命。     

钢筋混凝土旧工业厂房主体结构的改造加固风险研究

为探索钢筋混凝土旧工业厂房的改造与加固风险,进行了实地调研和基础理论研究,借助SPSS 22.0统计软件对32个二级指标进行筛选,确立6个方面29个指标的改造加固风险评价指标体系,运用结构方程模型（SEM）实证分析关键影响因素及其作用路径。研究结果表明:设计方案、结构特征和施工技术对改造加固风险具有影响;结构特征与设计方案之间的强关联形成了隐性且重要的风险路径。基于关键影响因素及因素间关联关系,对宝鸡市某U型厂房主体结构加固实例提出建议,为此类项目的改造施工提供理论依据。     

建筑安全事故防范认知与主体身份特征关系诊断研究

为进一步研究建筑安全主体的身份特征对建筑安全事故防范认知的影响,通过分析现有文献,对建筑安全主体身份特征、建筑安全管理认知、建筑安全技术措施认知和建筑安全事故防范认知4个因素分别进行探讨,并提出其相互之间的关系假设。基于结构方程模型(SEM)方法,构建由4个因子16个观测变量组成的指标体系。采用LISREL8.53软件,验证因子及观测变量之间的关系。个案研究结果表明,主体身份特征对建筑安全管理认知、安全技术措施认知和建筑安全事故防范认知具有较强的社会属性效应,主体身份特征通过建筑安全管理认知、安全技术措施认知对建筑安全事故防范认知的正效应也比较明显。重塑建筑安全主体社会属性、加强安全管理和技术措施教育,均能有效提高建筑安全事故防范认知。     

Particle emissions of a railway line determined by detailed single particle analysis

The goal of this study was to identify and quantify particles emitted from railway traffic. For that purpose PM10 samples were collected near a busy railway line using a wind direction and speed controlled sampling equipment consisting of five devices. Measurements taken perpendicular to the railway lines at 10, 36 and 120 m distance enable an identification and separation of particles caused by the railway traffic from background particles. Morphology and chemistry of more than 11,000 particles were analysed by computer controlled scanning electron microscopy (CCSEM). Based on chemical composition five particle classes are defined and assigned to their sources. The mass of the individual particles is determined by multiplying their volumes, calculated based on their morphology with a density assigned specifically to each particle class. The density of the particle classes is derived from their chemical composition. To estimate the PM10 contributions of the railway lines, the mass of PM10 at 120 m (background, not influenced by the railway lines) is subtracted from the mass of PM10 at 10 m. The emissions of the railway lines are dominated by ‘iron’ particles, which contribute 2.9 μg m⁻³ or 67% to the railway related PM10. In addition, ‘aluminium’ and ‘calcium’ particles contribute also to the railway related PM10 (1.0 μg m⁻³ or 23% for the ‘aluminium’ and 0.4 μg m⁻³ or 10% for the ‘calcium’ particles). These particles are assigned to abrasion of the gravel bed and re-suspension of mineral dust.Long-term gravimetric results of the contribution of iron to the mass of railway related PM10 from a study performed earlier at the same site are in good agreement with the data presented in this study.     

Fe-Cu催化还原法处理废水的稳定性分析

采用扫描电镜(SEM)和X射线衍射(XRD)技术对Fe-Cu催化还原法处理硝基苯配水反应前后铁屑和铜的表面进行分析,研究了Fe-Cu催化还原法的长期运行效果.结果表明,运行数周后铜表面性状基本保持不变,化学稳定性好,抗中毒能力强.处理效果的下降主要起因于铁屑表面的金属铁发生反应而被逐渐消耗,以及铁屑表面为沉淀物覆盖而逐渐失效.     

光化学氧化法处理垃圾渗滤液影响因素的研究

以光化学氧化法处理垃圾渗滤液为研究对象,对不同光反应器、H2O2的投加方式、渗滤液曝气、不同光源以及原水初始COD浓度等影响因素进行了探讨,实验结果表明：旋转式反应器对COD去除效果最高,降膜反应器虽效率略差,但结构简单,光源无污染,易于在工程中使用;H2O2一次性投加更有利于COD的去除;在合适时间段采取曝气方式可提高紫外光氧化反应速度;紫外灯光对COD去除较好,而太阳光对COD去除稍差,可能耗低、成本低,在污染物治理时有广阔的应用前景;COD去除效率随原水初始COD浓度的增加而增加。