Organic aerosol molecular composition and gas–particle partitioning coefficients at a Mediterranean site (Corsica)

Molecular speciation of atmospheric organic matter was investigated during a short summer field campaign performed in a citrus fruit field in northern Corsica(June 2011). Aimedat assessing the performance on the field of newly developed analytical protocols, this work focuses on the molecular composition of both gas and particulate phases and provides an insight into partitioning behavior of the semi-volatile oxygenated fraction. Limonene ozonolysis tracers were specifically searched for, according to gas chromatography–mass spectrometry(GC–MS) data previously recorded for smog chamber experiments. A screening of other oxygenated species present in the field atmosphere was also performed. About sixty polar molecules were positively or tentatively identified in gas and/or particle phases. These molecules comprise a wide range of branched and linear, mono and di-carbonyls(C_3–C7),mono and di-carboxylic acids(C_3–C_18), and compounds bearing up to three functionalities.Among these compounds, some can be specifically attributed to limonene oxidation and others can be related to α- or β-pinene oxidation. This provides an original snapshot of the organic matter composition at a Mediterranean site in summer. Furthermore, for compounds identified and quantified in both gaseous and particulate phases, an experimental gas/particle partitioning coefficient was determined. Several volatile products, which are not expected in the particulate phase assuming thermodynamic equilibrium, were nonetheless present in significant concentrations. Hypotheses are proposed to explain these observations, such as the possible aerosol viscosity that could hinder the theoretical equilibrium to be rapidly reached.     

医疗废物高温蒸汽处理工艺的二次污染控制——以孝感市医疗废物处置中心为例

以孝感市医疗废物处置中心为例,介绍了高温蒸汽处理过程的二次污染控制工艺。结果表明:采用生物脱臭处理工艺,废气中的恶臭污染物可以达到《恶臭污染排放控制标准》(GB 14554—1993)相应排放速率限值要求;采用生化和物化相结合的废水处理工艺,出水水质可以满足《污水综合排放标准》(GB 8978—1996)的二级排放标准要求。     

Beyond the material grave: Life Cycle Impact Assessment of leaching from secondary materials in road and earth constructions

In industrialized countries, large amounts of mineral wastes are produced. They are re-used in various ways, particularly in road and earth constructions, substituting primary resources such as gravel. However, they may also contain pollutants, such as heavy metals, which may be leached to the groundwater. The toxic impacts of these emissions are so far often neglected within Life Cycle Assessments (LCA) of products or waste treatment services and thus, potentially large environmental impacts are currently missed. This study aims at closing this gap by assessing the ecotoxic impacts of heavy metal leaching from industrial mineral wastes in road and earth constructions. The flows of metals such as Sb, As, Pb, Cd, Cr, Cu, Mo, Ni, V and Zn originating from three typical constructions to the environment are quantified, their fate in the environment is assessed and potential ecotoxic effects evaluated. For our reference country, Germany, the industrial wastes that are applied as Granular Secondary Construction Material (GSCM) carry more than 45,000 t of diverse heavy metals per year. Depending on the material quality and construction type applied, up to 150 t of heavy metals may leach to the environment within the first 100 years after construction. Heavy metal retardation in subsoil can potentially reduce the fate to groundwater by up to 100%. One major challenge of integrating leaching from constructions into macro-scale LCA frameworks is the high variability in micro-scale technical and geographical factors, such as material qualities, construction types and soil types. In our work, we consider a broad range of parameter values in the modeling of leaching and fate. This allows distinguishing between the impacts of various road constructions, as well as sites with different soil properties. The findings of this study promote the quantitative consideration of environmental impacts of long-term leaching in Life Cycle Assessment, complementing site-specific risk assessment, for the design of waste management strategies, particularly in the construction sector.     

Acid-catalyzed heterogeneous reaction of 3-methyl-2-buten-1-ol with hydrogen peroxide

Acid-catalyzed heterogeneous oxidation with hydrogen peroxide(H2O2) has been suggested to be a potential pathway for secondary organic aerosol(SOA) formation from isoprene and its oxidation products. However, knowledge of the chemical mechanism and kinetics for this process is still incomplete. 3-Methyl-2-buten-1-ol(MBO321), an aliphatic alcohol structurally similar to isoprene, is emitted by pine forests and widely used in the manufacturing industries. Herein the uptake of MBO321 into H2SO4–H2O2mixed solution was investigated using a flow-tube reactor coupled to a mass spectrometer. The reactive uptake coefficients(γ) were acquired for the first time and were found to increase rapidly with increasing acid concentration. Corresponding aqueous-phase reactions were performed to further study the mechanism of this acid-catalyzed reaction. MBO321 could convert to 2-methyl-3-buten-2-ol(MBO232) and yield isoprene in acidic media. Organic hydroperoxides(ROOHs) were found to be generated through the acid-catalyzed route,which could undergo a rearrangement reaction and result in the formation of acetone and acetaldehyde. Organosulfates, which have been proposed to be SOA tracer compounds in the atmosphere, were also produced during the oxidation process. These results suggest that the heterogeneous acid-catalyzed reaction of MBO321 with H2O2 may contribute to SOA mass under certain atmospheric conditions.     

改造碳黑废水处理设施使废水循环使用

介绍碳黑废水处理工艺流程的技术改造及其技术要点。着重阐述了关键设备斜管沉淀池的运行原理、运行结果及其在整个流程改造过程中所起的作用。改造后的工艺流程特点是斜管沉淀效率高，出水水质好，副产品碳黑质优销路好，劳动强度低，废水可循环使用，设备占地少，运行费用低，总体效益好。改造后实现了全厂生产用水闭路循环，取得了可观的经济、环境、社会效益。废水循环利用在技术上是可行的，经济上有收益，实现了废水及固体废物的资源化。     

中国台风灾害及其影响的研究

中国是世界上受热带气旋影响最严重的国家之一。本文对影响和登陆中国的热带气旋活动的特征、台风灾害特点及其形成规律作了分析，并讨论了台风灾害对中国社会和经济发展的影响。分析结果指出，影响中国的台风灾害具有发生频率高、突发性强、群发性显著、影响范围广、成灾强度大等特点，这类灾害主要由台风带来的狂风、暴雨、风暴潮及其引发的灾害链所造成。台风灾害不仅造成大批人员伤亡，而且对中国各个经济部门都有严重影响，它所     

Formation of secondary inorganic aerosols by power plant emissions exhausted through cooling towers in Saxony

Background, aim, and scope  The fraction of ambient PM₁₀ that is due to the formation of secondary inorganic particulate sulfate and nitrate from the emissions of two large, brown-coal-fired power stations in Saxony (East Germany) is examined. The power stations are equipped with natural-draft cooling towers. The flue gases are directly piped into the cooling towers, thereby receiving an additionally intensified uplift. The exhausted gas-steam mixture contains the gases CO, CO₂, NO, NO₂, and SO₂, the directly emitted primary particles, and additionally, an excess of ‘free’ sulfate ions in water solution, which, after the desulfurization steps, remain non-neutralized by cations. The precursor gases NO₂ and SO₂ are capable of forming nitric and sulfuric acid by several pathways. The acids can be neutralized by ammonia and generate secondary particulate matter by heterogeneous condensation on preexisting particles. Materials and methods  The simulations are performed by a nested and multi-scale application of the online-coupled model system LM-MUSCAT. The Local Model (LM; recently renamed as COSMO) of the German Weather Service performs the meteorological processes, while the Multi-scale Atmospheric Transport Model (MUSCAT) includes the transport, the gas phase chemistry, as well as the aerosol chemistry (thermodynamic ammonium–sulfate–nitrate–water system). The highest horizontal resolution in the inner region of Saxony is 0.7 km. One summer and one winter episode, each realizing 5 weeks of the year 2002, are simulated twice, with the cooling tower emissions switched on and off, respectively. This procedure serves to identify the direct and indirect influences of the single plumes on the formation and distribution of the secondary inorganic aerosols. Results and conclusions  Surface traces of the individual tower plumes can be located and distinguished, especially in the well-mixed boundary layer in daytime. At night, the plumes are decoupled from the surface. In no case does the resulting contribution of the cooling tower emissions to PM₁₀ significantly exceed 15 μgm⁻³ at the surface. These extreme values are obtained in narrow plumes on intensive summer conditions, whereas different situations with lower turbulence (night, winter) remain below this value. About 90% of the PM₁₀ concentrations in the plumes are secondarily formed sulfate, mainly ammonium sulfate, and about 10% originate from the primarily emitted particles. Under the assumptions made, ammonium nitrate plays a rather marginal role. Recommendations and perspectives  The analyzed results depend on the specific emission data of power plants with flue gas emissions piped through the cooling towers. The emitted fraction of ‘free’ sulfate ions remaining in excess after the desulfurization steps plays an important role at the formation of secondary aerosols and therefore has to be measured carefully.     

Leaching from granular cement-based materials during infiltration/wetting coupled with freezing and thawing

Many secondary materials are being considered for use as substitutes for natural aggregates in highway applications due to their suitable engineering and economic properties. During the design life of the application, recycled materials are exposed to freeze/thaw cycles and other aging processes such as carbonation, coupled with intermittent infiltration/wetting by precipitation events. In such scenarios, leaching of material constituents is a primary pathway for environmental impact. This paper presents results of the effect of freezing and thawing on the leaching behavior of major and minor constituents from a laboratory formulated granular cement-based material. Scenarios considered included water percolating through the material (flow-through) and run-off (flow-around), both important leaching pathways in highway environments. The effect of moisture content at the time of freezing, number of freeze/thaw (F/T) cycles, and material size reduction were investigated. F/T exposure and subsequent infiltration/wetting resulted in consolidation and self-cementing of the granular cement-based material. For the flow-around scenario, F/T exposure resulted in a reduction in constituent release with time and increasing F/T cycles. For the flow-through scenario, moisture content at the time of freezing was an important parameter and an increase in the release was initially observed due to preferential flow/cracks and/or constituent redistribution prior to a decrease that resulted from self-cementing during further thawing and percolation.     

A dynamic hydrological Monte Carlo simulation model to inform decision-making at Lake Toolibin,Western Australia

Lake Toolibin, an ephemeral lake in the agricultural zone of Western Australia, is under threat from secondary salinity due to land clearance throughout the catchment. The lake is extensively covered with native vegetation and is a Ramsar listed wetland, being one of the few remaining significant migratory bird habitats in the region. Currently, inflow with salinity greater than 1000 mg/L TDS is diverted from the lake in an effort to protect sensitive lakebed vegetation. However, this conservative threshold compromises the frequency and extent of lake inundation, which is essential for bird breeding. It is speculated that relaxing the threshold to 5000 mg/L may pose negligible additional risk to the condition of lakebed vegetation. To characterise the magnitude of improvement in the provision of bird breeding habitat that might be generated by relaxing the threshold, a dynamic water and salt balance model of the lake was developed and implemented using Monte Carlo simulation. Results from best estimate model inputs indicate that relaxation of the threshold increases the likelihood of satisfying habitat requirements by a factor of 9.7. A second-order Monte Carlo analysis incorporating incertitude generated plausible bounds of [2.6, 37.5] around the best estimate for the relative likelihood of satisfying habitat requirements. Parameter-specific sensitivity analyses suggest the availability of habitat is most sensitive to pan evaporation, lower than expected inflow volume, and higher than expected inflow salt concentration. The characterisation of uncertainty associated with environmental variation and incertitude allows managers to make informed risk-weighted decisions.     

Analysis of Damaging Hydrogeological Events: The Case of the Calabria Region (Southern Italy)

A period of bad weather conditions due to prolonged intense rainfall and strong winds can trigger landslides, floods, secondary floods (accumulation of rain on surfaces with low permeability), and sea storms, causing damage to humans and infrastructure. As a whole, these periods of bad weather and triggered phenomena can be defined as damaging hydrogeological events (DHEs). We define a methodological approach based on seven simple indexes to analyze such events. The indexes describe the return period (T) and trend of rainfall, the extent of hit areas, and the level of damages; they can be considered attributes of georeferenced features and analyzed with GIS techniques. We tested our method in an Italian region frequently hit by DHEs. In a period of 10 years, 747 damaging phenomena (landslides, 43%; floods, 38%) and 94 DHEs have been classified. The road network and housing areas are the most frequently damaged elements, threatened by all types of damaging phenomena. T classes are almost in accordance with the level of damage. These results can be used to outline warning levels for civil protection purposes, to forecast the areas most likely to be hit and the potential ensuing damage, to disseminate information concerning vulnerable areas, and to increase people’s awareness of risk.