Polychlorinated biphenyls in surface sediments of Yueqing Bay, Xiangshan Bay, and Sanmen Bay in East China Sea

The spatial distribution and source of polychlorinated biphenyls (PCBs) in 30 surface sediments of Yueqing Bay, Xiangshan Bay, and Sanmen Bay in Eastern China were analysed. Total concentrations of PCBs ranged from 9.33 to 19.60 ng g⁻¹ dry weight for all the sampling stations. The observed PCB levels were lower than those in areas of high urbanisation or contamination in the bay. Low-chlorinated PCBs, dominated by tri-PCB, were identified as the prevalent contaminate of surface sediments, and the top three PCB congeners were lighter chlorinated congeners (PCB 8, PCB 18 and PCB 28). These results were in agreement with the fact that tri-PCB compounds are the dominant contaminants in China. The result of the principal component analysis revealed that all samples were similar in composition to Aroclor 1242, suggesting they might originate from electrical capacitors and transformers. The levels of PCBs were significantly correlated with the total organic carbon in the sediments.     

Limitations of reverse polyethylene samplers (RePES) for evaluating toxicity of field contaminated sediments

Passive samplers are used to measure dissolved nonionic organic contaminants (NOCs) in environmental media. More recently, reverse polyethylene samplers (RePES) have been used with spiked sediments to recreate interstitial water exposure concentrations and observed toxicity. In the present study, RePES were used with field contaminated sediments. The RePES was not capable of recreating the pattern of toxicity with the amphipod and mysid observed with intact field sediments. Decreased survival in the RePES exposures as compared to the whole sediment exposures was most likely caused by an overexposure to NOCs due to a lack of surrogate black carbon in the RePES system. As an alternative, aqueous phase studies were performed in which polyethylene was allowed to equilibrate with slurries of intact sediments for 3 weeks. Three weeks was found to be an insufficient amount of time for the polyethylene to equilibrate with the sediment. An additional study demonstrated 3 months was sufficient for lower contaminant concentrations, but might not be an adequate amount of time for more highly contaminated sediments. The aqueous phase transfer approach may be useful if equilibration is sufficiently long, although this length of time may be impractical for use in certain applications, such as toxicity identification evaluations (TIEs).     

Persistent organic pollutants associated to water fluxes and sedimentary processes in the Colorado River delta, Baja California, México

Polychlorinated biphenyls (PCBs) and organochlorine pesticides (OCPs) were studied in sediment cores from two distinctive modern channels of the Colorado River (CR) delta. Their abundance and temporal changes are associated with flood-flows from the CR across the USA-Mexico border. The CR channel is directly exposed to river flood-flows while the Hardy River (HR) is a local channel derived mainly from agricultural runoff, geothermal effluents, and treated urban wastewater. Different headwater compositions and degrees of exposure to flood-flows appear to be the factors controlling the composition of persistent organic pollutants (POPs). Enrichment of OCPs (46 ng g⁻¹ dwt in HR and 4.37 ng g⁻¹ dwt in CR) occurred during or a few years after flooding. PCB-138 (4.2 ng g⁻¹ dwt) is enriched in HR suggesting its origin in dielectric oils from the geothermal power plant. PCB-28 (2.1 ng g⁻¹ dwt) in CR may be related with atmospheric input and/or re-deposition of upstream sediments. In surficial sediments (0-3 cm), only HR exceeds international sediment quality guidelines (4,4′-DDE = 8.16 ng g⁻¹ dwt and ΣDDT = 8.34 ng g⁻¹ dwt).     

Pharmaceuticals in settleable particulate material in urban and non-urban waters

Wastewater treatment plants (WWTP) are important sources of settleable particulate material (SPM), heading to sediments with natural suspended solids. To date, there is little information about the fate of pharmaceuticals in sediment systems. In this study, the objective was to determine if pharmaceuticals are detected in SPM at locations near WWTPs or even in rural areas, thus being susceptible for sedimentation.SPM samples were collected from 10 sites in Finland, grouped as reference, rural and wastewater effluent sites. SPM collectors were placed about 35 cm above bottom for about 2 months during summer. After extraction, a set of 17 pharmaceuticals was analyzed.Several pharmaceuticals were detected in SPM accumulated at sites next to WWTPs. The concentration of citalopram was notably high (300-1350 ng g⁻¹ dw). Also bisoprolol and ciprofloxacin were detected at high concentrations (6-325 and 9-390 ng g⁻¹ dw, respectively). In contrast, none of the pharmaceuticals were detected from reference sites and only two were found from a single rural site.There is no previous information about the presence of pharmaceuticals in SPM. The results showed that pharmaceuticals are sorbed to particles in WWTP and nearby, eventually ending up in sediments. These results also indicate that pharmaceuticals are not markedly contaminating sediments of rural areas in Finland.     

Guidelines for copper in sediments with varying properties

A major weakness of sediment quality guidelines (SQGs) is their poor ability to predict how toxicity thresholds change for different sediment types. Using species sensitivity distributions (SSDs) of copper effects data, new guidelines were derived for copper in non-sulfidic marine sediments in which organic carbon (OC) and particle size strongly influence copper bioavailability. The derived SQGs varied in a predictable manner with changes in sediment particle size and organic carbon (OC), and were shown to offer a significant improvement on the existing ‘single value’ SQG. Adequate protection for all benthic organisms is expected to be achieved for a OC-normalised copper concentration of 3.5 mg Cu g⁻¹ OC in the <63 μm sediment fraction. For short-term exposures, the equivalent acute guideline is 11 mg < 63 μm Cu g⁻¹ OC. The new SQGs incorporate a high degree of conservatism owing to the use of copper-spiked sediments and laboratory-based bioassays that were expected to result in greater metal exposure of organisms to bioavailable copper than would be expected for field-contaminated sediments with similar total copper concentrations. SQGs that vary with sediment properties were prepared in an easily referenced tabular format.     

Sediment quality guidelines for copper and zinc for filter-feeding estuarine oysters?

Sediment quality guidelines (SQGs) assess the ability of bottom sediment to sustain healthy infauna and water quality guidelines (WQGs) provide protection for a designated percentage of aquatic species. Filter-feeding marine species, e.g. oysters and mussels, acquire food from particles in the water column and protection of these animals is not provided by SQGs or WQGs. The current work investigated the relationship between metal (Cu, Zn) concentrations in total and fine-fraction (<62.5 μm) surficial sediment digested in a range of acids and chelating agents and oyster tissue metal concentrations. A strong correlation between oyster tissue Cu and Zn concentrations and fine-fraction surficial sediment digested in 1 M HCl provided a sedimentary guideline which predicted tissue metal concentrations in oysters and established a level (<45 μg g⁻¹ and <1000 μg g⁻¹, respectively) for protecting oysters from exceeding human consumption levels (70 μg g⁻¹ and 1000 μg g⁻¹, respectively).     

Inputs of antifouling paint-derived dichlorodiphenyltrichloroethanes (DDTs) to a typical mariculture zone (South China): potential impact on aquafarming environment

Existing evidence indicated that dichlorodiphenyltrichloroethane (DDT)-containing antifouling paints were an important source of DDT residues to mariculture zones. However, the magnitude of the impact on aquafarming environment has remained largely unknown. In the present study, the concentrations of DDT and its metabolites (designated as DDXs) were determined in harbor sediment and antifouling paint samples collected from a typical mariculture zone in South China. Compositional and concentration correlation analyses implicated the DDT-containing antifouling paints for fishing boat maintenance as an important source of DDT in the mariculture zone. The annual emission of DDXs to the study region was estimated at 0.58 tons/yr. Furthermore, a comparison of the expected DDT loadings in pelagic fish and field measurements indicated that fish feed especially trash fish was a major source of DDTs in the fish body. Nevertheless, the use of DDT-containing antifouling paints should be limited to prevent further deterioration in aquafarming environment.     

Accumulations of total metal in dominant shrimp species (Palaemon adspersus, Palaemon serratus, Parapenaeus longirostris) and bottom surface sediments obtained from the Northern Inner Shelf of the Sea of Marmara

The aim of this study is to determine the total metal (aluminum, copper, manganese, nickel, lead, zinc, cadmium, iron, mercury) contents of dominant shrimp species and sediments present at 1–50 m depths of the Northern Inner Shelf of the Sea of Marmara. Shrimp and sediment samples were collected from four regions (Büyükçekmece, Silivri, Tekirda?, ?arköy) and from different depths (1, 5, 10, 20, 30, 50 m) at each region in September and November of 2003. Three shrimp species [Palaemon adspersus (Rathke, 1937), Palaemon serratus (Pennant, 1777), Parapenaeus longirostris (H. Lucas, 1846)] were identified to be dominant as a result of the examination on the obtained samples. Heavy metal contents of these three species were determined and the results were compared with the acceptable treshold values of the Seafood Standards and also with available literatures. The Cu contents were found to be higher than the treshold limits in all samples except P. longirostris from Silivri, also the Cd contents in all samples except P. adspersus from Büyükçekmece, the Zn contents only in P. adspersus and P. longirostris from Tekirda?, and the Pb contents in all species from all regions. These high values are the indicator of industrial pollution. There is not any data in the Seafood Standards about Mn, Ni, Fe and Al contents in shrimp species. The values of these metal contents were given in the present study. The examination of total metal distributions in bottom surface sediment samples in the Northern Inner Shelf of the Sea of Marmara showed that the determined values were higher than the shale average at some depths of examined stations.     

Distribution and sources of polycyclic aromatic hydrocarbons in Wuhan section of the Yangtze River, China

Polycyclic aromatic hydrocarbons (PAHs) are important organic contaminants with great significance for China, where coal burning is the main source of energy. In this study, concentrations, distribution between different phases, possible sources and eco-toxicological effect of PAHs of the Yangtze River were assessed. PAHs in water, suspended particulate matters (SPM) and sediment samples at seven main river sites, 23 tributary and lake sites of the Yangtze River at the Wuhan section were analyzed. The total concentrations of PAHs in the studied area ranged from 0.242 to 6.235 μg/l in waters and from 31 to 4,812 μg/kg in sediment. The average concentration of PAHs in SPM was 4,677 μg/kg, higher than that in sediment. Benzo(a)pyrene was detected only at two stations, but the concentrations were above drinking water standard. The PAHs level of the Yangtze River was similar to that of some other rivers in China but higher than some rivers in foreign countries. There existed a positive relationship between PAHs concentrations and the TOC contents in sediment. The ratio of specific PAHs indicated that PAHs mainly came from combustion process, such as coal and wood burning. PAHs may cause potential toxic effect but will not cause acute biological effects in sedimentary environment of the Wuhan section of the Yangtze River.     

Speciation of Trace Metals in Coastal Sediments of El-Mex Bay South Mediterranean Sea–West of Alexandria (Egypt)

Sediments of El-Mex Bay estuary on the southern Mediterranean Sea have been analyzed for trace metals after sediment fractionation by sequential leaching. A sequential extraction procedure was applied to identify forms of Mn, Cu, Cd, Cr, Zn and Fe. The five steps of the sequential extraction procedure partitioned metals into: CH₃COONH₄ extractable (F1); NaOAC carbonate extractable (F2); NH₂OH.HCl/CH₃COOH reducible extractable (F3); H₂O₂–HNO₃ organic extractable (F4) and NHO₃/HClO₄/HF acid soluble residue (F5). Extracted concentrations of trace metals analyzed after all five steps, were found to be (μg/g) for Mn: 1930.2, Cu: 165.3, Cd: 60.9, Cr: 386.3, Zn: 2351.3 and Fe: 10895. Most of elements were found in reducible fraction except Fe found in acid soluble residue, characterizing stable compounds in sediments. Labile (non-residual) fractions of trace elements (sum of the first four fractions) were analyzed because they are more bioavailable than the residual amount. Correlation analysis was used to understand and visualize the associations between the labile fractions of trace metals and certain forms, since Fe-and Mn-oxides play an important role in trace metals sorption within aquatic systems, especially within El-Mex Bay sediments that characterized by varying metal bioavailability.