Comparing growth development of <Emphasis Type="Italic">Myriophyllum</Emphasis> spp. in laboratory and field experiments for ecotoxicological testing

BACKGROUND, GOALS AND SCOPE: Risk assessment of herbicides and the evaluation of contaminated sediments based on algae and the macrophyte Lemna sp. alone may underestimate the potential hazard of certain compounds. Therefore, various test systems with Myriophyllum spp. have been developed recently to assess the phytotoxicity in surface waters and natural sediments. In the present study, experiments investigating the growth development of Myriophyllum spp. were performed in the laboratory under defined conditions and in mesocosms under environmentally realistic exposure conditions to evaluate the suitability of these species as potential standard test organisms in ecotoxicological testing. This study provides data on the endpoints biomass, plant length and root development. MATERIALS AND METHODS: Six independent experiments were performed to investigate the plant development of Myriophyllum spp. under control conditions. The main difference in the experiments was the complexity of the test systems ranging from simple laboratory experiments to complex outdoor mesocosm studies. At the start of each experiment, uniform cuttings of Myriophyllum spp. were placed in vessels with or without sediments to reduce variability between replicates. The endpoints considered in this investigation were biomass (fresh weight of the whole plant), length of the main shoot, length of the side shoots, total length of the plant (calculated from the length of the main and side shoots) and root formation. Root to shoot ratios were calculated as a further measure for plant development. Relative growth rates (RGR) based on plant length (RG(L)R) and on biomass (RG(B)R) were calculated. RESULTS: Despite the various experimental conditions, comparable growth was obtained in all test systems and the variability of endpoints, such as total length and biomass of plants, was low. It was observed that the RGR of M. spicatum in the simple laboratory test system with sediment were comparable to growth data obtained for M. verticillatum and M. spicatum grown in indoor and outdoor mesocosms, thus indicating that Myriophyllum growth tends to increase by the addition of sediment. High variability was determined for the endpoints length of the side shoots, total root length and biomass of roots. DISCUSSION: One challenge for a test design to investigate phytotoxicity on aquatic plants is to obtain good growth of the plants. From the results, it can be concluded that the experimental conditions in the various test systems were suitable to study the plant development of Myriophyllum spp. because obtained growth rates were comparable between laboratory and field investigations. Another challenge for developing a plant biotest system is the definition of sensitive endpoints. Low variability is preferred to detect minor effects of chemicals or polluted sediments on plant development. In our studies, the variability of the endpoints biomass and total length of plant was low and, therefore, they have much potential as endpoints for assessing toxicity. CONCLUSIONS: The methodologies presented in this study have applications within the risk assessment for aquatic plants and have the advantage of assessing effects taking into account the relevant exposure pathways via water and/or sediment for compounds under investigation. RECOMMENDATIONS AND PERSPECTIVES: Setting safe quality criteria for surface water and sediments is one of the challenges authorities are facing today. Myriophyllum spp. is recommended as suitable test species to investigate phytotoxicity in surface water and sediments. These results, thus, might serve as a basis for the compilation of a new harmonised guideline for ecotoxicological testing with aquatic macrophytes.     

Kinetics of phenanthrene desorption from activated carbons to water

We determined the kinetics of phenanthrene desorption from three activated carbons to water using Tenax beads as an infinite sink for organic compounds in water. Desorption kinetic data very well fitted a biphasic kinetic model based on the presence of two different adsorption sites, viz. low-energy sites and high-energy sites. Rate constants for desorption to water from these two types of sites in the three activated carbons did not reveal a relation with activated carbon grain size. These rate constants were comparable to those for desorption of various organic compounds from hard carbon in various sediments.     

Sediment Quality Assessment in the Gulf of Gdańsk (Baltic Sea) Using Complementary Lines of Evidence

Sediments from Polish coastal environments were classified by a quality assessment approach that took into account trace metal and organic micropollutant concentrations, grain-size distribution, and organic carbon content. Generally, no benthic organisms were found at sites where sediments were classified as heavily polluted. However, areas characterized by a moderate contamination showed a variable composition of the benthic community and changing bioaccumulation patterns; therefore, no single species found in the Gulf of Gdańsk could be considered representative of the whole benthic environment. Although sediment monitoring must be considered a suitable tool to detect hot-spot pollution areas in coastal and inland waters, it should be complemented by bioaccumulation measurements to evaluate the actual risk posed by contaminants to benthic organisms. This “biological information” allows a better appreciation of the real benthic infaunal community exposure to chemicals and can usefully complement the existing sediment quality guidelines.     

Polycyclic aromatic hydrocarbons and their hydroxylated metabolites in fish bile and sediments from coastal waters of Colombia

Sediments and fish bile collected from the Atlantic coastal waters of Colombia were analyzed for 16 parent polycyclic aromatic hydrocarbons (PAHs), and 23 hydroxylated PAHs (OH-PAHs), respectively. Sediments contained overall mean SigmaPAH concentrations of 2090, 234 and 170 ng/g, dry wt, for Cartagena Bay, Caimanera Marsh, and Totumo Marsh, respectively. The mean concentration of the summed OH-PAHs in fish bile was 1250, 180 and 64.1 ng/g bile wt for Cartagena Bay, Caimanera Marsh, and Totumo Marsh, respectively. The results suggest that Cartagena Bay is heavily polluted by PAHs, and that exposure to high concentrations of PAHs together with other factors could contribute to the decreased health of fish living in this ecosystem. This is one of the first studies to describe the analysis of 23 individual OH-PAHs in fish bile, using authentic standards.     

Effects of sediment composition on inorganic mercury partitioning, speciation and bioavailability in oxic surficial sediments

Artificially prepared sediments were used to assess the effects of sediment composition on inorganic Hg partitioning, speciation and bioavailability. Organic coating in sediment greatly increased the Hg partitioning and the amount of bioavailable Hg bound with the clay and the Fe and Mn oxides, but had little effect on that bound with the quartz and calcium carbonate as a result of weaker binding of humic acids and fulvic acids. The clay content increased the concentration of Hg in the sediments but inhibited the gut juice extraction due to the strong binding of Hg-organic matter (OM) complexes. Most Hg in the sediments was complexed by OM (mainly distributed in the organo-complexed phase and the strongly complexed phase), and the Hg-OM complexes (especially Hg in the strongly complexed phase) in sediments contributed much to gut juice extraction. Redistribution of Hg-OM complexes between sediments and gut juices may occur during gut juice extraction and modify Hg bioavailability and speciation in sediments.     

The dispersal and storage of sediment-associated metals in an arid river system: the Leichhardt River, Mount Isa, Queensland, Australia

This paper details the distribution of Cu, Pb and Zn in aquatic systems draining Mount Isa Ag-Cu-Pb-Zn Mine in arid northern Queensland, Australia. Sediment-metal concentrations in the <2mm grain-size fraction adjacent to and downstream of the mine significantly exceed background concentrations (Cu, 159; Pb, 36; Zn, 86 ppm) as well as Australian government sediment quality low trigger guidelines (Cu, 65; Pb, 50; Zn, 200 ppm). Overbank sediments are more contaminated than channel sediments with mean values of Cu, 480; Pb, 540; Zn, 750 ppm. Mean concentrations in cut riverbank samples from the <2mm fraction were Cu, 195; Pb, 724; Zn, 807 ppm. Corresponding <180 microm samples returned concentrations of Cu, 321; Pb, 995; Zn, 1110 ppm. Delivery of contaminants during wet seasons from Mount Isa Mine and historically contaminated riverbanks remains an ongoing issue. The ease of dust entrainment in arid zones means that sediments enriched in toxic concentrations of metals may be widely dispersed and ultimately ingested and absorbed by biota.     

Content, distribution and fate of 33 elements in sediments of rivers receiving wastewater in Hanoi, Vietnam

Untreated industrial and domestic wastewater from Hanoi city is discharged into rivers that supply water for various agricultural and aqua-cultural food production systems. The aim of this study was to assess the content, distribution and fate of 33 elements in the sediment and pore water of the main wastewater receiving rivers. The sediment was polluted with potentially toxic elements (PTEs) with maximum concentrations of 73 As, 427 Cd, 281 Cr, 240 Cu, 218 Ni, 363 Pb, 12.5 Sb and 1240 Zn mg kg(-1) d.w. Observed distribution coefficients (log(10) K(d,obs)) were calculated as the ratio between sediment (mg kg(-1) d.w.) and pore water (mg L(-1)) concentrations. Maxima log(10) K(d,obs) were >4.26 Cd, >6.60 Cu, 4.78 Ni, 7.01 Pb and 6.62 Zn. The high values show a strong PTE retention and indicate the importance of both sorption and precipitation as retention mechanisms. Sulphide precipitation was a likely mechanism due to highly reduced conditions.     

Reconciling models and measurements to assess trends in atmospheric mercury deposition

Changes in atmospheric mercury deposition are used to evaluate the effectiveness of regulations controlling emissions. This analysis can be complicated by seemingly incongruent data from different model runs, model types, and field measurements. Here we present a case study example that describes how to identify trends in regional scale mercury deposition using best-available information from multiple data sources. To do this, we use data from three atmospheric chemistry models (CMAQ, GEOS-Chem, HYSPLIT) and multiple sediment archives (ombrotrophic bog, headwater lake, coastal salt marsh) from the Bay of Fundy region in Canada. Combined sediment and modeling data indicate that deposition attributable to US and Canadian emissions has declined in recent years, thereby increasing the relative significance of global sources. We estimate that anthropogenic emissions in the US and Canada account for 28-33% of contemporary atmospheric deposition in this region, with the rest from natural (14-32%) and global sources (41-53%).     

Occurrence and possible sources of polychlorinated biphenyls in surface sediments from the Wuhan reach of the Yangtze River, China

Twenty-seven surface sediment samples were collected from the mainstream and eight tributaries of the Wuhan reach of the Yangtze River, China, in 2005, in order to assess the distribution, possible sources, and potential risk of polychlorinated biphenyls (PCBs) in the environment. The total concentrations of PCBs (the sum of 39 congeners) ranged from 1.2 to 45.1 ng g⁻¹ dry weight, with a mean value of 9.2 ng g⁻¹. Sediment samples with the highest PCB concentrations came from the tributary sites, which are closer to PCB sources. Conversely, PCB concentrations in the sediment from the mainstream sites of Yangtze River were relatively low. The observed PCB levels were higher than those found in the sediments of other rivers in China, but lower than those in river sediments from other urban areas and harbors around the world. Low-chlorinated PCBs, dominated by tetra-PCBs and penta-PCBs, were identified as being prevalent in the surface sediments. Correlation analyses between the PCBs and the geochemistry and heavy metal content of the sediments suggest that the washing of these compounds from the land into the river by floods and heavy rains, or industrial wastewater and domestic sewage, may be the major sources of the PCBs. According to established sediment quality guidelines, the risk of adverse biological effects from the levels of PCBs recorded at most of the studied sites should be insignificant, although the higher concentrations at other sites could cause acute biological damage.