A device for sampling the mud‐water interface in eutrophic lakes and bogs for residue analysis

Abstract

A tubular device has been developed making it possible to obtain layered samples of loosely aggregated, flocculent material from bogs or eutrophic lakes. The samples are up to 50 cm long and 15 cm in diameter. The sampler is free from protuberances and intact, layered samples can be taken. The tubular part of the sampler is about 85 em long, the walls of the lower 25‐cm portion harbouring a pneumatic closing mechanism which is controlled from above the water surface. An extendible handle for manipulating the sampler and for guiding it into place, is fastened to the upper end of the sampling tube. The performance and the operation of the sampler in the field are described.     

Transport of Sewage Sludge in a Mixed Water Column

Abstract

Sewage sludge from four publicly-owned treatment works was sampled and characterized in terms of parameters affecting transport at the 106-mile deep ocean disposal site as part of the US Environmental Protection Agency's site monitoring programme. Samples from treatment plants in Passaic Valley, Rahway, and Elizabeth, New Jersey and New York City were characterized in terms of dynamic size distribution, suspended solids and density. the transport characteristics of sludge particles were measured using a 2 metre computer-interfaced laboratory settling column. Experiments were conducted at constant salinity (35 ppt) while varying hydrodynamic mixing, sludge type and concentration using a modified factorial experimental design. Hydrodynamic power dissipation was varied so that the vertical dispersion and rms fluid shear rate ranged between 0-6 cm²S^?1 and 0-30s^?1 respectively. Results indicate that at least 80% of suspended sludge particles will eventually settle under mixed conditions. the average settling velocities ranged between 0.05-4.05 × 10^-3 cm ^s-1. Shear rates above 15 s^?1 inhibited sludge settling due to aggregate breakup and boundary effects, but at a lower shear rate, differential settling and fluid shear were the dominant transport mechanisms. Sludge dilution (1/500-1/5000) had a limited effect on the settling rate. Results from this study can be used to calibrate particle transport models to determine the fate of sludge disposed at an ocean disposal site.     

Sustainable options of post treatment of UASB effluent treating sewage: A review

The upflow anaerobic sludge blanket (UASB) process is reported to be a sustainable technology for domestic wastewaters treatment in developing countries and for small communities. However, the inability of UASB process to meet the desired disposal standards has given enough impetus for subsequent post treatment. In order to upgrade the UASB based sewage treatment plants (STPs) to achieve desired effluent quality for disposal or for reuse, various technological options are available and broadly differentiated as primary post-treatment for the removal of organic and inorganic compounds and suspended matter; secondary post-treatment for the removal of hardly degradable soluble matter, colloidal and nutrients; and polishing systems for removals of pathogens. Hence, this paper discusses the different systems for the treatment of UASB reactor effluent treating sewage. Additionally, a comparative review, an economic evaluation of some of the emerging options was conducted and based on the extensive review of different integrated combination, i.e. UASB-different aerobic systems, a treatment concept based on natural biological mineralization route recognized as an advanced technology to meet all practical aspects to make it a sustainable for environmental protection, resource preservation and recovering maximum resources.     

加速溶剂萃取-在线净化-液相色谱串联质谱法检测污泥堆肥样品中三氯生和三氯卡班

污泥堆肥样品基质复杂,其中三氯生（TCS）和三氯卡班（TCC）的提取和净化过程操作烦琐、回收率低。通过对净化条件进行优化,建立了加速溶剂萃取-在线净化-液相色谱串联质谱法检测污泥堆肥样品中TCS和TCC的分析方法,并对上海某污水厂实际污泥堆肥样品中的TCS和TCC进行定量分析。结果表明,TCS和TCC的检出限分别为0.003和0.0002μg/g,加标回收率为90.3%~99.8%,相对标准偏差（RSD）为1.2%~8.5%（n=6）。该方法样品前处理时间短、回收率高、试剂使用量少,能够满足实际污泥堆肥样品中TCS和TCC的检测要求。     

Use of thermal analysis techniques (TG-DSC) for the characterization of diverse organic municipal waste streams to predict biological stability prior to land application

The use of organic municipal wastes as soil amendments is an increasing practice that can divert significant amounts of waste from landfill, and provides a potential source of nutrients and organic matter to ameliorate degraded soils. Due to the high heterogeneity of organic municipal waste streams, it is difficult to rapidly and cost-effectively establish their suitability as soil amendments using a single method. Thermal analysis has been proposed as an evolving technique to assess the stability and composition of the organic matter present in these wastes. In this study, three different organic municipal waste streams (i.e., a municipal waste compost (MC), a composted sewage sludge (CS) and a thermally dried sewage sludge (TS)) were characterized using conventional and thermal methods. The conventional methods used to test organic matter stability included laboratory incubation with measurement of respired C, and spectroscopic methods to characterize chemical composition. Carbon mineralization was measured during a 90-day incubation, and samples before and after incubation were analyzed by chemical (elemental analysis) and spectroscopic (infrared and nuclear magnetic resonance) methods. Results were compared with those obtained by thermogravimetry (TG) and differential scanning calorimetry (DSC) techniques. Total amounts of CO₂ respired indicated that the organic matter in the TS was the least stable, while that in the CS was the most stable. This was confirmed by changes detected with the spectroscopic methods in the composition of the organic wastes due to C mineralization. Differences were especially pronounced for TS, which showed a remarkable loss of aliphatic and proteinaceous compounds during the incubation process. TG, and especially DSC analysis, clearly reflected these differences between the three organic wastes before and after the incubation. Furthermore, the calculated energy density, which represents the energy available per unit of organic matter, showed a strong correlation with cumulative respiration. Results obtained support the hypothesis of a potential link between the thermal and biological stability of the studied organic materials, and consequently the ability of thermal analysis to characterize the maturity of municipal organic wastes and composts.     

Gasification of dried sewage sludge: status of the demonstration and the pilot plant

The disposal of sewage sludge from municipal waste water treatment plants is suffering from raising costs.The gasification is an alternative way of treatment, which can reduce the amount of solid residues that must be disposed from a water treatment plant. The produced gas can be used very flexible to produce electrical energy, to burn it very cleanly or to use it for upgrading.The gasification in the fluidised bed and the gas cleaning with the granular bed filter has shown successful operation. A demonstration plant in Balingen was set up in 2002 and rebuilt to a larger throughput in 2010. As a next step a demonstration plant was built in Mannheim and is now at the end of the commissioning phase. Nowadays the product gas is blended with biogas from sludge fermentation and utilized in a gas engine or combustion chamber to produce heat. In the future the process control for a maximized efficiency and the removal of organic and inorganic impurities in the gas will be further improved.     

Recycling and recovery routes for incinerated sewage sludge ash (ISSA): A review

The drivers for increasing incineration of sewage sludge and the characteristics of the resulting incinerated sewage sludge ash (ISSA) are reviewed. It is estimated that approximately 1.7 million tonnes of ISSA are produced annually world-wide and is likely to increase in the future. Although most ISSA is currently landfilled, various options have been investigated that allow recycling and beneficial resource recovery. These include the use of ISSA as a substitute for clay in sintered bricks, tiles and pavers, and as a raw material for the manufacture of lightweight aggregate. ISSA has also been used to form high density glass–ceramics. Significant research has investigated the potential use of ISSA in blended cements for use in mortars and concrete, and as a raw material for the production of Portland cement. However, all these applications represent a loss of the valuable phosphate content in ISSA, which is typically comparable to that of a low grade phosphate ore. ISSA has significant potential to be used as a secondary source of phosphate for the production of fertilisers and phosphoric acid. Resource efficient approaches to recycling will increasingly require phosphate recovery from ISSA, with the remaining residual fraction also considered a useful material, and therefore further research is required in this area.     

BMP tests of source selected OFMSW to evaluate anaerobic codigestion with sewage sludge

The aim of this study is to characterize different types of source selected organic fraction of municipal solid waste (SS-OFMSW) in order to optimize the upgrade of a sewage sludge anaerobic digestion unit by codigestion. Various SS-OFMSW samples were collected from canteens, supermarkets, restaurants, households, fruit–vegetable markets and bakery shops. The substrates characterization was carried out getting traditional chemical–physical parameters, performing elemental analysis and measuring fundamental anaerobic digestion macromolecular compounds such as carbohydrates, proteins, lipids and volatile fatty acids. Biochemical methane potential (BMP) tests were conducted at mesophilic temperature both on single substrates and in codigestion regime with different substrates mixing ratios. The maximum methane yield was observed for restaurant (675 NmlCH₄/gVS) and canteens organic wastes (571 and 645 NmlCH₄/gVS). The best codigestion BMP test has highlighted an increase of 47% in methane production respect sewage sludge digestion.     

济钢高炉煤气净化回收与综合利用

就河南济源钢铁公司高炉煤气净化系统现状、存在的问题以及改进措施作了详细介绍,净化后的高炉煤气加以综合利用,给济钢带来了巨大的经济效益和环境效益。同时指出高炉煤气净化利用是钢铁企业节能降耗,降低生产成本的有效途径之一。     

电子束照射法脱硫脱氮技术工艺

在阐明电子束照射法脱硫脱氮技术的机理、流程、特点的基础上 ,探讨了该工艺在应用过程中存在的主要经济、技术问题。