Life cycle assessment of waste paper management: The importance of technology data and system boundaries in assessing recycling and incineration

The significance of technical data, as well as the significance of system boundary choices, when modelling the environmental impact from recycling and incineration of waste paper has been studied by a life cycle assessment focusing on global warming potentials. The consequence of choosing a specific set of data for the reprocessing technology, the virgin paper manufacturing technology and the incineration technology, as well as the importance of the recycling rate was studied. Furthermore, the system was expanded to include forestry and to include fossil fuel energy substitution from saved biomass, in order to study the importance of the system boundary choices. For recycling, the choice of virgin paper manufacturing data is most important, but the results show that also the impacts from the reprocessing technologies fluctuate greatly. For the overall results the choice of the technology data is of importance when comparing recycling including virgin paper substitution with incineration including energy substitution. Combining an environmentally high or low performing recycling technology with an environmentally high or low performing incineration technology can give quite different results. The modelling showed that recycling of paper, from a life cycle point of view, is environmentally equal or better than incineration with energy recovery only when the recycling technology is at a high environmental performance level. However, the modelling also showed that expanding the system to include substitution of fossil fuel energy by production of energy from the saved biomass associated with recycling will give a completely different result. In this case recycling is always more beneficial than incineration, thus increased recycling is desirable. Expanding the system to include forestry was shown to have a minor effect on the results. As assessments are often performed with a set choice of data and a set recycling rate, it is questionable how useful the results from this kind of LCA are for a policy maker. The high significance of the system boundary choices stresses the importance of scientific discussion on how to best address system analysis of recycling, for paper and other recyclable materials.     

Global warming and environmental production efficiency ranking of the Kyoto Protocol nations

This paper analyzes the United Nations Organization's Kyoto Protocol nations to address two questions. First, what are the environmental production efficiency rankings of these nations? Second, is there a relationship between a nation's ratification status and its environmental production efficiency ranking? Our findings suggest that the nations that have ratified the Kyoto Protocol are more likely to be environmentally production efficient as compared to the nations that have not ratified the Protocol.     

Experimental investigations on regeneration energy and energy management strategy in series hydraulic/electric synergy system

This research work draws an insight into the experimental investigations on a series hydraulic/electric synergy system—a green transportation system. An experimental test rig of the system with all necessary sensors and instrumentation has been developed to study the energy saving through hydraulic regenerative braking. The effect of various system parameters, such as braking time, maximum accumulator pressure, pre-charge pressure of hydro-pneumatic accumulator, volumetric displacement of the hydraulic master pump, and hydraulic regeneration pump on the quantum of regeneration energy, was analyzed. In addition, an AMESim model of the real-time experimental test rig has been developed and validated with experimental results. A set of five different experimental designs (parameter variations) of the system is defined with the available standard component sizes. The best design is selected of the available experimental designs based on the maximum hydraulic regeneration energy and regeneration efficiency. It was observed that the selected design has an energy efficiency of 13.3% and a regeneration efficiency of 43.8%. An accumulator-centric control strategy for energy management is developed and implemented on the experimental test rig configured with the selected design. The effectiveness of the control strategy is tested through experiments and simulation on the developed test rig.     

Human Impacts to River Temperature and Their Effects on Biological Processes: A Quantitative Synthesis1

Hester, Erich T. and Martin W. Doyle, 2011. Human Impacts to River Temperature and Their Effects on Biological Processes: A Quantitative Synthesis. Journal of the American Water Resources Association (JAWRA) 47(3):571‐587. DOI: 10.1111/j.1752‐1688.2011.00525.x Abstract: Land‐use change and water resources management increasingly impact stream and river temperatures and therefore aquatic organisms. Efforts at thermal mitigation are expected to grow in future decades. Yet the biological consequences of both human thermal impacts and proposed mitigation options are poorly quantified. This study provides such context for river thermal management in two ways. First, we summarize the full spectrum of human thermal impacts to help thermal managers consider the relative magnitudes of all impacts and mitigation options. Second, we synthesize biological sensitivity to river temperature shifts using thermal performance curves, which relate organism‐level biological processes to temperature. This approach supplements the popular use of thermal thresholds by directly estimating the impact of temperature shifts on the rates of key biological processes (e.g., growth). Our results quantify a diverse array of human thermal impacts, revealing that human actions tend to increase more than decrease river temperatures. Our results also provide a practical framework in which to quantify the sensitivity of river organisms to such impacts and related mitigation options. Finally, among the data and studies we synthesized, river organisms appear to be more sensitive to temperature above than below their thermal maxima, and fish are more sensitive to temperature change than invertebrates.     

A multidecadal oscillation in precipitation and temperature series is pronounced in low flow series from Puget Sound streams

In Pacific Northwest streams, summer low flows limit water available to competing instream (salmon) and out-of-stream (human) uses, creating broad interest in how and why low flows are trending. Analyses that assumed linear (monotonic) change over the last ~60 years revealed declining low flow trends in minimally disturbed streams. Here, polynomials were used to model flow trends between 1929 and 2015. A multidecadal oscillation was observed in flows, which increased initially from the 1930s until the 1950s, declined until the 1990s, and then increased again. A similar oscillation was detected in precipitation series, and opposing oscillations in surface temperature, Pacific Decadal Oscillation, and Interdecadal Pacific Oscillation series. Multidecadal oscillations with similar periods to those described here are well known in climate indices. Fitted model terms were consistent with flow trends being influenced by at least two drivers, one oscillating and the other monotonic. Anthropogenic warming is a candidate driver for the monotonic decline, and variation in (internal) climatic circulation for the oscillating trend, but others were not ruled out. The recent upturn in streamflows suggests that anthropogenic warming has not been the dominant factor driving streamflow trends, at least until 2015. Climate projections based on simulations that omit drivers of multidecadal variation are likely to underestimate the range, and rate of change, of future climatic variation.     

The Effect of Local Biomass Projects on Energy Balance and GHG Emission: A Life Cycle Approach

Emerging attention has been given to the use of biomass in local areas for its contribution to reducing fossil fuel dependence and mitigating global warming. The objective of the present study is to develop a method that quantitatively assesses the effects of local biomass projects on fossil fuel consumption and greenhouse gas (GHG) emission. A practical method based on a life cycle approach is proposed and applied to a case of bioethanol project in Miyako Islands of Japan. The project is aiming to produce bioethanol from molasses within the islands, and to replace the entire gasoline consumed in the islands to E3 fuel (i.e., a mixture of 3% ethanol and 97% gasoline by volume). The assessment using the developed method revealed that, first, the complete shift from gasoline to E3 fuel allows for decreases in fossil fuel consumption and GHG emission. Second, the performance of the project is improved by the integration of the ethanol plant and the sugar factory. Moreover, the assessment found that, in small-scale bioethanol projects, the contribution of capital goods to life cycle fuel consumption and GHG emission is not negligible.     

Climate voting in the US Congress: the power of public concern

In the United States, few constituents know and understand climate policy, prioritize it as a political topic, or let their voting decisions depend on it. In these conditions, representatives would not be expected to pay heed to constituents’ climate concern in their voting decisions. Still, even after controlling for the presence of interest groups, campaign finance, and legislators’ party affiliation and ideology, there is a consistent link between public opinion and votes on cap-and-trade legislation in the House (and to a lesser degree in the Senate). The same is true when public opinion is simulated based on pre-vote district characteristics. Explanations for these findings are discussed.     

沼气增温与控制系统的设计与仿真

冬季北方寒冷地区温度偏低,难以满足大中型沼气厌氧发酵系统对于温度的要求。为了解决该问题,针对天津地区某奶牛场沼气工程,设计了一套回收发电机余热并辅助电加热为发酵罐体供热的沼气增温控制系统,且实验确定最佳控制温度为35℃。在该系统中,罐体内部均匀布置竖直型循环加热管路,从而使料液温度分布更加均匀,热响应更加迅速,6 d左右即可将发酵罐内发酵料液提升到所需最佳温度;另外,采用罐内部温度及循环水流量的反馈调节,使料液的温度波动维持在±1℃范围内,解决了在冬季由于温度过低而导致沼气产气率偏低、甚至停滞的问题;同时,采用MATLAB软件对基于F-PID及传统PID的温度控制系统进行了仿真。对比结果表明,F-PID控制器较传统PID控制器超调量减小3℃,响应时间缩短60%,表明F-PID系统具有更高的效率、稳定性及实用价值。     

Prediction of future disposal of end-of-life refrigerators containing CFC-11

The objective of this study was to predict the number of refrigerators containing CFC-11 blown isolation foam and the amount of CFC-11 banked in these refrigerators. By using a Weibull-based survival function, the number of CFC-11 containing and still-functioning refrigerators was estimated to be approximately 1.6 million in 2013 in Turkey. In order to determine the amount of CFC-11 in the isolation foam of these refrigerators, polyurethane (PU) foam samples were taken from a refrigerator manufactured in 1993 and the quantity of CFC-11 was analyzed by a GC-MS. It was determined that 113–195 mg CFC-11/g PU remains in the PU foam depending on the location such as door, sides, top and bottom. Knowing that a mid-sized refrigerator contains 4 kg PU on average, the total amount of PU foam to be disposed of is 6344 tons when the CFC-11 containing refrigerators in Turkey become obsolete in the near future. Furthermore, 717–1237 tons of CFC-11 are expected to be banked in the PU foam of these refrigerators which will exert an equivalent amount of ozone depleting potential (ODP). In addition, the global warming potential will vary between 3.4 and 5.9 million tons of CO₂.     

生物膜填料塔净化低浓度苯乙烯废气的实验研究

研究了进口气体中苯乙烯浓度、气体流量和液体流量等3个因素对生物膜填料塔净化苯乙烯废气的影响。研究结果表明，当进口气体中苯乙烯浓度为1000mg／m^3以下、气体流量为200L／h、循环液流量为10L／h的操作条件下，废气中苯乙烯的去除率可达90％以上。