Effects of development of wind energy and associated changes in land use on bird densities in upland areas

Wind energy development is the most recent of many pressures on upland bird communities and their habitats. Studies of birds in relation to wind energy development have focused on effects of direct mortality, but the importance of indirect effects (e.g., displacement, habitat loss) on avian community diversity and stability is increasingly being recognized. We used a control-impact study in combination with a gradient design to assess the effects of wind farms on upland bird densities and on bird species grouped by habitat association (forest and open-habitat species). We conducted 506 point count surveys at 12 wind-farm and 12 control sites in Ireland during 2 breeding seasons (2012 and 2013). Total bird densities were lower at wind farms than at control sites, and the greatest differences occurred close to turbines. Densities of forest species were significantly lower within 100 m of turbines than at greater distances, and this difference was mediated by habitat modifications associated with wind-farm development. In particular, reductions in forest cover adjacent to turbines was linked to the observed decrease in densities of forest species. Open-habitat species’ densities were lower at wind farms but were not related to distance from turbines and were negatively related to size of the wind farm. This suggests that, for these species, wind-farm effects may occur at a landscape scale. Our findings indicate that the scale and intensity of the displacement effects of wind farms on upland birds depends on bird species’ habitat associations and that the observed effects are mediated by changes in land use associated with wind-farm construction. This highlights the importance of construction effects and siting of turbines, tracks, and other infrastructure in understanding the impacts of wind farms on biodiversity.     

Gillnet illumination as an effective measure to reduce sea turtle bycatch

The growing demand for fish around the world is an immediate threat to marine megafauna that are unintentionally captured in commercial and artisanal fishery operations. Bycatch mitigation strategies, such as turtle excluder devices, circle hooks, and net illumination, have successfully reduced this risk in some fisheries. We explored the effectiveness of gillnet illumination to reduce sea turtle captures in 2 artisanal fisheries (Mankoadze and Winneba, Ghana) under normal fishing conditions. We first quantified sea turtle bycatch in Ghana's artisanal gillnet fishery from 15 boats for 12 months. We then quantified catch of targeted species and sea turtle bycatch from 20 boats for 15 months (7427 net sets). For 10 of these boats, we placed a Centro Economy green light (1 LED) at each 10-m interval on the net. We also quantified target catch and sea turtle bycatch from 30 boats for 8 months (2250 net sets). In 15 of these boats, a Centro Deluxe green light (3 LEDs) was installed at 15-m intervals. Boats with economy lights and those with deluxe lights both exhibited an 81% decrease in sea turtle captures (W = 1, p < 0.001, n = 20; W = 215, p < 0.001, n = 30, respectively) compared with control boats without lights. Illuminated nets resulted in fewer turtle catches for leatherback (Dermochelys coriacea), olive ridley (Lepidochelys olivacea), and green sea turtles (Chelonia mydas) (p < 0.05 for all species). Target catch (mass) (W = 53, p = 0.853 n = 20; W = 76, p = 0.449, n = 23) and value (W = 50, p = 1, n = 20; W = 69, p = 0.728, = 23) were not different across treatments. Our study affirms net illumination can reduce capture rates of 3 species of sea turtles, including the imperiled leatherback. Gear modification methods can successfully reduce bycatch if they are affordable and have broad applications for multiple species in different fisheries.     

油酸铵改性的高活性TiO2/V-TiO2复合光催化剂的制备及光催化降解甲基橙的研究

采用溶胶-凝胶法,将经过油酸铵改性的掺钒二氧化钛粉末投入到纯TiO2溶胶中,烘干、煅烧,制得带有n-n异质结半导体结构的复合型高活性掺钒二氧化钛光催化剂,并通过XRD、TEM、XPS等技术对样品进行了表征。通过对甲基橙溶液的光催化降解实验来考察TiO2/V-TiO2催化剂的光催化活性。结果表明：TiO2/V-TiO2复合催化剂拥有比纯TiO2更高的光催化活性。其中,V的掺杂摩尔分数为0.5%、TiO2：V-TiO2的质量比为10∶1的最佳复合催化剂,其光催化活性是纯TiO2的5.1倍。     

沸石的改性及其对氨氮吸附特征

为研究不同改性方法及其组合顺序对天然沸石吸附NH₄+效率的影响及其吸附特征,选择盐、高温、酸3种改性方法进行不同组合. 结果显示,改性组合顺序对天然沸石的吸附性能影响较明显,最佳改性组合顺序为“盐+酸+高温”,其改性后的沸石在初始ρ(NH₄+)为15、30和50 mg/L下对NH₄+的去除率分别为87%、92%和94%. 采用Langmuir和Freundlich 2种方程来拟合“盐+酸+高温”改性后沸石的吸附行为,表明其更符合Langmuir模型,R2为0.998 5,其最大吸附量(q_max)为8.23 mg/g,并且其吸附过程符合一级动力学方程, R 2为0.998 1. 扫描电子显微镜(SEM)和比表面积(BET)分析结果表明,沸石经最优组合改性后表面形态明显变化,比表面积增大.      

NaCl改性人造沸石去除废水中氨氮的性能及其影响因素

采用NaCl溶液对人造沸石进行改性处理,考察NaCl溶液浓度对改性效果的影响.通过表面特征分析、静态吸附试验及吸附等温分析,进一步比较了人造沸石和改性人造沸石对氨氮的吸附去除性能.由X射线衍射(XRD)分析可知,沸石经改性后表面变粗糙,同时出现NaCl晶体特征衍射峰.试验结果表明,1.0 mol·L-1NaCl溶液对人造沸石的改性效果最佳;在沸石用量为1.0 g(50 mL废水)、氨氮浓度为10 mol·L-1、反应时间为40 min、反应温度为25℃和pH值为6.52条件下,改性人造沸石对氨氮的吸附效果最佳,去除率为96.02％.Langmuir和Freundlich吸附等温方程均可较好地拟合2种沸石对氨氮的吸附过程.改性人造沸石对氨氮的吸附饱和容量(21.46 mg·g-1)远大于人造沸石(9.03 mg·g-1).     

NaOH改性落叶松锯木屑对活性染料的吸附性能

通过间歇式试验研究NaOH改性落叶松锯木屑对活性染料KN-B、K-2BP和KN-R的吸附脱色性能。结果表明,酸性条件下该改性木屑对3种染料均具有较好的脱色效果。在初始pH值为3时,3种染料的吸附脱色率均表现为随温度升高而逐渐降低,随改性木屑用量的增加而增加的趋势;而随染料初始浓度的增大,表现出先升高后降低的趋势。在初始pH值为3、温度为298 K条件下,3种染料在改性锯木屑上的等温吸附符合Langmuir吸附模型,KN-B、K-2BP和KN-R的最大饱和吸附量分别为22.32、10.47和14.93 mg.g-1,吸附自由能ΔG298 K分别为-12.61、-9.77和-14.45 kJ.mol-1,均为物理性自发吸附过程。试验条件下,KN-R、KN-B和K-2BP的吸附动力学均符合准二级动力学吸附方程,吸附速率常数依次减小。综合等温吸附和吸附动力学研究结果表明,3种染料的脱色效果以KN-R为最好,KN-B次之,K-2BP最差。     

复配超细粉体三相泡沫的制备与稳定性研究

为改善泡沫灭火剂的高温稳定性和抗复燃性能,将石墨粉、膨润土和空心玻璃微珠按一定比例复配加入泡沫灭火剂中制备防灭火三相泡沫,利用自主设计的实验台架,研究其发泡、稳泡及油面热稳定性等主要性能,分析复配超细粉体对泡沫灭火剂稳定性的影响机理。实验证明,复配粉体的加入可使泡沫灭火剂在高温下的稳定时间延长10倍以上,粉体颗粒会在泡沫表面形成一层致密壳层,增强泡沫的隔热阻燃性能,石墨粉的存在使壳层更加致密且增强了泡沫的流动性,但会对泡沫的发泡性能产生较大的影响,当空心玻璃微珠和石墨粉的添加质量比为5∶2时,整体效果较好。     

层状双金属氢氧化物覆膜改性人工湿地无烟煤基质除磷

分别选取MgCl2、ZnCl2、CaCl2、CoCl3、FeCl3、AlCl3等6种金属化合物合成9种不同类型层状双金属氢氧化物(LDHs),利用其对垂直流人工湿地无烟煤基质进行LDHs覆膜改性;构建模拟基质试验柱,对改性前后的无烟煤基质进行模拟垂直流人工湿地净化污水试验.结果表明:相对于原始无烟煤基质,各种LDHs覆膜改性基质对总磷、溶解性总磷、颗粒态磷和磷酸盐的去除率均有不同程度的提高;Zn2+参与合成的改性基质对总磷、溶解性总磷、颗粒态磷和磷酸盐均有很好的去除效果,其中ZnCo-LDHs和ZnAl-LDHs改性基质对总磷和溶解性总磷的平均去除率超过95%,对磷酸盐平均去除率达到98%以上.     

Sorption of phenanthrene to biochar modified by base

Biochar (BC) is a potential material for removal of polycyclic aromatic hydrocarbons from soil and water, and base modification is a promising method for improving its sorption ability. In this study, we synthesized a series of base-modified biochars, and evaluated their sorption of phenanthrene. Original biochars were produced by pyrolysis of three feedstocks (rice straw, wood and bamboo) at five temperatures (300°C, 350°C, 400°C, 500°C and 700°C). Base-modified biochars were further obtained by washing of biochars with base solution. The base soluble carbon (SC) was extracted from the supernatant, which were only obtained from biochars pyrolyzed at low temperatures (<500°C) and the content was decreased with the increase of pyrolysis temperature. The SC content between different feedstocks followed the trend of rice straw>wood>bamboo when same pyrolysis conditions were applied. It was found that base modification improved the sorption of phenanthrene on biochars that SC could be extracted from (extractable-BCs). However, base treatment but had limited effects for biochars that no SC could be extracted from. It suggested that base modification improved the sorption of phenanthrene to extractable-BCs by removing the SC and thus increasing the surface area and hydrophobicity. Therefore, base modification was suggested to be used in modifying extractable-BCs.

Open image in new window

     

白云母/硅微粉疏水改性对三相泡沫热稳定性的影响

为了制备高热稳定性的三相泡沫,对白云母/硅微粉疏水改性。采用十六烷基三甲氧基硅烷(HTEOS)为改性剂,以接触角、粒度分析、FTIR为表征。在合成蛋白泡沫中按比例添加粉体制备三相泡沫,以自主设计可视化油池进行热稳定性试验并与两相泡沫对比。结果表明:改性白云母的性质为“两亲”,改性硅微粉表现为疏水;三相泡沫热稳定性高于两相泡沫,三相泡沫中,利用改性白云母制备的三相泡沫热稳定性最优,覆盖至破灭时间为1 905 s,而改性硅微粉制备的三相泡沫热稳定性不足,覆盖至破灭时间仅为983 s。