基于尾涡强度的无人机与民机纵向安全间隔评估研究

为了解决无人机频频入侵机场净空,与民航客机发生危险接近的问题,以碰撞风险为量化指标,对无人机与民机需要保持的纵向安全间隔进行评估研究。分析民机尾涡流场对无人机运行的影响,利用Crow近场涡强度消散理论,得到实际尾迹影响区改进Reich碰撞模板,据此建立CNS/GPS性能环境下的纵向间隔评估模型,通过Matlab进行间隔值求解。研究结果表明:模型可以较为准确地反映民机起飞初始爬升阶段无人机尾随运行时导航性能和尾涡迹对所需最小间隔值的影响,并得到给定安全目标水平的计算结果。     

石化装置安全仪表系统KooN表决结构的误跳车率定量分析

为了更准确量化安全仪表系统的误跳车率,基于联锁回路SIF中传感器、逻辑解算器、执行机构引发误跳车的不同失效机理和模型,考虑共因失效对误跳车率的影响,提出1种更符合实际并适用于异型KooN结构的新子系统误跳车率计算模型（STR of Non-identical Redundant System,SNRS）。针对SIF回路的误跳车率计算,建立了1种分析安全联锁SIF回路误跳车率（Reliability based Spurious Trip,RST）的计算框架。研究结果表明:以某聚丙烯装置第三反应器保护系统为例,将SNRS和RST方法与目前主流的多种计算方法进行数值计算对比,验证了方法的有效性,能够有效进行定量分析。     

Are older drivers’ driving patterns during an on-road driving task representative of their real-world driving patterns?

Abstract

Objective: The current study investigated whether older drivers’ driving patterns during a customized on-road driving task were representative of their real-world driving patterns.

Methods: Two hundred and eight participants (male: 68.80%; mean age?=?81.52 years, SD?=?3.37 years, range?=?76.00–96.00 years) completed a customized on-road driving task that commenced from their home and was conducted in their own vehicle. Participants’ real-world driving patterns for the preceding 4-month period were also collected via an in-car recording device (ICRD) that was installed in each participant’s vehicle.

Results: During the 4-month period prior to completing the on-road driving task, participants’ median real-world driving trip distance was 2.66?km (interquartile range [IQR]?=?1.14–5.79?km) and their median on-road driving task trip distance was 4.41?km (IQR?=?2.83–6.35?km). Most participants’ on-road driving task trip distances were classified as representative of their real-world driving trip distances (95.2%, n?=?198).

Conclusions: These findings suggest that most older drivers were able to devise a driving route that was representative of their real-world driving trip distance. Future research will examine whether additional aspects of the on-road driving task (e.g., average speed, proportion of trips in different speed zones) are representative of participants’ real-world driving patterns.     

供水管网震后流量监测点的动态分级优化布局研究

为了提高管网地震监测点布局的准确性和合理性,基于管网微观水力计算模型和动态分级法,提出供水管网震后流量监测点的动态分级优化布局模型。首先,利用管网微观水力计算模型计算管段流量的影响系数,构建管段的影响系数矩阵,并利用信息熵确定管段权重;其次,标准化处理影响系数矩阵,通过聚类迭代提出供水管网地震流量监测点优化布局的动态分级方法,对供水管网震后流量监测点进行优化布置分级评定;最后,根据工程实例进行方法实践,结果表明:供水管网中的管线分类较为科学合理,地震监测点在供水管网上分布也比较均匀,而且该模型在一定程度上消除了人为因素的影响,保障了震时管网的监控效果和日常建设的合理性。     

基于改进的非线性GM(1,1)模型的职业病预测研究

为了更准确地预测职业病,在传统GM(1,1)模型的基础上,提出改进的非线性GM(1,1)模型,在传统的GM(1,1)模型中引入弱化算子,将紧邻均值与原始数据之间的线性假设改为非线性假设,提高曲线的拟合度。以2005—2014年的全国职业病例数为研究对象,进行数据拟合和预测分析,其中以2014年职业病例数作为验证数据,并利用后验差比值和小误差概率2个参数,检验该改进模型的预测精度。由应用实例的分析结果可知:在职业病发病趋势的预测方面,改进的非线性GM(1,1)模型的预测精度提高到一级,曲线拟合度较高,预测得到2015年的职业病例数为34 900例。     

Double Green Process: a low environmental impact method for recycling of CdTe,a-Si and CIS/CIGS thin-film photovoltaic modules

On the basis of the method for managing the end of life of CdTe photovoltaic panels previously proposed by the authors, a new method for the recycling of all types of thin-film panels (CdTe, a-Si and CIS/CIGS) has been developed and optimised under a research project founded by Enel Foundation and CRUI Foundation. The DGP process has been developed through a feasibility study carried out from three points of view: technical, environmental and economic. The process is composed by two sub-processes matched to each other, one suitable for CdTe panels (named DGPa) and the other one for a-Si and CIS/CIGS panels (DGPb). The Double Green Panel process is based mainly on mechanical treatments with a minimum use of chemicals and it is characterised by a greater level of automation and a high flexibility in production capacity. The potential environmental impacts of various configurations of the DGP process have been extensively analysed with LCA tool in order to develop an environmentally friendly process. The economic feasibility has been assessed through the Discounted Cash Flow Analysis (DCFA) method. The revenues associated to the recovery of valuable and common materials and the recycling costs have been taken into account.     

A multi-objective design optimisation of eco-friendly aircraft: the impact of noise fees on airplanes sustainable development

The current work deals with multi-objective optimisations including financial merit factors in the multi-disciplinary conceptual design of a commercial aircraft with a specific focus on noise social cost. The results of optimisations using financial and performance-oriented objective functions have been analysed and combined in a multi-objective optimisation problem using a three-dimensional objective vector. The main novelty of the present work is the analysis of social cost noise fees effectiveness integrated in financial models embracing a wider group of stakeholders’ interests. The foundations of this research lie on the air traffic increase envisaged in the next decades and the contextual growth of the urban areas nearby airport facilities. This scenario requires the aeronautical industry to handle the environment challenge taking into account all the social and economic effects. Indeed, the consolidated technology has approached a saturation point, therefore breakthrough concepts and configurations are mandatory. This matter is addressed as a highly multi-disciplinary problem within conceptual design framework. The financial model proposed is shown to highlight the need of appropriate noise fees as instruments to push all stakeholders towards a technology radical renewal and encourage the aeronautical industry towards a shared strategy in the development of an eco-friendly commercial aviation system.     

CO2 emission driving forces and corresponding mitigation strategies under low-carbon economy mode: evidence from China’s Beijing–Tianjin–Hebei region

On account of the background of China’s “new normal” characterized by slower economic growth, this paper analyses the low-carbon economy status quo in the Beijing–Tianjin–Hebei region and empirically investigates the relationship between carbon dioxide (CO₂) emissions and its various factors for China’s Beijing–Tianjin–Hebei region using panel data econometric technique. We find evidence of existence of Environmental Kuznets Curve. Results also show that economic scale, industrial structure, and urbanization rate are crucial factors to promote CO₂ emissions. However, technological progress, especially the domestic independent research and development, plays a key role in CO₂ emissions abatement. Next, we further analyze the correlation between each subregion and various factors according to Grey Relation Analysis. Thereby, our findings provide important implications for policymakers in air pollution control and CO₂ emissions reduction for this region.     

The humanitarian common logistic operating picture: a solution to the inter‐agency coordination challenge

Although significant progress has been made in developing the practice of humanitarian logistics, further improvements in efficiency and effectiveness have the potential to save lives and reduce suffering. This paper explores how the military/emergency services’ concept of a common operating picture (COP) can be adapted to the humanitarian logistics context, and analyses a practical and proven approach to addressing the key challenge of inter‐agency coordination and decision‐making. Successful adaptation could provide the mechanism through which predicted and actual demands, together with the location and status of material in transit, are captured, evaluated, and presented in real time as the basis for enhanced decision‐making between actors in the humanitarian supply network. Through the introduction of a humanitarian logistics COP and its linkages to national disaster management systems, local communities and countries affected by disasters and emergencies will be better placed to oversee and manage their response activities.     

A comparison of pretreatments on release of sugars from sweet sorghum bagasse for bioethanol production

Dilute acid pretreatment and steam pretreatment were evaluated for maximum sugars release and ethanol production from sweet sorghum bagasse (SSB). The fermentation potential of the condensate and hydrolysate obtained from steam pretreatment (10 kg/cm², 10 minutes) and dilute acid hydrolysis (1% (w/w) sulphuric acid, 25% substrate loading) respectively, was checked with Pichia stipitis NCIM 3497 and Debaryomyces hansenii sp. Ethanol production and yield using acid hydrolysate was higher with Debaryomyces hansenii sp. (28.4 g/L and 0.37 g/g respectively) as compared with Pichia stipitis NCIM 3497 (21.9 g/L and 0.29 g/g respectively).