Making Capacity Building Meaningful: A Framework for Strategic Action

This paper aims to give practical meaning to ‘capacity building’ through (a) identifying a suite of practical measures, such as mentoring or best practice guidelines, that have been shown to or are considered to build human, social, institutional, and economic capital; (b) placing these measures within a broader systems framework; and (c) exploring stakeholder feedback on specific measures to inform framework implementation. The 29 measures described provide actors, whether government or nongovernment, with a suite of practical investment choices for building capacity. These measures are then clustered into eight groups according to their primary purpose and placed within a systems framework. The framework provides a tool for actors with responsibilities for or an interest in capacity building to inform more holistic and strategic targeting of effort and investment. Stakeholder feedback gathered through surveys and workshops is subsequently reported to further inform implementation of specific measures within the framework’s eight groupings. The framework presented may be built upon through the identification and inclusion of further capacity building measures. The research is conducted within the context of decentralized governance arrangements for natural resource management (NRM), with specific focus on Australia’s recently formalized 56 NRM regions and their community-based governing boards as an informative arena of learning. Application of the framework is explored in the Australian setting through the identification and comparison of measures supported and most preferred by four major stakeholder groups, namely board members, regional NRM organization staff, policy/research interests, and Indigenous interests. The research also examines stakeholder perceptions of capacity issues, and whether these issues are likely to be addressed through implementing their preferred measures.

The greenhouse gas balance of the Province of Siena

There is a profound debate over how to assign greenhouse gas (GHG) responsibilities; therefore, we have decided to follow IPCC guidelines, as they offer the only standardized method. We have identified each type of greenhouse emission and its level of absorption. We have studied the province and its districts and municipalities. We have determined that the energy sector is that with the highest level of emissions, even if the per capita emissions of the Province of Siena are very low. This is caused by a very low level of industrialization and the presence of a local geothermal production of energy. In order to highlight this aspect, we have considered scenarios both with and without geothermal production. Our research was then focused on single districts (groups of homogenous municipalities) and municipalities, where we found great differences among the greenhouse emissions of the areas. We have constructed a map of the greenhouse emissions of the whole province. It has been interesting to note that there are 14 municipalities with net negative emissions, seven with low positive emissions, 12 with medium positive emissions and three with elevated positive emissions. These latter correspond to the main city and to two of the most industrialized municipalities.     

Relationships between anaerobic consortia and removal efficiencies in an UASB reactor degrading 2,4 dichlorophenol (DCP)

To gain more insight into the interactions between anaerobic bacteria and reactor performances (chemical oxygen demand-COD, 2,4 dichlorophenol-2,4 DCP removals, volatile fatty acid-VFA, and methane gas productions) and how they depended on operational conditions the microbial variations in the anaerobic granular sludge from an upflow anaerobic sludge blanket (UASB) reactor treating 2,4 DCP was studied. The study was composed of two parts. In the first part, the numbers of methanogens and acedogens in the anaerobic granular sludge were counted at different COD removal efficiencies. The relationships between the numbers of methanogens, the methane gas production and VFA production were investigated. The COD removal efficiencies increased to 74% from 30% while the number of total acedogens decreased to 10 from 30 cfu ml(-1). The number of total methanogens and acedogens varied between 11 x 10(3) and 10 x 10(9)MPN g(-1) and 10 and 30 cfu ml(-1) as the 2,4 DCP removal efficiencies were obtained between 60% and 99%, respectively. It was seen that, as the number of total acedogens decreased, the COD removal efficiencies increased. However, the number of total methanogens increased as the COD removal efficiencies increased. Correlations between the bacterial number and with the removal efficiencies obtained in different operational conditions were investigated. From the results presented in this paper a high correlation between the number of bacteria, COD removals, methane gas percentage, 2,4 DCP removals and VFA was observed. In the second part, methanogen bacteria in the anaerobic granular sludge were identified. Microbial observations and biochemical tests were applied to identify the anaerobic microorganisms from the anaerobic granular sludge. In the reactor treating 2,4 DCP, Methanobacterium bryantii, Methanobacterium formicicum, Methanobrevibacter smithii, Methanococcus voltae, Methanosarcina mazei, Methanosarcina acetivorans, Methanogenium bourgense and Methanospirillum hungatei were identified.     

Development of a highly sensitive extractive spectrophotometric method for the determination of nickel(II) from environmental matrices using N-ethyl-3-carbazolecarboxaldehyde-3-thiosemicarbazone

Nickel(II) reacts with N-ethyl-3-carbazolecarboxaldehyde-3-thiosemicarbazone (ECCT) and forms a yellow colored complex, which was extracted into n-butanol from sodium acetate and acetic acid buffer at pH 6.0. The absorbance value of the Ni(II)-ECCT complex was measured at different intervals of time at 400nm, to ascertain the time stability of the complex. The extraction of the complex into the solvent was instantaneous and stable for more than 72h. The system obeyed Beer's law in the concentration range of 1.2-5.6mugml(-1) of nickel(II), with an excellent linearity and a correlation coefficient of 0.999. The molar absorptivity and Sandell's sensitivity of the extracted species were found to be 1.114x10(4)Lmol(-1)cm(-1) and 5.29x10(-3)mugcm(-2) at 400nm, respectively. Hence, a detailed study of the extraction of nickel(II) with ECCT has been undertaken with a view to developing a rapid and sensitive extractive spectrophotometric method for the determination of nickel(II) when present alone or in the presence of diverse ions which are usually associated with nickel(II) in environmental matrices like soil and industrial effluents. Various standard alloy samples (CM 247 LC, IN 718, BCS 233, 266, 253 and 251) have been tested for the determination of nickel for the purpose of validation of the present method. The results of the proposed method are comparable with those from atomic absorption spectrometry and were found to be in good agreement.     

Anticipated Performance Index of some tree species considered for green belt development in and around an urban area: a case study of Varanasi city, India

It is well established that trees help to reduce air pollution, and there is a growing impetus for green belt expansion in urban areas. Identification of suitable plant species for green belts is very important. In the present study, the Air Pollution Tolerance Index (APTI) of many plant species has been evaluated by analyzing important biochemical parameters. The Anticipated Performance Index (API) of these plant species was also calculated by considering their APTI values together with other socio-economic and biological parameters. Based on these two indices, the most suitable plant species for green belt development in urban areas were identified and recommended for long-term air pollution management.     

Source identification and characterization of the accumulating non-biodegradable organics in Korean reservoirs

An increase in the chemical oxygen demand (COD) has been noticed in most Korean reservoirs. Therefore, this research systematically investigated the causes of organic accumulation. Samples of soil affecting the quality of water of reservoirs were collected at various sources and analyzed for their organic characteristics. The COD to biochemical oxygen demand (BOD) ratio was used as the key parameter in the evaluation of non-biodegradable (NBD) organic accumulation in the reservoirs. Soil samples containing plant roots were agitated, with the supernatant showing COD/BOD ratios of less than 2.8, while those of the composted tree leaves were greater than 5.0, suggesting that humic substances produced in forest areas are a major cause of NBD organic accumulation in reservoirs. In addition, the organic fractionation of the leachate from leaching tests showed that of the various types of hydrophobic natural organic matter (NOM), the larger molecular weight humic acid makes a greater contribution than fulvic acid to the increase in the NBD COD in Korean reservoirs.     

Analysis of the nitrifying bacterial community in BioCube sponge media using fluorescent in situ hybridization (FISH) and microelectrodes

There is growing interest in the development of more cost-effective and retrofit technologies for the upgrade and expansion of existing wastewater treatment plants with extreme space constraints. A free-floating sponge media (BioCube) process, using a 24L lab scale reactor, was operated to study the nitrification profiles and microbial community. The COD removal efficiencies were maintained, at an average of 95%, with the mixed liquor suspended solids (MLSS) inside the BioCube sponge media maintained at 12,688mg/L. The nitrification removal efficiencies were between 92% and 100%, with an average value of 99%. From the results of microelectrode measurements, the ammonium ion concentration was found to rapidly decrease from the surface of the BioCube sponge media to a depth of 2mm due to chemical reactions carried out by ammonia oxidizing bacteria (AOB) species. Multi-fluorescence in situ hybridization (FISH) has been used to investigate the spatial distributions of various microbial activities within reactors. Microbial communities were targeted using different oligonucleotide probes specific to AOB and nitrite oxidizing bacteria (NOB). There were a large number of AOB populations, but these were not uniformly distributed in the biofilm compared to the NOB populations.     

Effective EU and Member State policies for stimulating CCS

Although CO₂ capture and storage (CCS) is widely recognised as an option to mitigate climate change, consistent and effective EU policies to advance CCS are still absent. This paper discusses policy instruments for advancing large-scale deployment of CCS in the European Union, and evaluates them in a multi-criteria analysis. The EU Emissions Trading Scheme (EU-ETS) is a cost-effective instrument for limiting greenhouse gas emissions, but it is questionable whether its currently limited time horizon and short-trading periods will lead to substantial CCS diffusion. Complementary policies at the EU and the Member State level may repair this and provide sufficient incentives for CCS. Potential policies include financial instruments such as investment subsidies, a feed-in scheme, or a CO₂ price guarantee, as well as a CCS mandate or a low-carbon portfolio. These policy options differ with respect to their environmental effectiveness, possible interaction with the EU-ETS, costs and financial risk involved, and their competition with other mitigation options. Interactions between Member State policies and the EU-ETS are smaller in scope than those of EU-wide policies, but they are more likely to lead to displacement of financial resources from other low-carbon technologies. In addition, national policies may pose a significant part of the financial risk of CCS operations with Member States, reducing the operator's incentive to innovate. Overall, structural policies at the EU level, such as a mandate or a low-carbon portfolio standard would be more conducive for realising large-scale deployment of CCS across the EU as well as more acceptable to environmental organisations.     

Reaction pathways of dimethyl phthalate degradation in TiO2-UV-O2 and TiO2-UV-Fe(VI) systems

The photocatalytic degradation of dimethyl phthalate (DMP) in aqueous TiO₂ suspension under UV illumination has been investigated using oxygen (O₂) and ferrate (Fe(VI)) as electron acceptors. The experiments demonstrated that Fe(VI) was a more effective electron acceptor than O₂ for scavenging the conduction band electrons from the surface of the catalyst. Some major intermediate products from DMP degradation were identified by HPLC and GC/MS analyses. The analytical results identified dimethyl 3-hydroxyphthalate and dimethyl 2-hydroxyphthalate as the two main intermediate products from the DMP degradation in the TiO₂–UV–O₂ system, while in contrast phthalic acid was found to be the main intermediate product in the TiO₂–UV–Fe(VI) system. These findings indicate that DMP degradation in the TiO₂–UV–O₂ and TiO₂–UV–Fe(VI) systems followed different reaction pathways. An electron spin resonance analysis confirmed that hydroxyl radicals existed in the TiO₂–UV–O₂ reaction system and an unknown radical species (most likely an iron–oxo species) is suspected to exist in the TiO₂–UV–Fe(VI) reaction system. Two pathway schemes of DMP degradation in the TiO₂–UV–O₂ and TiO₂–UV–Fe(VI) reaction systems are proposed. It is believed that the radicals formed in the TiO₂–UV–O₂ reaction system preferably attack the aromatic ring of the DMP, while in contrast the radicals formed in the TiO₂–UV–Fe(VI) reaction systems attack the alkyl chain of DMP.     

Determination of 10 particle-associated multiclass polar and semi-polar pesticides from small streams using accelerated solvent extraction

A new analytical method using accelerated solvent extraction was developed for the determination of 10 particle-associated polar and semipolar pesticides. In addition, six deuterated analogues of the target compounds were evaluated as internal standards. The method yielded acceptable accuracy (73–103% recovery) and precision (<25% relative standard deviation) for eight compounds. Using size exclusion chromatography (SEC) as cleanup step resulted in higher recoveries compared to solid phase extraction (SPE) cleanup.

Deuterated standards with 10 or more deuterium atoms performed well as internal standards concerning similar recovery and correlation with the target analytes.

The method was employed to extract particle-associated pesticides from 16 streams located in an area with intense agriculture in France. Acetochlor, pirimicarb, tebuconazole, fenpropidin, -endosulfan and chlorfenvinphos were detected at concentrations up to 1 mg kg⁻¹ dry weight. A comparison with aquatic toxicity data indicated potential risk to the benthic fauna exposed to these concentrations of pirimicarb, -endosulfan and chlorfenvinphos.

We suggest that the method presented here be used for the extraction and quantitation of particle-associated polar pesticides.