Northern Idaho House Dust and Soil Lead Levels Compared to the Bunker Hill Superfund Site

House dust has been identified as a major exposure medium for lead (Pb) in children. High levels of Pb in soil and house dust have been recorded at the Bunker Hill Superfund Site (BHSS) in northern Idaho, an historic mining and smelting district. Soil and dust remediation at the site was required; however, regional background soil and dust Pb levels had not been well characterized. The objective of this survey was to determine background house dust Pb levels and to compare those levels with concentrations, and dust and Pb loading rates measured at the BHSS. Soil and house dust samples were collected in five towns demographically similar to the BHSS but unaffected by the mining industry. The background concentrations and loading rates were significantly lower than those observed at the site. House age was a significant factor affecting background soil and house dust Pb concentrations and loading rates.     

2011年春季辽宁一次沙尘天气过程及其对不同粒径颗粒物和空气质量的影响

利用2011年5月11—12日辽宁沙尘天气过程的相关资料,分析了沙尘天气对不同粒径颗粒物及空气质量的影响及此次沙尘过程的天气成因.结果表明:沙尘天气发生前后可吸入颗粒物PM₁₀、PM_2.5和PM₁的浓度变化很大,沈阳、鞍山、本溪和丹东4城市PM₁₀、PM_2.5的小时浓度最大值都增大了1.5~20倍;粗粒子PM_(2.5~10)的数量浓度分别增加了30~41倍,质量浓度分别增加了27~30倍;细粒子PM_(1~2.5)的质量浓度分别增加了30~35倍,数量浓度分别增加了15~30倍;微粒子的数量浓度和质量浓度各城市表现不同,沈阳微粒子的数量浓度和质量浓度最大值增大了3倍和5倍,而鞍山PM₁的数量浓度和质量浓度分别减少了50%和10%.受蒙古气旋的影响内蒙古地区产生大风降温天气,大风将内蒙古地区的沙尘带到高空并随西风带向东移动进入辽宁,由于辽宁地区风速比较小,造成了辽宁大部分地区的浮尘天气,并对辽宁各地空气质量造成了严重影响,除丹东外辽宁其他13个城市空气质量都达到了轻微污染到重度污染的级别,铁岭、阜新、沈阳和抚顺的污染指数分别超过了300,达到了重度污染的级别.     

车辆限行对道路和施工扬尘排放的影响

采用降尘法对道路和施工扬尘排放进行连续监测,通过限行之前和限行期间数据分析,研究了“好运北京”体育赛事期间机动车交通限行措施对道路和施工扬尘的消减情况、道路和施工扬尘对北京大气环境颗粒物的贡献率、道路和施工扬尘源占本地颗粒物排放总量的比重.结果表明,车辆限行措施对降低道路和施工扬尘的效果明显;环路限行期间降尘量平均值为0.27 g·(m²·d)^-1,限行之前1个月和限行之前7d降尘量平均值为0.81和0.59 g·(m²·d)^-1,主干道和次干道限行期间降尘量平均值为0.21 g·(m²·d)^-1,限行之前1个月和限行之前7 d降尘量平均值为0.54和0.58 g·(m²·d)^-1,道路降尘量下降了60%～70%;限行期间民用建筑施工降尘量平均值为0.27 g·(m²·d)^-1,限行之前20 d为1.15 g·(m²·d)^-1,限行期间公用建筑施工降尘量平均值为1.06 g·(m²·d)^-1,限行之前20 d为1.55 g·(m²·d)^-1,施工降尘下降30%～47%;道路和施工扬尘是北京市颗粒物污染的主要来源,其对环境PM₁₀的贡献率为21%～36%;当本地污染源PM₁₀排放量占环境总量的50%和70%时,道路和施工扬尘PM₁₀排放量分别占本地污染源的42%～72%和30%～51%.     

Effects of particle thermal characteristics on flame microstructures during dust explosions of three long-chain monobasic alcohols in a half-closed chamber

To reveal clearly the effects of particle thermal characteristics on flame microstructures during organic dust explosions, three long-chain monobasic alcohols, solid at room temperature and similar in physical-chemical properties, were chosen to conduct experiments in a half-closed chamber. In the experiments, the dust materials were dispersed into the chamber by air to form dust clouds and the hybrids were ignited by an electrical spark. A high-speed optical schlieren system was used to record the flame propagation behaviors. A fine thermocouple and an ion current probe were respectively used to measure the flame temperature profile and the reaction behaviors of the combustion zone. Based on the experimental results, combustion behaviors and flame microstructures in dust clouds with different thermal characteristics were analyzed in detail. As a result, it was found that the dust flame surfaces were completely covered by cellular structures that significantly increased the flame frontal areas. Flame propagated more quickly and the number of the cellular cells increased as increasing the volatility of the particles. On the contrary, maximum temperature and the thickness of the preheated zone decreased as increasing the volatility of the particles. According to the ion current profile, the particles in the preheat zone were pyrolyzed to intermediate radicals and the radicals' fraction in the higher volatile dust flame was higher than that in the lower volatile dust flame.     

焊接车间烟尘特性及治理措施

焊接生产会产生烟尘,焊接烟尘给人体带来的危害是比较严重的,焊接烟尘的治理方法有多种,合理选用可使焊接生产变成绿色环保型作业.     

不同喷雾方式下低阻文丘里振弦栅除尘配置优化实验研究

为了对比径向外喷和轴向喷雾下的低阻文丘里振弦栅耦合除尘效果,以除尘效率和系统阻力为参照,选定喉管气速、振弦栅数、纤维丝间隙和喉管液气比进行单因素实验。结果表明2种喷雾方式的除尘效率和系统阻力的变化趋势相同。利用SPSS软件进行4因素3水平正交实验设计,在特定参数条件下,2种喷雾方式的因素影响排序相同,除尘效率为纤维栅数＞纤维丝间隙＞喉管气速＞喷雾量;系统阻力为喉管气速＞纤维栅数＞纤维丝间隙＞喷雾量;径向外喷最佳配置为喉管气速24 m/s、喷雾量2.3 L/min、2块间隙为0.8 mm纤维栅板;轴向喷雾为喉管气速28 m/s、喷雾量2.4 L/min、2块间隙为0.8 mm纤维栅板;在最优配置下的除尘性能为径向外喷＞轴向喷雾。     

Study of the influence of melamine polyphosphate and aluminum hydroxide on the flame propagation and explosion overpressure of aluminum magnesium alloy dust

When aluminum magnesium alloy dust floats in the air, a certain ignition energy can easily cause an accidental explosion. To prevent and control the occurrence of accidental explosions and reduce the severity of accidents, it is necessary to carry out research on the explosion suppression of aluminum magnesium alloy dust. This paper uses a vertical glass tube experimental device and a 20 L spherical explosive experimental device to carry out experimental studies on the suppression of the flame propagation and explosion overpressure of aluminum magnesium alloy dust with melamine polyphosphate (MPP) and Al(OH)₃. With increasing MPP and Al(OH)₃ concentrations, the flame brightness darkened, the flame velocity and propagation distance gradually decreased, and P_max and (dp/dt)_max decreased significantly. When the amount of MPP added reached 60%, the flame propagation distance decreased to 188 mm, which is a decrease of 68%, and the explosion overpressure decreased to 0.014 MPa, effectively suppressing the explosion of aluminum magnesium alloy dust. The experimental results showed that MPP was more effective than Al(OH)₃ in inhibiting the flame propagation and explosion overpressure of the aluminum magnesium alloy dust. Finally, the inhibitory mechanisms of the MPP and Al(OH)₃ were further investigated. The MPP and Al(OH)₃ endothermic decomposition produced an inert gas, diluted the oxygen concentration and trapped active radicals to terminate the combustion chain reaction.     

楚雄德胜钢铁公司烧结机尾除尘改造实践

介绍楚雄德胜钢铁公司19·6m2烧结机尾除尘系统改造工程中使用三电极电除尘器的工艺及有关设计技术问题,并根据使用效果进行分析总结。结果表明,在设计参数选择恰当的情况下,三电极电除尘器对烧结烟气有较好的除尘效果,这些经验和操作中存在的问题供烧结机尾除尘工程设计参考。     

Study of the evolution of aerosol emissions from coal-fired power plants due to coagulation, condensation, and gravtitational settling and health impact

This paper studies the scavenging efficiencies of aerosol emissions from coal-fired power plants under different removal mechanisms (coagulation, heterogeneous nucleation and gravitational settling) as a function of time. It also analyses the ‘health impact’ of the aerosol before and after the above dynamic mechanisms by comparing the respirable dust fractions. The well-known equations of evolution are applied to an average PSD that represents the exhaust particulate emissions from coal-fired power plants (i.e. Aboño power plant in Asturias that belongs to Hidrocantábrico Group, S.A.). From this study it is inferred that respirable dust is scavenged with the greatest difficulty and when compared with the initial volume of respirable dust, roughly 20% remains after 18 h of gravitational settling. Therefore, gravitational settling is the main removal mechanism of respirable dust compared to condensation and coagulation.     

机动车零部件产品防尘试验概述以及防尘设备选型探讨

机动车零部件产品通过防尘试验来验证产品质量的可靠性能,本文简单介绍了国内外机动车零部件产品IP防尘等级试验的基本要求,对防尘试验设备选型方面做出了一点探讨.