An approach to calculating allowable watershed pollutant loads

To improve the management of discharge pollutants loads in the reservoirs’ watershed, an approach of the allowable pollutants loads calculation and its allocation, based on the water environment model, was proposed. Establishment of the approach framework was described at first. Under the guidance of this framework, two major steps were as follows: modeling and scenario analysis were involved and should be applied to support the decision of discharge loads management; Environmental Fluid Dynamic Code (EFDC) model was selected as the kernel model in this framework. In modeling step, spatial discretization for establishing cell map in model, data preprocessing, parameter calibration and uncertainty analysis (which is considered as the significantly relevant factor of the margin of safety (MOS)), were conducted. As a result of the research, the model-based approach presented as a combination of estimation and precise calculation, which contributed to scenario analysis step. Some integrated modules, such as scenario simulation, result analysis and plan optimization were implemented as cycles in the scenario analysis. Finally, allowable pollutant loads under various conditions were calculated. The Chaihe Reservoir in Liaoning Province, China was used as a case study for an application of the approach described above. Results of the Chaihe reservoir water quality simulation, show good agreement with field data and demonstrated that the approach used in the present study provide an efficient and appropriate methodology for pollutant load allocation.     

草地退化对三江源区高寒草甸生态系统CO2通量的影响及其原因

为了揭示草地退化对三江源地区高寒草甸生态系统碳通量的影响,利用涡度相关技术,于2006年12月1日~2007年11月30日对三江源地区的退化高寒草甸生态系统的碳通量及生物和环境因子进行观测.结果发现:草地退化对高寒草甸生态系统的碳通量产生了深刻影响,与未退化的高寒草甸生态系统相比,退化高寒草甸生态系统全年总初级生产力(GPP)下降了36.6%,全年生态系统呼吸(Reco)下降了7.9%,全年净生态系统CO2交换(NEE)也由退化前的负值(碳吸收)转变为正值(碳排放),二者相差132.5gC/(m2·a),生态系统由原来的碳汇转变为目前的碳源.这些变化与高寒草甸退化后,生态系统植物地上生物量锐减、植物生长期缩短(NEE<0的天数)、植物多样性下降、土壤含水量降低等因素密切相关.     

流域农业面源污染动态监控系统的建立和运行

提出建立农业面源污染动态监控系统的技术构思,构筑了“辽宁省农业面源污染动态监控系统”的功能及运行机制的构架,阐述了推进此动态监控系统完善的研究方案与系统实施的保证措施。     

哈尔滨市功能区噪声变化趋势分析

根据哈尔滨市四类功能区噪声监测数据,对哈尔滨市功能区噪声变化趋势进行了分析,得出1、3、4类功能区噪声Leq平均值均较稳定,2类功能区遍布广泛,声源复杂,突发噪声较频繁。     

Pollution characteristics and health risk assessment of polycyclic aromatic hydrocarbons and nitrated polycyclic aromatic hydrocarbons during heating season in Beijing

Polycyclic aromatic hydrocarbons(PAHs) and their nitrated derivatives(NPAHs) attract continuous attention due to their outstanding carcinogenicity and mutagenicity. In order to investigate the diurnal variations, sources, formation mechanism, and health risk assessment of them in heating season, particulate matter(PM) were collected in Beijing urban area from December 26, 2017 to January 17, 2018. PAHs and NPAHs in PM were quantitatively analyzed via gas chromatography-mass spectrometry(GC-MS). ...     

西安市秋冬季市区与山区微生物气溶胶组成特征及来源

为探究城市市区与山区微生物气溶胶组成特征及来源,在西安市市区(城区和郊区)及南郊山区设立3个采样点,采集细颗粒物、土壤及叶片样本.通过高通量测序法,解析不同采样点真菌与细菌群落结构,考察其时空变化特征;使用Source Track源解析技术对空气中微生物进行来源分析.结果表明,不同采样点真菌、细菌菌属差异较大,说明地理位置对空气中微生物的群落结构影响显著;冬季市区检测出较多的潜在真菌致病菌和细菌致病菌,且具有较高的相对丰度和多样性.通过源解析技术发现,在局部源叶片和土壤中,叶片表面微生物是空气中微生物的主要潜在源,且秋季叶片对空气中微生物的贡献率高于冬季.本研究不仅为空气中生物气溶胶的溯源研究提供了一定基础,也为深入了解大气中微生物污染特性和为我国空气环境质量评价与疾病预防提供一定的科学依据.     

Distribution and source of microplastics in China's second largest reservoir - Danjiangkou Reservoir

Fresh water microplastic pollution is of pressing concern globally, but its distribution and sources in reservoirs are poorly documented. Danjiangkou Reservoir is the second largest reservoir in China and is divided into the Han Reservoir and Dan Reservoir. In this work, microplastic abundances and morphological characteristics of the reservoir were investigated. The microplastic abundance of 15 main tributaries of the reservoir was also measured. The vertical distribution (in water column and sediment), horizontal distribution (in Han Reservoir and Dan Reservoir) and source of microplastics were analyzed. Microplastics accumulated in the middle layer of the reservoir, and the size and color of the microplastic particles changed from the surface to the bottom, which implies that surveys of surface water are not enough to determine the microplastic contamination for deep water reservoirs. In the surface water, the microplastic abundance in the Han Reservoir was lower than that in the Dan Reservoir (p < 0.05), but microplastic abundance did not differ significantly in the intermediate and bottom water. Tributaries were one of the main sources of microplastics for Han Reservoir but not for Dan Reservoir. Agricultural cultivation in the hydro-fluctuation belt might be an important source of microplastics in the Dan Reservoir, which should be given additional attention. The results of this study can provide valuable information for developing microplastic sampling strategies in deep water reservoirs. Further studies are recommended to investigate the process through which microplastics in the hydro-fluctuation belt enter the reservoir and the sinking behavior of microplastics in the reservoir.     

Chemical characteristics, oxidative potential, and sources of PM2.5 in wintertime in Lahore and Peshawar, Pakistan

The chemical characteristics, oxidative potential, and sources of PM_2.5 were analyzed at the urban sites of Lahore and Peshawar, Pakistan in February 2019. Carbonaceous species, water soluble ions, and metal elements were measured to investigate the chemical composition and sources of PM_2.5. The dithiothreitol (DTT) consumption rate was measured to evaluate the oxidative potential of PM_2.5. Both cities showed a high exposure risk of PM_2.5 regarding its oxidative potential (DTT_v). Carbonaceous and some of the elemental species of PM_2.5 correlated well with DTT_v in both Lahore and Peshawar. Besides, the DTT_v of PM_2.5 in Lahore showed significant positive correlation with most of the measured water soluble ions, however, ions were DTT-inactive in Peshawar. Due to the higher proportions of carbonaceous species and metal elements, Peshawar showed higher mass-normalized DTT activity of PM_2.5 compared to Lahore although the average PM_2.5 concentration in Peshawar was lower. The high concentrations of toxic metals also posed serious non-carcinogenic and carcinogenic risks to the residents of both cities. Principle component analysis coupled with multiple linear regression was applied to investigate different source contributions to PM_2.5 and its oxidative potential. Mixed sources of traffic and road dust resuspension and coal combustion, direct vehicle emission, and biomass burning and formation of secondary aerosol were identified as the major sources of PM_2.5 in both cities. The findings of this study provide important data for evaluation of the potential health risks of PM_2.5 and for formulation of efficient control strategies in major cities of Pakistan.     

Primary and secondary organic aerosol in an urban/industrial site: Sources, health implications and the role of plastic enriched waste burning

PM10 samples were collected from an urban/industrial site nearby Athens, where uncontrolled burning activities occur. PAHs, monocarboxylic, dicarboxylic, hydroxycarboxylic and aromatic acids, tracers from BVOC oxidation, biomass burning tracers and bisphenol A were determined. PAH, monocarboxylic acids, biomass burning tracers and bisphenol A were increased during autumn/winter, while BSOA tracers, dicarboxylic- and hydroxycarboxylic acids during summer. Regarding aromatic acids, different sources and formation mechanisms were indicated as benzoic, phthalic and trimellitic acids were peaked during summer whereas p-toluic, isophthalic and terephthalic were more abundant during autumn/winter. The Benzo[a]pyrene-equivalent carcinogenic power, carcinogenic and mutagenic activities were calculated showing significant (p < 0.05) increases during the colder months. Palmitic, succinic and malic acids were the most abundant monocarboxylic, dicarboxylic and hydrocarboxylic acids during the entire sampling period. Isoprene oxidation was the most significant contributor to BSOA as the isoprene-SOA compounds were two times more abundant than the pinene-SOA (13.4 ± 12.3 and 6.1 ± 2.9 ng/m³, respectively). Ozone has significant impact on the formation of many studied compounds showing significant correlations with: isoprene-SOA (r = 0.77), hydrocarboxylic acids (r = 0.69), pinene-SOA (r = 0.63),dicarboxylic acids (r = 0.58), and the sum of phthalic, benzoic and trimellitic acids (r = 0.44). PCA demonstrated five factors that could explain sources including plastic enriched waste burning (30.8%), oxidation of unsaturated fatty acids (23.0%), vehicle missions and cooking (9.2%), biomass burning (7.7%) and oxidation of VOCs (5.8%). The results highlight the significant contribution of plastic waste uncontrolled burning to the overall air quality degradation.     

Large eddy simulation of plume dispersion behind an aircraft in the take-off phase

The aim of this paper is to provide an investigation, using large eddy simulation, into plume dispersion behind an aircraft in co-flowing take-off conditions. Validation studies of the computational model were presented by Aloysius and Wrobel (Environ Model Softw 24:929–937, 2009) and a study of the flow and dispersion properties of a double-engine aircraft jet was presented by Aloysius et al. (EEC/SEE/2007/001, EUROCONTROL Experimental Centre, ), in which only the engine was modelled. In this paper, the complete geometry of a Boeing 737 is modelled and investigated. The current work represents a contribution towards a better understanding of the source dynamics behind an airplane jet engine during the take-off and landing phases. The information provided from these simulations will be useful for future improvements of existing dispersion models.