建筑材料隐含环境影响评估

我国建筑业快速发展,建筑开发使用大量的建筑材料给资源和环境带来严重负荷.以上海市为案例,运用生命周期评价方法,基于北京工业大学和Ecoinvent数据库中的建筑材料生产数据,采用ReCiPe法对上海市建筑物的材料隐含环境影响进行评估,并对未来的环境影响潜值进行预测.结果表明:在上海市居住建筑和非居住建筑所产生的各类环境影响中人类毒性、金属损耗最为突出,约占总环境影响的45%和20%;环境影响主要来源于钢筋和木材的生产,对各类环境影响贡献度分别约为47%、17%;高层居住建筑和非居住建筑中的工厂建筑物化环境影响在各自类型中所占比例最高.按现有趋势发展,2020年上海市居住建筑开发规模和环境影响潜值均将达到2014年的1.52倍,非居住建筑则可达到2014年的1.14倍.针对上海市建筑材料环境影响分析结果,为有效减轻上海市建筑物的环境影响,需重点关注钢筋、铝材、木材以及混凝土的生产,识别生产过程中污染物转移环节进而改进工序;在设计阶段考虑选择环境影响负荷低的绿色建材,如混凝土砌块、高性能混凝土等,从而降低环境影响;同时,应重点关注隐含环境负荷高的高层居住和工厂建筑类建筑,通过降低建材使用量等方案降低环境影响.      

菌渣中阿维菌素残留检测方法及其无害化工艺研究

文章建立了简单、快速的阿维菌素菌渣中阿维菌素残留量高校液相色谱检测方法以及利用水热法处理阿维菌素菌渣。采用固相萃取-高效液相色谱检测方法测定阿维菌素菌渣中阿维菌素残留量,提取剂为乙腈/水=4/1(V/V),采用HLB固相萃取柱进行净化。加标回收率90.3%~107.3%,相对标准偏差(RSD)为3.00%~5.69%,阿维2菌素标准曲线线性相关系数R~2=0.999 6,线性范围为1.0~1 000 mg/L。利用正交实验,水热法处理阿维菌素菌渣,在190℃的温度下处理2 h后,菌渣中阿维菌素残留量由991.30降至0.84 mg/kg,去除率达99.92%。处理前后的菌渣与有机肥标准作对比,除含水率外其余检测指标均达到有机肥标准要求。该项研究为阿维菌素菌渣的资源化利用提供了理论依据。     

长江口滨岸及近海水体中胶体的分布和理化性质研究

利用切向流超滤技术(CFUF)分离出长江口滨岸及近海水体中的胶体,并对其稳定性和物质组成进行了定量分析.结果表明,XP和WSK胶体的尺寸和Zeta-电位随pH的升高而减小,XP、WSK胶体的等电点分别出现在pH<2、pH=3.8;所采水样的胶体有机碳(COC,M r1×103~1μm)浓度为7.7~35.7μmol·L-1,占总溶解有机碳(DOC)的7.1%~41.7%;三维荧光光谱(3DEEM)分析发现研究区出现类色氨酸荧光峰、类紫外富里酸荧光峰和类腐殖质荧光峰;胶体态Na、Mg、K、Ca、Co、Cr、Cu、Fe、Li、Mn、Ni平均分别占溶解态的0.33%、5.7%、0.975%、1%、7.2%、7%、11.9%、15.7%、5.5%、10.5%、11.3%.Co、Cr、Cu、Fe、Li、Mn、Ni与COC的结合能力大于Na、Mg、K、Ca.相关分析表明,胶体的尺寸、DOC、真溶解有机碳(UOC)与盐度呈负相关,COC与盐度无线性关系,胶体态痕量金属(Co、Cr、Cu、Fe、Li、Mn、Ni)总浓度与COC呈线性关系.     

Electrochemical treatment of olive mill wastewater: Treatment extent and effluent phenolic compounds monitoring using some uncommon analytical tools

Problems related with industrials effluents can be divided in two parts: (1) their toxicity associated to their chemical content which should be removed before discharging the wastewater into the receptor media; (2) and the second part is linked to the difficulties of pollution characterisation and monitoring caused by the complexity of these matrixes. This investigation deals with these two aspects, an electrochemical treatment method of an olive mill wastewater (OMW) under platinized expanded titanium electrodes using a modified Grignard reactor for toxicity removal as well as the exploration of the use of some specific analytical tools to monitor effluent phenolic compounds elimination. The results showed that electrochemical oxidation is able to remove/mitigate the OMW pollution. Indeed, 87% of OMW color was removed and all aromatic compounds were disappeared from the solution by anodic oxidation. Moreover, 55% of the chemical oxygen demand (COD) and the total organic carbon (TOC) were reduced. On the other hand, UV- Visible spectrophotometry, Gaz chromatography/mass spectrometry, cyclic voltammetry and 13 C Nuclear Magnetic Resonance (NMR) showed that the used treatment seems efficaciously to eliminate phenolic compounds from OMW. It was concluded that electrochemical oxidation in a modified Grignard reactor is a promising process for the destruction of all phenolic compounds present in OMW. Among the monitoring analytical tools applied, cyclic voltammetry and 13 C NMR are among the techniques that are introduced for the first time to control the advancement of the OMW treatment and gave a close insight on polyphenols disappearance.     

标准加入法测定生态水泥中的重金属

基于实验提出用标准加入法测定生态水泥中的重金属含量。包括微波辅助酸消解水泥试样,分离干扰元素,分取试液加入一定量待测元素标液,AAS测定等程序。文章选择具代表性的生态水泥,经试验确定了有关实验参数,通过建立标准曲线明确了实验条件下的线性范围、检出限。重复性试验表明各元素相对标准偏差在2.3%～9.3%之间。采用基底相似的土壤标样按标准加入法作回收试验,得到回收率在90%～96%之间。     

顶空／气相色谱-质谱法测定水中四乙基铅

建立了顶空,气相色谱-质谱法测定水中四乙基铅方法。水样中的四乙基铅直接顶空进样,质谱分析。实验结果表明,在0．10-5．00μg几范围内线性关系良好,方法检出限为0．02μg/L,得到了良好的分离效果与较高的灵敏度和精密度。方法简便快捷,能达到《生活饮用水卫生规范》（GB/T5750．8—2006）中规定的要求。     

Shear cutting and counter shear cutting of sandwich materials

New lightweight sandwich materials challenge existing forming processes as well as following process steps. As such the manufacturing potential of shear cutting has to be evaluated. Two cutting methods are compared. Method commonly used is shear-cutting within one stroke engaged, the other one is known as counter-shear cutting, which uses two strokes.The challenges of cutting sandwich materials are variation of hole diameter within the different layers, fraying of the textiles, deformation of the hole contour and burr formation. These effects occur in conventional shear cutting as the intermediate layer and the lower sheet metal are cut by the scrap of the upper sheet instead of the cutting punch.The following methodology included shear cutting with closed cutting edge i.e. cutting of holes into five different sandwich materials. The sandwiches exemplarily represent multiple kinds of possible material designs. For instance, aluminum and steel face sheets, different thicknesses of intermediate layers and different intermediate layers materials such as integrated textile fibers have been used. Adequate cutting parameters such as die clearance and the use of a blank holder have been determined. To achieve good results a stiff machine design with good guidance and precise control of punch position was crucial.Observations of conventional shear cutting revealed the need of small cutting clearance of 4%. High burnish area is possible for the upper face sheet due to the superimposed force by the lower face sheet. The major conclusion depicted that high cutting quality of sandwich materials requires counter shear cutting. Hence, the roll-over of the lower sheet facing the intermediate layer, the burnish area at the lower sheet, good cutting quality of the fibers improve significantly and burr formation is avoided completely. Summarized this paper provides cutting parameters for sandwich materials based on experimental work.     

浅议吉林省《糠醛工业污染物控制要求》

文章从战略的高度出发,为吉林省《糠醛工业污染物控制要求》中水污染物排放要求的进一步完善提出合理化建议。作者认为,排放标准的更新,水质监测项目的添加,以及对相关储水设施提出具体的技术要求,是促进糠醛工业持续、稳定、健康发展,推进环境污染防治工作的关键。     

镇江市城区降雨径流水质分析

雨水径流污染是城市面源污染的主要形式,通过对镇江市城区2011年10场降雨径流水质监测,分析了镇江市城区降雨径流水质。结果表明,镇江市城区降雨径流存在一定污染,直接排入城市地表水体会对其造成污染。其主要污染指标为COD、BOD5、NH3-N、TP和总悬浮颗粒物,重金属含量较低,基本不存在重金属污染。各种不同类型雨水径流水质污染程度差异较大,天然降雨、屋面径流,大市口路面径流水质相对较好,基本能达到Ⅲ或Ⅳ类水体的水质标准;泵站、排口径流、河道径流污染较重,大多属于超Ⅴ类水体;南门大街路面径流污染最为严重,部分水质指标接近工业废水。     

平朔安太堡矿区复垦地土壤微生物与土壤性质关系的研究

调查安太堡大型露天矿区西排土场植被恢复与土壤微生物的关系.结果表明,土壤中微生物量与土壤中的水分、速效磷、土壤有机质、有效性氮和海拔高度有明显的关系.麦地、林地、草地的土壤中呈现出:细菌》放线菌》固氮菌》霉菌;撂荒地呈现为:细菌》放线菌》霉菌》固氮菌;裸地呈现出:细菌》放线菌》霉菌.细菌、放线菌和霉菌呈现麦地最高,裸地最低,固氮菌为林地高于其他样地.在撂荒地和裸地中,细菌占微生物总量的一半以上.麦地、林地、草地、撂荒地中的各种菌、速效磷、土壤有机质、有效性氮含量明显高于裸地中的含量.微生物总量和样地的海拔、样地土壤的含水率有明显的关系,土壤中的含水量直接影响微生物总量.微生物总量与速效磷含量和有机质含量成正比,有机质含量与有效性氮含量成正比.细菌与海拔呈极显著负相关,与其他几种养分指标呈极显著正相关,放线菌与海拔和速效磷呈极显著相关,与其他指标相关性不显著,固氮菌与几种养分指标相关性均不显著.按全国土壤养分划分标准,安太堡大型露天矿区复垦地等级不高,还需要用科学的方法加快复垦区土壤的恢复.