植筋在房屋加固、改造中的应用实例研究

植筋技术可使钢筋与混凝土之间产生牢靠的粘结作用，能达到类似于预埋钢筋的效果。在武汉兆富大厦地下室结构改造工程中应用，效果很好。     

滑坡治理抗滑桩内力监测方法与数据处理

介绍了钢筋计监测抗滑桩内力的基本原理,给出了根据钢筋计监测结果计算抗滑桩弯矩的方法,且利用单筋矩形截面受弯模型得到的抗滑桩内力曲线与理论曲线吻合较好;通过对两个监测实例进行分析,表明抗滑桩内力监测能很好地反映抗滑桩的工作状态及治理后滑坡的稳定性。     

Optimization and evaluation of steel industry’s water-use system

In the steel industry, water is mainly used for cleaning and cooling. All these different tasks produce wastewaters that differ not only in quantity but also in quality. This study integrates all water-use processes into a system and applies substance flow analysis to build up an optimization model and an evaluation index system for the water-use network of a steel enterprise. Based on the index system, water-use status of large steel enterprises in China is evaluated and problems in the present water consumption are identified. A contrast analysis between present and optimized water-use is conducted, which then serves as the basis for the network optimization and countermeasure articulation. Finally, an analysis has been made on one of the most important and largest steel enterprise in China. The results indicate that after optimization fresh water consumption can be decreased by 11.1% and wastewater discharge can be decreased by 94.54%.     

Plastic buckling,wrinkling and collapse behaviour of dented X80 steel line pipes under axial compression

High strength steel pipes have found increasing applications in deep high pressure offshore oil/gas lines. Damages in the form of dent are among common causes of pipeline failure. Indentation, plastic buckling and residual strength of dented normal grade steel pipes under bending, axial and combined loading have previously been addressed by a number of researchers. The plastic buckling and collapse of dented high grades steel line pipes, however, have received less previous attentions.In the current study an experimental model testing was used to evaluate the residual strength of dented X80 steel pipes under monotonic axial compression. The tubular specimens were first laterally dented by an indentor while resting on a saddle shape support. The specimens were then examined under axial compression to study the dent effects on their collapse behaviour. Numerical simulations were also used to analyse the effect of the indentor ratio, shape and alignment on the residual strength of dented steel tubes under monotonic axial compression. The results from the current study on high strength steels were also compared with semi-empirical equations available in the literature for low strength steels. It was found that these equations provide reasonable predictions for the axial residual capacity of the high strength steel pipes when the dent depths are small. With deep dents, however, they considerably underestimate the axial residual capacity of the high strength steel pipes.     

Steel slag carbonation in a flow-through reactor system: The role of fluid-flux

Steel production is currently the largest industrial source of atmospheric CO₂. As annual steel production continues to grow, the need for effective methods of reducing its carbon footprint increases correspondingly. The carbonation of the calcium-bearing phases in steel slag generated during basic oxygen furnace (BOF) steel production, in particular its major constituent, larnite {Ca₂SiO₄}, which is a structural analogue of olivine {(MgFe)₂SiO₄}, the main mineral subjected to natural carbonation in peridotites, offers the potential to offset some of these emissions. However, the controls on the nature and efficiency of steel slag carbonation are yet to be completely understood. Experiments were conducted exposing steel slag grains to a CO₂-H₂O mixture in both batch and flow-through reactors to investigate the impact of temperature, fluid flux, and reaction gradient on the dissolution and carbonation of steel slag. The results of these experiments show that dissolution and carbonation of BOF steel slag are more efficient in a flow-through reactor than in the batch reactors used in most previous studies. Moreover, they show that fluid flux needs to be optimized in addition to grain size, pressure, and temperature, in order to maximize the efficiency of carbonation. Based on these results, a two-stage reactor consisting of a high and a low fluid-flux chamber is proposed for CO₂ sequestration by steel slag carbonation, allowing dissolution of the slag and precipitation of calcium carbonate to occur within a single flow-through system.     

Seismic risk assessment of liquid overtopping in a steel storage tank equipped with a single deck floating roof

Major earthquakes have demonstrated that Natech events can be triggered by liquid overtopping in liquid storage tanks equipped with floating roofs. Thus, research on the dynamic behaviour of steel storage tanks with floating roofs is still required. In this paper, the seismic risk against liquid overtopping in a real steel storage tank with a floating roof was analysed using a simplified model that was validated by a refined finite element model based on the arbitrary Lagrangian-Eulerian approach. The simplified model utilizes the Lagrangian of a floating roof-fluid system and is capable of providing a response history of the floating roof. It was demonstrated that it could predict the maximum vertical displacement very accurately, while some differences were observed in the response history of vertical displacement. The computational time for a single response history analysis based on the simplified model amounted to a few minutes, which is significantly less demanding compared to hours required for response history analysis in the case of the refined FE model. The simplified model is thus appropriate for the seismic fragility analysis considering the overtopping limit state. It is shown that the fragility curves are significantly affected by the liquid filling level. The risk for liquid overtopping is quite high in the case of a full tank. However, by considering the variation of filling level during the year, the overtopping risk was observed reduced by approximately 30%. Alternatively, the approximate fragility analysis for the liquid overtopping can be performed by utilizing the Eurocode formula for the vertical displacement of liquid. This approach is straightforward, but the formula does not account for the higher mode effects, which may result in overestimated seismic intensity causing overtopping, as discussed in the paper.     

碳化砂浆轴向冲击动态力学特性与破碎形态分析

为保证长期使用砂浆在动载作用下的安全性,采用非金属超声波检测仪测量不同碳化龄期试件的纵波波速,引入碳化增强因子η表征碳化深度大小,并利用直径50 mm变截面分离式Hopkinson 压杆试验装置开展不同碳化龄期砂浆冲击动态压缩试验,研究碳化后砂浆的动态力学特性与破碎形态,分析砂浆动态应力—应变曲线、峰值应力和破碎形态随碳化龄期变化规律。结果表明:随着碳化龄期的增长,试件波速呈增大趋势,碳化增强因子η增大,碳化深度增加;碳化龄期相同时,砂浆的动态峰值应力、峰值应变都随着冲击气压的增大而增大;冲击气压相同时,砂浆的动态峰值应力随着碳化龄期的增长而增加;试件的破坏形态主要呈现为压碎破坏与劈裂拉伸。     

钢渣/焦炭吸附-微波降解法处理阳离子染料废水

以结晶紫溶液模拟阳离子染料废水,研究了钢渣对染料的吸附性能及其影响因素.结果表明,在碱性条件下,钢渣对结晶紫不仅吸附速率快,而且吸附容量大.利用钢渣对染料的吸附特性和焦炭吸收微波产生高温的性能,提出了以钢渣/焦炭吸附-微波降解处理阳离子染料废水的新方法.该方法简单有效,成本低廉,具有良好的应用前景.     

The role of a steel plant in north-west Italy to the local air concentrations of PCDD/Fs

Polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) are ubiquitous contaminants, mainly released into the environment during combustion processes (point sources), but also from other sources (traffic, uncontrolled combustion).This study aims at investigating the contribution of a steel plant in NW Italy (700 000 tons of steel year⁻¹) to the air concentrations of PCDDs/PCDFs at local level, through the analysis of measured, modelled and literature data. The study was carried out in an area of 600 km², using air quality data measured by the institutional monitoring network, data obtained from AERMOD simulations and literature data.The measured air concentrations were consistent with literature values for similar areas, and both the homologue profiles and PCA analyses showed a clear distinction between the monitoring stations and the source profiles.All the previous results were confirmed by the air dispersion model (AERMOD), that predicted PCDD/F air concentrations due to the steel plant from four to two orders of magnitude lower than those measured in the monitoring stations, highlighting the presence of other sources.This study outlines the limited influence of the source in the local PCDD/F air concentrations and at the same time the usefulness of a joint analysis of measured, literature and calculated data to correctly evaluate the role of a source to the local pollution. The study also highlights the usefulness of AERMOD as a complementary tool to define the correct placement of monitoring stations and to locate those areas expected to have the highest air concentrations deriving from a source.     

Estimating the contribution of industrial facilities to annual PM10 concentrations at industrially influenced sites

If measures to reduce the industrial discharge of PM10 shall be planned with high accuracy, a first step must be to estimate the contribution of single industrial facilities to the overall PM10 burden as accurately as possible. In northern Duisburg as an example, an area where iron and steel producing industry is concentrated, PM10 was measured at 4 sampling sites very close to an industrial complex of blast furnaces, a sinter plant, oxygen steel works and a coke oven plant for 9 months in 2006. At two sites metals in PM10 were determined. The results, together with analytical data of urban background sites in the region and data of wind direction and wind speed were used for an estimation of the contribution of single plants to the PM10 burden. A careful analysis of the data showed, that the data of PM10, calcium, iron and zinc measured at two sites close to the industrial area and information about the urban background aerosol were sufficient to calculate the PM10 contribution of the main single plants. The data could be compared with those of modelling.