Spatial distribution of pollution in an urban stormwater infiltration basin

Infiltration basins are frequently used for stormwater drainage. Because stormwater is polluted in highly toxic compounds, assessment of pollution retention by infiltration basins is necessary. Indeed, if basins are not effective in trapping pollution, deep soil and groundwater may be contaminated. This study's objective is to investigate soil pollution in infiltration basins: spatial distribution of soil pollution, optimisation of the number of soil samples and a contamination indicator are presented. It is part of a global project on long-term impact of stormwater infiltration on groundwater. Soil sampling was done on a basin in suburban Lyon (France). Samples were collected at different depths and analysed for nutrients, heavy metals, hydrocarbons and grain size. Pollutant concentrations decrease rapidly with depth while pH, mineralisation and grain size increase. Sustainable metal concentrations are reached at a 30-cm depth, even after 14 years of operation; hydrocarbon pollution is deeper. Principal component analysis shows how pollutants affect each level. The topsoil is different from other levels. Three specifically located points are enough to estimate the mass of pollution trapped by the basin with a 26% error. The proposed contamination indicator is calculated using either average level concentrations or maximum level concentrations. In both cases, the topsoil layer appears polluted but evaluation of lower levels is dependent on the choice of input concentrations.     

建筑小区雨水径流的土壤渗透净化

讨论了建筑小区雨水径流的污染性、土壤渗透对小区径流的净化作用及土壤的渗透能力，提出了建筑小区雨水径流土壤渗透的工程实施方案。     

Impact of density of coating agent on antibacterial activity of silver nanoparticle impregnated plasma treated activated carbon

To use stabilized nanoparticles(NPs) in water as disinfectants over a very long period, the amount of coating agent(for NP stabilization) needs to be optimized. To this end, silver nanoparticles(Ag-NPs) with two different coating densities of tri-sodium citrate(12.05 and46.17 molecules/nm~2, respectively), yet of very similar particle size(29 and 27 nm, respectively)were synthesized. Both sets of citrate capped NPs were then separately impregnated on plasma treated activated carbon(AC), with similar Ag loading of 0.8 and 0.82 wt.%, respectively. On passing contaminated water(containing 10~4 CFU Escherichia coli/m L of water) through a continuous flow-column packed with Ag/AC, zero cell concentration was achieved in 22 and 39 min, with Ag-NPs(impregnated on AC, named as Ag/AC) having lower and higher coating density, respectively. Therefore, even on ensuring similar Ag-NP size and loading, there is a significant difference in antibacterial performance based on citrate coating density in Ag/AC.This is observed in lower coating density case, due to both:(i) higher Ag~+ ion release from Ag-NP and(ii) stronger binding of individual Ag-NPs on AC. The latter ensures that, Ag-NP does not detach from the AC surface for a long duration. TGA-DSC shows that Ag-NPs with a low coating density bind to AC with 4.55 times higher adsorption energy, compared to Ag/AC with a high coating density, implying stronger binding. Therefore, coating density is an important parameter for achieving higher antibacterial efficacy, translating into a faster decontamination rate in experiments, over a long period of flow-column operation.     

过滤式碳纤维电极消毒效果比较与机理研究

过滤式电极消毒作为一种安全、高效的新型消毒技术备受关注,然而目前使用的电极材料比较单一,且稳定性和高效性难以兼备,制约了该技术的设备化发展.本文采用过滤式消毒方式,考察了几种高孔隙率的导电碳纤维毡的消毒效果.结果表明,碳纤维毡电极具有优异的消毒能力,活性碳纤维电极可在几伏的电压下使细菌死亡,与传统电化学消毒相比,电压降低了1~2个数量级.其中A-PCF(聚丙烯腈基活性碳纤维)电极在外接电压2 V,水力停留时间2 s时即可对大肠杆菌菌液实现6.5log的去除.当外接电压≤2 V时,流出物中未检测到氯,pH保持不变,排除了电化学产物的影响.A-PCF可作为过滤式电极消毒的优选电极材料.     

饮用水中卤乙腈(HANs)类消毒副产物研究现状与进展

对国内外饮用水中HANs类消毒副产物检测方法、生成的影响因素及毒理学试验的研究进展与现状进行了调查和分析,探讨了其存在于饮用水中可能导致的人体健康危害。结果表明,饮用水中HANs类消毒副产物普遍存在,而且HANs消毒副产物比常规消毒副产物(三卤甲烷、卤乙酸等)具有更强的三致效应、生殖发育毒性、基因和细胞毒性,通过饮水摄入人体,对健康造成潜在危害。HANs的检测、人体健康风险评价和控制是今后的研究重点。     

加氯消毒过程中纯细菌物质生成消毒副产物研究

按照UFC方法对水体中3种常见细菌Acinetobacter junii、Staphylococcussciuri和Escherichia coli进行纯细菌加氯消毒处理,同时考察水中溴离子对纯细菌物质生成DBPs的影响.结果表明,3种细菌均为DBPs前体物,加氯消毒生成的DBPs除水合三氯乙醛(CHD)外,生成的三卤甲烷(THMs)物质主要为氯仿(TCM),卤乙腈(HANs)物质主要为二氯乙腈(DCAN).氯仿的生成量与细菌物质TOC浓度无明显关系,但HANs和CHD生成量均随细菌TOC浓度增大而增加.其中革兰氏阳性细菌Staphylococcus sciuri生成的DCAN和CHD比革兰氏阴性细菌Acinetobacter junii和Escherichia coli生成的要高,说明细胞壁的化学组分可能是DCAN和CHD生成的影响因素之一.Escherichia coli细菌反应液中溴离子(Br-)存在时,除生成CHD、TCM及DCAN外,THMs和HANs中的溴代种类CHBr3随Br-增多而持续增加,相反TCM持续减少.当Br-浓度为4mg.L-1时,TBM浓度增至最高127.9μg.L-1;HANs和CHD生成量随Br-浓度增加先有所增加,随后持续降低至低于检测限;Br离子存在时THMs为主要DBPs种类.     

紫外线消毒后微生物的光复活特性及其评价方法

随着紫外线消毒技术应用的日益广泛,污水紫外线消毒后微生物的光复活特性值得关注。文章综述了光复活的机理、具有光复活能力的微生物种类、影响光复活的因素以及光复活的评价方式等,以期为系统研究光复活提供参考。具有复活能力的微生物种类较多,主要和体内所含光复活酶相关。影响光复活的因素涉及微生物、污水特性、紫外线系统及光复活条件四方面。评价光复活的方式至今没有统一标准。光复活及其对污水消毒的影响有待进一步深入研究。     

两点短时游离氯后转氯胺的顺序氯化消毒工艺研究

基于顺序氯化消毒工艺的原理,采用两点短时游离氯后转氯胺的两点顺序氯化消毒工艺,即在过滤和清水池前的两点分别加氯,并在清水池加氯后立即加氨转化为氯胺消毒的工艺,该工艺在常规处理工艺的给水厂进行了消毒试验.结果表明,加氯点的适当提前,不仅有利于控制消毒副产物的生成量,而且有效抑制了滤池中的生物膜滋生.两点顺序氯化消毒工艺中生成的卤代消毒副产物比相同条件下一次性加入等量的氯消毒剂的消毒方法产生的三卤甲烷(THMs)平均减少了51.6％,卤乙酸(HAAs)平均减少了46.7％.细菌学指标HPC的结果也显示出了该工艺在保障水质的微生物安全方面的优势.     

污水处理中紫外消毒效果的研究

紫外消毒技术相对于氯化法消毒,能够快速、有效地去除污水中粪大肠杆菌,操作简单方面,无副产物生成,对周围环境和人员安全可靠,在中国许多污水处理厂都已取代氯化法消毒并广泛应用。阐述了紫外消毒和微生物光复活现象的原理,并通过大量试验来研究紫外消毒技术去除粪大肠杆菌的效果,及经紫外消毒后出水中粪大肠杆菌光复活现象对紫外消毒效果的影响,提出可采用出水避光排放、增加紫外照射剂量、延长照射时间等方法来控制微生物光复活现象。     

电化学消毒法对水中大肠杆菌的灭活特性

本研究通过电化学消毒小试装置,系统考察了电极板材料、极板间距、p H、水温、Na Cl浓度等因素对水中大肠杆菌CGMCC 1.3373灭活效果的影响,并进一步考察了电化学消毒对抗生素抗性大肠杆菌CGMCC 1.1595的灭活效果及其抗性变化.结果发现,在相同的电化学消毒条件下,阳极采用钌铱涂层的钛电极板的灭活效果显著优于铅涂层和铱钽涂层电极板,并且极板间距为50 mm时灭活率最高.进一步研究表明,电化学消毒法对大肠杆菌的灭活率随水的p H升高而降低,随水温和Na Cl浓度升高而升高.在相同消毒条件下,电化学法对四环素抗性大肠杆菌的灭活率显著低于普通大肠杆菌.消毒后存活的抗性菌对四环素、青霉素、氯霉素的抗性,随消毒时间延长呈现先下降后上升的规律.