水中天然有机物的分类特性及其卤代活性

利用XAD树脂对原水中的天然有机物进行富集分类 ,将其分为腐植酸、富里酸、亲水酸和其它亲水物质等 4种有机组分 .考察了原水中各有机组分的分布及其在加氯消毒过程中的三卤甲烷生成量、生成速度及耗氯量情况 .研究结果表明 ,原水中的主要成分是富里酸 ,占有机物总量的50.7% ,其它3种成分所占比例相对较小 ;原水具有较高的三卤甲烷生成能力 ,富里酸是生成三卤甲烷的主要有机组分 ;对各有机组分卤代活性的研究表明 ,腐植酸、富里酸和亲水酸具有较高的卤代活性 ,其它亲水物质的卤代活性较低 ;从各有机组分的三卤甲烷生成速度及与氯反应速度来看 ,腐植酸、富里酸及亲水酸具有较快的三卤甲烷生成速度 ,与氯的反应速度也较快 ,而其它亲水物质的三卤甲烷生成速度及与氯的反应速度均较低 .     

臭氧耦合陶瓷膜过滤对膜性能及出水消毒副产物的影响

利用臭氧（O₃）-陶瓷膜过滤（CMF）处理常规工艺出水,研究了不同O₃-CMF耦合方式对膜性能和消毒副产物（DBPs）的影响.结果表明,与单独CMF相比,异位O₃-CMF和原位O₃-CMF均可以有效缓解膜污染,原位O₃-CMF控制效果最佳.异位O₃-CMF对进水（常规工艺出水） DOC去除率（26.25%）略高于原位O₃-CMF（22.31%）,但是其SUVA去除率（83.91%）明显低于原位O₃-CMF（93.10%）.羟基自由基（·OH）生成特征表明原位O₃-CMF可促进O₃产生更多的·OH.在O₃、·OH氧化和陶瓷膜截留协同作用下,异位O₃-CMF和原位O₃-CMF出水中总荧光响应强度和相对分子质量大于0.3×10³,有机物含量降低,进而使得出水中含碳消毒副产物（C-DBPs）生成量分别降低了21.86%和32.35%,含氮消毒副产物（N-DBPs）生成量分别降低了16.16%和19.13%.但O₃和·OH氧化后生成的小分子有机物因难以被CM截留导致其在出水中含量增加,进而增加了卤代酮（HKs）、水合氯醛（CH）和三卤硝基甲烷（THNMs）的产生.本研究对于不同O₃-CMF方式下O₃与CM的协同机制的探讨,改善膜性能和提升DBPs前体物的去除具有一定指导意义.     

Comparison of inclined plate sedimentation and dissolved air flotation for the minimisation of subsequent nitrogenous disinfection by-product formation

The formation of disinfection by-products (DBPs), including both nitrogenous disinfection by-products (N-DBPs) and carbonaceous disinfection by-products (C-DBPs), was investigated upon chlorination of water samples following two treatment processes: (i) coagulation-inclined plate sedimentation (IPS)-filtration and (ii) coagulation-dissolved air flotation (DAF)-filtration. The removal of algae, dissolved organic nitrogen (DON), dissolved organic carbon (DOC) and UV₂₅₄ by coagulation-DAF-filtration was superior to coagulation-IPS-filtration. On average, 53%, 53% and 31% of DOC, DON and UV₂₅₄ were removed by coagulation-DAF-filtration process, which were higher than 47%, 31% and 27% of that by coagulation-IPS-filtration process. Additionally, coagulation-IPS-filtration performed less well at removing the low molecular weight organics than coagulation-DAF-filtration process. The concentrations of chloroform, dichloroacetamide (DCAcAm) and dichloroacetonitrile (DCAN) formed during chlorination after coagulation-DAF-filtration reached their maximum values of 13, 1.5 and 4.7 μg L⁻¹, respectively, and were lower than those after coagulation-IPS-filtration with the maximum detected levels of 17, 2.9 and 6.3 μg L⁻¹. However, the trichloronitromethane (TCNM) concentration after the two processes was similar, suggesting that DON may have less of a contribution to TCNM formation than DCAcAm and DCAN.     

Escherichia coli inactivation by pressurized CO2 treatment methods at room temperature: Critical issues

This study aims to increase the inactivation efficiency of CO_2 against Escherichia coli under mild conditions to facilitate the application of pressurized CO_2 technology in water disinfection. Based on an aerating-cycling apparatus, three different treatment methods(continuous aeration, continuous reflux, and simultaneous aeration and reflux) were compared for the same temperature, pressure(0.3–0.7 MPa), initial concentration, and exposure time(25 min). The simultaneous aeration and reflux treatment(combined method) was shown to be the best method under optimum conditions, which were determined to be 0.7 MPa, room temperature, and an exposure time of 10 min. This treatment achieved 5.1-log reduction after 25 min of treatment at the pressure of 0.3 MPa and 5.73-log reduction after 10 min at 0.7 MPa. Log reductions of 4.4 and 5.0 occurred at the end of continuous aeration and continuous reflux treatments at 0.7 MPa, respectively.Scanning electron microscopy(SEM) images suggested that cells were ruptured after the simultaneous aeration and reflux treatment and the continuous reflux treatment. The increase of the solubilization rate of CO_2 due to intense hydraulic conditions led to a rapid inactivation effect. It was found that the reduction of intracellular p H caused by CO_2 led to a more lethal bactericidal effect.     

Method to assess component contribution to toxicity of complex mixtures: Assessment of puberty acquisition in rats exposed to disinfection byproducts

A method based on regression modeling was developed to discern the contribution of component chemicals to the toxicity of highly complex, environmentally realistic mixtures of disinfection byproducts(DBPs). Chemical disinfection of drinking water forms DBP mixtures.Because of concerns about possible reproductive and developmental toxicity, a whole mixture(WM) of DBPs produced by chlorination of a water concentrate was administered as drinking water to Sprague–Dawley(S–D) rats in a multigenerational study. Age of puberty acquisition,i.e., preputial separation(PPS) and vaginal opening(VO), was examined in male and female offspring, respectively. When compared to controls, a slight, but statistically significant delay in puberty acquisition was observed in females but not in males. WM-induced differences in the age at puberty acquisition were compared to those reported in S–D rats administered either a defined mixture(DM) of nine regulated DBPs or individual DBPs. Regression models were developed using individual animal data on age at PPS or VO from the DM study. Puberty acquisition data reported in the WM and individual DBP studies were then compared with the DM models. The delay in puberty acquisition observed in the WM-treated female rats could not be distinguished from delays predicted by the DM regression model, suggesting that the nine regulated DBPs in the DM might account for much of the delay observed in the WM. This method is applicable to mixtures of other types of chemicals and other endpoints.     

溶解性有机氮乙酰胺氯化生成饮用水THMs的影响因素研究

氯化消毒可以有效杀灭细菌,但同时会产生危害人体健康的消毒副产物(DBPs).溶解性有机氮(DON)是DBPs的重要前体物,为考察DON对THMs的影响,首次选取乙酰胺(AcAm)作为前体物DON的代表物质,采用Plackett-Burman和Box-Behnken方法设计试验,考察了AcAm初始浓度、加氯量、pH、温度、溴离子浓度和反应时间等因素对三卤甲烷(THMs)生成的影响.结果表明,在AcAm生成THMs的过程中,AcAm初始浓度、pH和反应温度3个因素的影响程度较小,溴离子、有效氯和反应时间3因素的影响较大,其中溴离子的影响最为显著.溴离子浓度一定时,改变有效氯的含量,生成的THMs总量变化不大,溴离子对THMs的生成有一定的催化作用,控制溴离子的浓度是减少AcAm生成THMs的有效措施.在有效氯为8.77 mg/Ｌ、溴离子为0.77 mg/Ｌ及接触时间为6.20 h的条件下,THMs存在最大生成量为45.82 μg/L.随着反应时间的推移,溴分配系数n呈上升趋势,控制消毒反应时间,是减少THMs致癌风险的有效方法.同时探讨了AcAm生成THMs的反应路径,表述了溴离子的催化作用机制.     

二氧化氯消毒前后污水毒性的变化及消毒条件的影响

采用发光细菌试验和umu试验,分别考察了二氧化氯投加量和反应时间对污水二氧化氯消毒后急性毒性和遗传毒性变化的影响.结果表明,随着二氧化氯消毒剂投加量的增加,消毒后水样的急性毒性不断增大,但遗传毒性逐渐减小后趋于稳定.随着反应时间的延长,二氧化氯的消耗量不断增大,消毒后水样的急性毒性先增大后减小,遗传毒性逐渐减小后趋于稳定.由于消毒条件对污水急性毒性和遗传毒性有着不同的影响,说明污水中产生急性毒性和产生遗传毒性的物质不同,对于某一种污水,通过控制消毒条件可以使消毒后污水的急性毒性和遗传毒性都较低.     

高锰酸盐复合药剂预氧化对摇蚊幼虫DBPsFP的去除控制研究

以花翅摇蚊幼虫为试验对象,研究高锰酸盐复合药剂预氧化对摇蚊幼虫代谢产物在氯化消毒过程中消毒副产物前体物的去除控制.研究表明:在p H由5升高到9时,三氯乙酸(TCAA)与二氯乙酸(DCAA)的浓度呈逐渐减少趋势;p H由5升高到7时,三氯甲烷(TCM)和三氯乙腈(TCAN)的浓度减幅最大,1,1-二氯丙酮(1,1-DCP)和1,1,1-三氯丙酮(1,1,1-TCP)则在p H为8时浓度达到最低值;随着药剂投加量的增加,TCM呈现出持续稳定增长趋势,DCAA呈总体下降趋势,而TCAN、1,1-DCP、1,1,1-TCP和TCAA则先增加后减少,高锰酸盐的投加量为3mg·L-1时,消毒副产物去除效果显著;延长预反应时间,TCM呈总体上升趋势,1,1-DCP、DCAA、TCAA呈下降趋势,TCAN、1,1,1-TCP呈先增加后减少的趋势,综合考虑最佳预氧化时间为30 min;投加混凝剂能够有效控制消毒副产物前体物的生成,随着混凝剂的不断增加,TCM、1,1,1-TCP呈先增加后减少的趋势,TCAN、1,1-DCP、DCAA、TCAA浓度则逐渐降低,在投量为40 mg·L-1时,达到最低值.     

紫外灭活水中3种致病性曲霉的效能及其光复活控制

以饮用水中常见的3种曲霉(黑曲霉Aspergillus niger、黄曲霉Aspergillus flavus、烟曲霉Asperillus fumigatus)为研究对象,紫外线作为消毒手段,研究其灭活效能与机制及紫外控制曲霉光复活的效果.结果表明,由于孢子尺寸、孢子色素、疏水性的不同,灭活结果存在差异,3种曲霉孢子对...     

氯化消毒副产物2,2,4-三氯-5-甲氧基-环戊-4-烯-1,3-二酮的合成及结构确认

以七氯丙烷为原料,合成了氯化消毒副产物--2,2,4-三氯-5-甲氧基-环戊-4-烯-1,3-二酮(TCMCD),总收率为13%,产品纯度在98%以上.通过质谱、核磁共振、红外光谱等对TCMCD进行表征,进一步确认了副产物的结构.