黄菖蒲和狭叶香蒲根系对氮磷的吸收动力学

采用改进的常规耗竭法,研究了黄菖蒲（Iris pseudacorus L.）和狭叶香蒲（Typha angustifolia L.）根系对NH₄⁺、NO₃^-和H₂PO₄^-的吸收特征及差异。结果表明,这2种植物根系对NH₄⁺、NO₃^-和H₂PO₄^-的吸收动力学特征均可采用Michaelis-Menten方程描述。2种植物根系对NH₄⁺、NO₃^-和H₂PO₄^-的亲和力（Km）和最大吸收速率（Vmax）有显著差异。吸收H₂PO₄^-时,黄菖蒲根系具有较高的Vmax值和较低的Km值,说明黄菖蒲具有嗜磷特性,并能够适应广范围浓度的H₂PO₄^-环境,适宜用于污染水体磷的去除;吸收NO₃^-时,狭叶香蒲根系具有较高的Vmax值和较低的Km值,表明狭叶香蒲可用于广范围浓度NO₃^-污染的水体修复;吸收NH₄⁺时,黄菖蒲根系具有较低的Vmax值和Km值,而狭叶香蒲根系具有较高的Vmax值和Km值,说明黄菖蒲适宜用于NH₄⁺污染较轻水体的修复,而在NH₄⁺污染较重水体中宜选用狭叶香蒲作为先锋植物。     

水泥窑协同处置过程中Pb、Cd的挥发特性

对铅、镉2种重金属的氧化物开展了热重实验、熟料煅烧以及熟料消解实验,以重金属的挥发率为主要指标,研究了水泥窑协同处置过程中铅、镉在等温条件下随时间的挥发特性。结果表明,2种重金属的挥发率均是随温度的升高,时间的增加而增大。Pb的挥发率为96%,Cd的挥发率达到98%,根据等温动力学及阿累尼乌斯方程,对Pb,Cd的挥发率随时间变化的规律进行动力学模拟,得到较好的线性拟合效果,其中,Pb挥发反应的表观活化能E为88.73 kJ/mol,Cd挥发反应可以分2个部分：1 200℃以下的表观活化能E为61 kJ/mol;1 250℃以上的表观活化能E为184.6 kJ/mol。     

CNTs/TiO2/CS光降解苯的动力学

综合光催化氧化苯的动力学过程、光辐射场模型和质量守恒定律,采用平板型反应器建立了碳纳米管/二氧化钛/壳聚糖(CNTs/TiO2/CS)催化薄膜光催化氧化气相苯的数学模型;该模型考虑了光强、相对湿度、初始浓度与气体流速对气相苯光降解的影响。结果表明,建立的数学模型与实验结果吻合较好。     

Kinetics study of fermentative hydrogen production from liquid swine manure supplemented with glucose under controlled pH

Kinetics of H₂ production from liquid swine manure supplemented with glucose by mixed anaerobic cultures was investigated using batch experiments under four different pH conditions (4.4, 5.0, 5.6, and uncontrolled). The temperature for the experiments was controlled at 37 ± 1°C and the length of experiments varied between 50 and 120 hours, depending upon the time needed for completion of each individual experiment. The modified Gompertz model was evaluated for its suitability for describing the H₂ production potential, H₂ production rate, and substrate consumption rate for all the experiments. The results showed that the Gompertz model could adequately fit the experimental results. The effect of pH was significant on all kinetic parameters for H₂ production including yield, production rate and lag time, and the substrate utilization rate. The optimal pH was found to be 5.0, at which a maximum H₂ production rate (0.64 L H₂/h) was obtained, and deviation from the optimal pH could result in substantial reductions in H₂ production rate (0.32 L H₂/h for pH 4.0 and 0.43 L H₂/h for pH 5.6). The results also showed that if pH was not controlled for the batch fermentation process, the substrate utilization efficiency could steeply decrease from 98.8% to 33.7%.     

Speciation and persistence of doxycycline in the aquatic environment: Characterization in terms of steady state kinetics

The aim of the present work was to establish the kinetics for the degradation of doxycycline in the aquatic environment with a view to arriving at a kinetic model that can be used to predict the persistence of antibiotic with confidence. The degradation of doxycycline in both water and sediment phases of aquatic microcosm experiments, as well as in distilled water control experiments, was studied over a period of 90 days. An initial 21% loss due to adsorption by the sediment was observed in the microcosm experiment soon after charging. Biphasic zero-order linear rates of degradation, attributed to microbial degradation of the free and sediment or colloidal particle-adsorbed antibiotic, were observed for both water phase (2.3 × 10^?2 and 4.5 × 10^?3 μgg^?1 day^?1) and sediment phase (7.9 × 10^?3 and 1.5 × 10^?3 μgg^?1 day^?1) of the microcosm experiment. The covered distilled water control experiment exhibited a monophasic zero-order linear rate (1.9 × 10^?3 μgg^?1 day^?1) attributed to hydrolysis, while the distilled water experiment exposed to natural light exhibited biphasic liner rates attributed to a combination of hydrolysis and photolysis (2.9 × 10^?3 μgg^?1 day^?1) and to microbial degradation (9.8 × 10^?3 μgg^?1 day^?1). A kinetic model that takes into account hydrolysis, photolysis, microbial degradation as well as sorption/desorption by colloidal and sediment particles is presented to account for the observed zero-order kinetics. The implications of the observed kinetics on the persistence of doxycycline in the aquatic environment are discussed.     

pH对活化前后废弃铁铝泥吸附不同种磷动力学的影响

实验研究了300℃热活化前后的给水厂废弃铁铝泥（R-FARs和H300-FARs）对正磷酸盐、聚磷酸盐和有机磷酸盐的吸附动力学特性,并考察pH对不同磷吸附动力学的影响。结果表明,pH对不同磷吸附动力学过程的影响趋势相似,即低pH有利于吸附。准二级动力学模型能够更真实地反映不同磷在R-FARs和H300-FARs的吸附动力学行为,由拟合结果可知焦磷酸盐和六肌醇磷酸盐的初始吸附速率相对较大,而甘油磷酸盐最小;且活化作用明显提高了不同磷的初始吸附速率,并减弱了pH对初始吸附速率的影响。不同磷的吸附速率受到液膜扩散、颗粒内扩散和吸附反应三者共同控制,其中吸附反应是主要的控制步骤。     

活性炭纤维对水中微囊藻毒素的吸附性能

利用活性炭纤维对水中微囊藻毒素MC—LR的吸附,研究了吸附过程的热力学与动力学特性。结果表明,活性炭纤维对MC—LR的平衡吸附量在相同温度下随MC-LR初始浓度的增加而显著增大,并随着温度升高而增加,最大吸附量达246μg／g。不同温度条件下,活性炭纤维对MC-LR的吸附均较好地符合Langmuir等温吸附模型。通过热力学分析发现,△H=15．7kJ／mol、△G〈0、△S〉0,表明该吸附是自发的、吸热的过程,温度升高有利于吸附反应。动力学研究表明,该过程符合一级动力学方程。吸附反应速率受颗粒内扩散和液膜扩散共同影响。活性炭纤维经再生后,平衡吸附量变化较小,具有良好的重复使用性能。     

一株木材腐朽菌及其粗酶液对七氯的降解

Phlebia acanthocystis TMIC34875是一株具有七氯降解能力的木材腐朽菌。为利用微生物技术去除环境中的七氯残留提供理论依据,研究了该菌株及其粗酶液对七氯的降解性能及其动力学特性。结果表明,菌株在七氯的初始浓度为50μmol/L时具有最大降解速率,为0.3031μmol/（L·h）;而菌体接种量为15%时,降解速率达到最高,为0.2045μmol/（L·h）。降解酶定位研究表明,七氯的降解主要是胞内酶在起作用。七氯胞内酶降解的酶促反应最适温度是35℃,在30-40℃之间有较高的催化活性;最适pH值为5.0,在pH 4.5-6.0之间有较高的催化活性,最适条件下反应1 h后七氯的降解率为65%。胞内粗酶液降解七氯的米氏常数K m为5.42μmol/L,最大反应速率V max为4.55μmol/min。胞内酶处理体系的GC/MS图谱显示,主要降解产物为1-羟基六氯、1-羟基-2,3-环氧六氯和环氧七氯,表明胞内酶对七氯的初始代谢机理同菌株相似,均是通过环氧化和置换反应来完成的。     

Immobilization of Pb(II), Cd(II) and Ni(II) ions on kaolinite and montmorillonite surfaces from aqueous medium

The present study investigates the immobilization of Pb(II), Cd(II) and Ni(II) on clays (kaolinite and montmorillonite) in aqueous medium through the process of adsorption under a set of variables (concentration of metal ion, amount of clay, pH, time and temperature of interaction). Increasing pH favours the removal of metal ions till they are precipitated as the insoluble hydroxides. The uptake is rapid with maximum adsorption being observed within 180 min for Pb(II) and Ni(II) and 240 min for Cd(II). A number of available models like the Lagergren pseudo first-order kinetics, second-order kinetics, Elovich equation, liquid film diffusion and intra-particle diffusion are utilized to evaluate the kinetics and the mechanism of the immobilization interactions. Two isotherm equations due to Langmuir and Freundlich showed good fits with the experimental data. Kaolinite and montmorillonite have considerable Langmuir monolayer capacity with respect to Pb(II), Cd(II) and Ni(II), the values being in the range of 6.8-11.5mg/g (kaolinite) and 21.1-31.1mg/g (montmorillonite). The Freundlich adsorption capacity follows a similar order. The thermodynamics of the immobilization process indicates the same to be exothermic with Pb(II) and Ni(II), but endothermic with Cd(II). The interactions with Pb(II) and Ni(II) are accompanied by decrease in entropy and Gibbs energy while the endothermic immobilization of Cd(II) is supported by an increase in entropy and an appreciable decrease in Gibbs energy. The results have established good potentiality for kaolinite and montmorillonite to remove heavy metals like Pb(II), Cd(II) and Ni(II) from aqueous medium through adsorption-mediated immobilization.     

Toluene removal biofilter modeling: Optimization and case study

Based on the model proposed by De Visscher and Van Cleemput for methane oxidation in landfill cover soils, a simulation model for biofiltration of toluene-contaminated air has been developed for biofilters with substrate inhibition. A convenient way to optimize biofilter performance was developed assuming Haldane kinetics. It was calculated that for a typical oilsands operation emitting 200 ton of toluene annually, 90% of the toluene can be removed by a 740 m³ biofilter, if the waste gas sent to the biofilter has a toluene concentration of 2.25 g m⁻³. The optimal initial concentration increases with increasing target efficiency.