黄壤表面电场作用下Cu~(2+)与Zn~(2+)的吸附/解吸动力学研究

利用静态恒流法研究了黄壤表面电场作用下Cu2+与Zn2+的吸附/解吸动力学.结果发现:考虑黄壤表面电场作用下,Cu2+和Zn2+的吸附实验呈现初期强吸附作用下的零级动力学过程和一定时间之后弱吸附作用下的一级动力学过程,与理论预期一致;在Cu2+和Zn2+的解吸实验中,只有前期出现了弱吸附作用下的一级动力学过程,实验结果与理论预期存在差别,原因在于专性吸附的Cu2+、Zn2+很难被解吸下来;在交换/吸附实验中,Cu2+的吸附速率值和平衡吸附量均大于Zn2+,且Cu2+-K+体系的表面电化学参数φ0、σ0、E0均大于Zn2+-K+体系中的对应值,证明了黄壤颗粒表面对Cu2+的吸附作用强于Zn2+;在交换/解吸实验中,Zn2+的解吸速率值和平衡解吸量均大于Cu2+,Zn2+-K+体系的表面电化学参数φ0、σ0、E0均大于Cu2+-K+体系中的对应值,证明Zn2+-K+体系中Zn2+的解吸作用比Cu2+-K+体系中的Cu2+解吸作用强.     

The sorption of selenite from aqueous solutions by pyrite

Selenium (Se) is an essential trace nutrient for mammals; however, the range between deficit and toxic levels is narrow. In this study, the potential sorption of selenite onto pyrite particles from an aqueous solution was investigated. An intraparticle diffusion model was used to describe kinetic data of sorption, yielding diffusivity values of 5 × 10^?7 cm²/s. The Langmuir isotherm equation could be used to describe the experimental data. The fitting results indicated that b and {Se(IV)}_max have values of 0.37 L/mg and 3.49 mg/g, respectively. The sorption of selenite onto the surface of pyrite particles was dependent on a pH range of 2–12, and the quantity of sorption onto pyrite was negatively correlated with pH; that is, the amount of sorption onto pyrite increased with a decrease in pH. In addition, organic matter did not exert a significant effect on removal of selenite. With a reaction time greater than 1 week, sorption of selenite onto pyrite particles was found to partially reduce the amount of elemental Se.     

The relationship between light intensity and nutrient uptake kinetics in six freshwater diatoms

In order to find effective measures to control diatom blooms, a better understanding of the physiological characteristics of nutrient uptake in diatoms is needed. A study of P and Si-uptake kinetics for diatom species from two light regimes was conducted at low (LL), moderate (ML) and high light intensities (HL) (2, 25 and 80 μmol photons/(m²·sec)), respectively. The results showed that P uptake of diatoms was heavily influenced by historic light regimes. P affinity changed with growth and photosynthetic activity. The lowest half saturation constant for P uptake (K_m(P)) was under HL for high-light adapted diatoms while the lowest half-saturation constant for low-light adapted diatoms was observed under LL. The Si half-saturation constant (K_m(Si)) increased with increasing light intensities for pennate diatoms but decreased for centric diatoms. Diatom volumes were correlated with the maximum Si uptake rates (V_m(Si)) at HL and K_m(Si) at ML and HL for six diatom species. Our results imply that when we assess the development of diatom blooms we should consider light intensity and cell volume in addition to ambient Si or P concentration. The relationship between light intensity and P-uptake suggests that we can find suitable methods to control diatom blooms on the basis of reducing phytoplankton activity of P-uptake and photosynthesis simultaneously.     

Kinetic,equilibrium and thermodynamic studies for the sorption of metribuzin from aqueous solution using banana peels,an agro-based biomass

Banana peels were employed for the removal of metribuzin from aqueous solution. Sorption in the batch mode was optimized regarding pH, contact time, sorbent dose, initial pesticide concentrations, and temperature. The sorption data were fitted to pseudo-first-order, pseudo-second-order, intraparticle diffusion, Elovich, and liquid film diffusion model, the pseudo-second-order exhibiting best fit (R² = 0.9803). Of the four most common sorption isotherm models (Langmuir, Freundlich, Tempkin, and Dubinin–Radushkevich), the data followed the Langmuir isotherm with highest correlation. The maximum adsorption capacity was found to be 167 mg g^?1. Gibbs free energy, enthalpy, and entropy showed that the sorption was exothermic and spontaneous.     

Kinetic and equilibrium isotherm studies for the adsorptive removal of Brilliant Green dye from aqueous solution by rice husk ash

The present study deals with the adsorption of Brilliant Green (BG) on rice husk ash (RHA). RHA is a solid waste obtained from the particulate collection equipment attached to the flue gas lines of rice husk fired boilers. Batch studies were performed to evaluate the influences of various experimental parameters like initial pH (pH0), contact time, adsorbent dose and initial concentration (C0) on the removal of BG. Optimum conditions for BG removal were found to be pH0 approximately 3.0, adsorbent dose approximately 6 g L(-1) of solution and equilibrium time approximately 5 h for the C0 range of 50-300 mg L(-1). Adsorption of BG followed pseudo-second-order kinetics. Intra-particle diffusion does not seem to control the BG removal process. Equilibrium isotherms for the adsorption of BG on RHA were analyzed by Freundlich, Langmuir, Redlich-Peterson (R-P), Dubnin-Radushkevich (D-R), and Temkin isotherm models using a non-linear regression technique. Langmuir and R-P isotherms were found to best represent the data for BG adsorption onto RHA. Adsorption of BG on RHA is favourably influenced by an increase in the temperature of the operation. Values of the change in entropy (DeltaS0) and heat of adsorption (DeltaH0) for BG adsorption on RHA were positive. The high negative value of change in Gibbs free energy (DeltaG0) indicates the feasible and spontaneous adsorption of BG on RHA.     

富油煤热解产物在粉砂介质中的吸附行为研究

富油煤原位热解产生的油、气等有机物会通过岩层的压裂缝进入含水层,产生一系列环境行为效应.为探究富油煤热解产物对地下水的影响,以陕北榆神府矿区富油煤与含水介质粉砂为研究对象,采用批量平衡试验,开展了粉砂对煤焦油不同组分的吸附动力学与吸附热力学研究.结果表明：粉砂对煤焦油中酚油、萘油、洗油、蒽油、沥青的动力学吸附均符合准二级动力学方程,等温吸附模型符合Freundlich方程,说明粉砂对5种组分的吸附为单分子层化学吸附;受富油煤热解焦油组分含量差异影响,粉砂对5种组分的吸附量表现为酚油<萘油<洗油<蒽油<沥青,其最大吸附量分别为0.4520、0.7926、1.9015、3.6336、11.8001 mg·g^-1,吸附量总和占煤焦油含量的68%~85%;随着温度的升高,粉砂对5种组分的吸附能力均有所减弱,表明升高温度不利于吸附行为的进行,且反应的ΔG⁰<0表明粉砂对5种组分的吸附过程主要以化学吸附为主且属于放热反应.     

多元竞争体系下的微界面动力学响应机理研究—以细颗粒泥沙吸附多元重金属离子铅、铜和镉为例

研究微界面动力学响应机理能更好地了解动力学扩散模式的内在机制.通过竞争吸附实验,采用微界面作用模式识别多元重金属离子铅、铜和镉在泥沙颗粒上的扩散模式,探究多元重金属离子的液相浓度和吸附速率变化规律,剖析多元竞争体系下的微界面动力学响应机理.结果显示,10 min前,多元竞争体系下离子的液相浓度和吸附速率变化较大,为快速吸附阶段,与扩散速率较大的膜扩散过程对应.10 min后,离子的液相浓度波动变化,吸附速率变化呈“N型”、“倒N型”、“W型”和“倒W型”特征,吸附解吸交替进行,不同竞争体系离子的液相浓度和吸附速率变化不同,进入孔隙的时间存在差异,此阶段为膜扩散和颗粒内扩散并存,不同竞争体系的离子的颗粒内扩散时间不一致.60 min后, 离子的液相浓度较稳定和吸附速率较小,微界面作用趋于稳定,为扩散速率较小的颗粒内扩散阶段.研究结果可为多元竞争体系的微观界面动力学响应机理提供理论支撑.     

β-PbO2和BDD电极处理印染反渗透浓水性能

系统比较了β-PbO₂/Ti-Ti和BDD/Si-Ti两种电极体系处理实际印染行业反渗透浓水(ROC)的性能,考察了同步去除化学需氧量(COD)和总氮(TN)的动力学,以及对废水可生化性的改善情况.结果表明,BDD/Si-Ti电极体系的析氧电位(2.45V)和析氯电位(1.90V),以及阳极氧化电位和阴极还原电位的绝对值均高于β-PbO₂/Ti-Ti电极体系;两种电极体系对COD以及TN的去除符合拟一级动力学,其中BDD/Si-Ti电极体系对COD去除的表观速率常数和能量利用效率均优于β-PbO₂/Ti-Ti电极体系;而β-PbO₂/Ti-Ti电极体系对TN去除的表观速率常数和能量利用效率更优.β-PbO₂/Ti-Ti电极体系在5mA/cm²的电流密度下电解15min,可使反渗透浓水BOD/COD从0.18升至0.42(提高1.33倍),而BDD/Si-Ti电极体系仅提升0.78倍.两者相比,BDD/Si-Ti电极体系适用于矿化污染物,β-PbO₂/Ti-Ti电极体系适用于改善废水可生化性.     

深圳市工业区VOCs污染特征与臭氧生成敏感性

于2020年9~10月在深圳北部典型工业区开展在线观测以分析该地VOCs污染状况,并使用基于观测的模型(OBM)研究臭氧生成敏感性.观测期间VOCs的总浓度为48.5×10^-9,浓度水平上烷烃>含氧有机物(OVOCs)>卤代烃>芳香烃>烯烃>乙炔>乙腈.臭氧生成潜势(OFP)为320μg/m³,其中芳香烃、OVOCs以及烷烃贡献最大,这3类物种OFP贡献总和超过90%.乙烯与苯呈现“两峰一谷”的日变化特征,主要受到机动车排放的贡献.相对增量反应性(RIR)分析表明,削减人为源VOCs对控制当地臭氧生成最为有效,当中又应优先控制芳香烃;经典动力学曲线(EKMA)分析表明该片区臭氧生成处于过渡区,在开展VOCs区域联防联控的同时,需要在当地进行有力的NOx控制以强化该地区臭氧污染长期管控.     

钠化改性河南南部膨润土吸附亚甲基蓝性能分析

以河南南部天然钙基膨润土为原料,通过钠化改性得到了钠基膨润土.通过调控吸附剂用量、亚甲基蓝（MB）浓度、吸附时间、溶液pH值和温度,分析对比了天然钙基膨润土（PRT-1）、钙基提纯膨润土（PRT-1T）和钠基膨润土（PRT-1Na）对MB的去除效率.同时,对PRT-1T和PRT-1Na对MB的吸附动力学和吸附机制进行了研究.结果表明,由于PRT-1Na有更大的比表面积、更高的阳离子交换容量和更丰富的羟基结构,表现出对MB更好的吸附效果.在同等吸附条件下,PRT-1Na的吸附效果是PRT-1的4倍,PRT-1T是PRT-1的2倍.在20℃,pH为6,PRT-1Na用量为1.0 g,吸附时间为2 h,MB为500 mL,且初始浓度为500 mg·L^-1时,MB去除率高达99.89%.另外,PRT-1Na对MB染料废水的吸附既存在物理吸附也有化学吸附,Elovich模型对PRT-1T和PRT-1Na吸附MB染料废水的过程拟合度均高,但伪一级动力学模型对PRT-1Na拟合效果最好.