白腐真菌GanodermaSinense对镉和蒽的去除能力

重金属和有机物复合污染是水处理中的难题。本研究发现一株白腐真菌Ganoderma Sinensis不仅可以通过富集作用去除重金属镉(Cd),而且对蒽具有降解能力。当Cd的浓度为10~30 mg/L时,该菌株对Cd的去除率为6.78%~21.9%;当蒽的浓度为10~30 mg/L时,菌株对蒽的降解率为18.25%~33.3%;当Cd和蒽同时存在于培养基中时,随着Cd浓度的增加(10~30 mg/L),对菌株的生物量及蒽降解的抑制作用也在增大;而随着蒽浓度的增加(10~30 mg/L),菌株的生物量及Cd的富集能力并未受到显著的影响。实验结果表明,该菌株有望用于镉和蒽复合污染的水体处理。     

巢湖低温高效聚磷菌的筛选及其特性

采用低温富集培养及混合平板分离技术,从巢湖底泥中分离筛选得到2株在低温下仍具有较高效能的菌株D3、D6,经过厌氧/好氧交替培养,2种菌株在低温下(8℃)的除磷率均达到80%以上。在低温下,研究了pH、微量元素对2株菌株生长及除磷率的影响,实验结果表明,2株菌都具有广泛的温度适应性,适宜其生长和除磷的pH为中性偏碱,微量元素的缺乏对2株菌株的生长和除磷效果有不同程度的不良影响。染色观察显示,厌氧培养时菌体内聚羟基丁酸(PHB)颗粒明显增多,转为好氧培养后异染颗粒增多,为典型的聚磷菌特征。经鉴定,2株菌均属假单胞菌属。     

石油降解菌Pseudomonas stutzeri TH-31的分离与降解条件优化

使用稀释富集法,从大港油田采油废水处理站生化池中定向快速的分离出多株高效石油降解菌株。对分离获得的1株优势菌株进行生理生化和分子生物学鉴定,显示属于Pseudomonas stutzeri的1个新菌株,命名为Pseudomonas stutzeri TH-31。通过批次实验,对菌株TH-31的生长条件和石油降解条件进行了优化,经过条件优化,P.stutzeri TH-31在初始pH 7,原油投加量为300 mg/L,35℃培养5 d后,获得最高石油烃降解率92.7%。     

基于化工生产过程历史数据的报警优化方法研究

为了有效降低报警装置漏报率和误报率,基于化工生产的过程历史数据,探讨了报警优化的两种方法。以误报率和漏报率为优化指标,建立报警阈值目标函数,从最小化目标函数的角度出发,采用数值优化的方法进行报警阈值的优化设计。基于报警时长的变异系数,应用自适应报警延时方法来降低报警数量。实例研究表明,应用基于化工生产过程历史数据的方法,可有效减少无效报警数量,降低误报率和漏报率,提高报警质量,对于提高石化生产过程的安全性具有积极意义。     

Examination of factors associated with use rates after transition from a universal to partial motorcycle helmet use law

Objectives: Motorcycle riders account for a disproportionately high number of traffic injuries and fatalities compared to occupants of other vehicle types. Though research has demonstrated the benefits of helmet use in preventing serious and fatal injuries in the event of a crash, helmet use has remained relatively stable in the United States, where the most recent national estimates show a 64% use rate. Use rates have been markedly lower among those states that do not have a universal helmet law for all riders. In 2012, the state of Michigan repealed its longstanding mandatory helmet use law. In order to gain insights as to the effects of this legislative change, a study was conducted to examine short-term changes in helmet use and identify factors associated with use rates.

Methods: A statewide direct observation survey was conducted 1 year after the transition from a universal helmet law to a partial helmet law. A random parameters logistic regression model was estimated to identify motorcyclist, roadway, and environmental characteristics associated with helmet use. This modeling framework accounts for both intravehicle correlation (between riders and passengers on the same motorcycle) as well as unobserved heterogeneity across riders due to important unobserved factors.

Results: Helmet use was shown to vary across demographic segments of the motorcyclist population. Use rates were higher among Caucasian riders, as well as among those age 60 and above. No significant difference was observed between male and female riders. Use was also found to vary geographically, temporally, and with respect to various environmental characteristics. Geographically, helmet use rates tended to be correlated with historical restraint use trends, which may be reflective of riding environment and general differences in the riding population. To this end, rates were also highly variable based upon the type of motorcycle and whether the motorcyclist was wearing high-visibility gear.

Conclusions: The study results demonstrate the short-term reduction in helmet use following transition from a universal to partial motorcycle helmet law. The reduction in use is somewhat less pronounced than has been experienced in other states, which may be reflective of general differences among Michigan motorcyclists because the state has also generally exhibited higher use rates of seat belts and other forms of occupant protection. The study results also highlight potential target areas for subsequent education and public awareness initiatives aimed at increasing helmet use.     

微波辐照作用对颗粒煤瓦斯解吸特性影响实验研究

为了研究微波场连续-间断辐照作用对颗粒煤瓦斯解吸特性的影响,通过自制的实验装置,分析研究了微波连续-间断作用10 ,20 ,40 s及无微波作用下的构造煤颗粒瓦斯解吸量及解吸速率变化规律,并采用水浴加热装置模拟微波产生的热效应,研究了微波热效应在促进煤粒瓦斯解吸中的影响。实验结果表明:在微波连续作用时间内,瓦斯解吸量和解吸速率均迅速增大,然而随着时间的延长衰减较快,最终瓦斯解吸量趋向于一定值,微波连续-间断辐照作用下的瓦斯解吸量是无微波加载作用下的1.83～3.93倍;微波产生的热效应对瓦斯解吸影响较为显著,权重达82%以上,然而其非热效应的影响也不可忽视。实验方法与结果可望为促进构造瓦斯解吸、降低煤层突出危险性提供参考。     

偶氮类染料脱色率的定量构效关系

偶氮类染料的生产和使用过程中存在着三废多、难脱色和污染严重等问题,该染料是印染工业的主要污染物。选取偶氮类染料的分子结构参数和其光催化氧化脱色率之间建立定量结构活性关系(QSAR),进而得到回归方程,为印染废水处理和染料环境行为评价提供理论预测。结果表明,偶氮类染料的光催化氧化脱色率与其结构之间存在着线性相关性,线性方程为:D=0.647μ+66.277,(D为脱色率、μ为偶极矩)R=0.989方程具有预测能力。     

纳滤工艺去除水中微量内分泌干扰物

主要研究了DL1210型纳滤膜去除水中邻苯二甲酸二丁酯(DBP)、邻苯二甲酸二(2-乙基己基)酯(DEHP)、乐果和莠去津的影响因素,考察了温度、pH值、初始浓度、跨膜压力(TMP)和运行时间对膜通量和截留率的影响。结果表明,纳滤工艺是去除水中微量DBP、DEHP、乐果和莠去津的有效方法,初始pH值和温度的升高会导致纳滤膜对DBP、DEHP、乐果和莠去津的截留率的降低,膜对DBP和DEHP的截留率随初始浓度的升高而降低,TMP和运行时间不会对膜通量和目标污染物的截留率造成显著影响。当初始pH为5、初始浓度为5μg/L、温度为5℃、TMP为0.4 MPa时,纳滤工艺对DBP、DEHP、乐果和莠去津的截留率达到最佳,分别为91.8%、89.8%、98.02%和77.6%,出水中DBP、DEHP、乐果和莠去津浓度分别为0.41、0.49、0.099和1.12μg/L。     

氧活性粒子氧化NO生成HNO_3

采用强电离介质阻挡放电方法制取高浓度氧活性粒子(O+2、O3)并注入气体外排烟道中,实现O+2、O3氧化NO转化成资源酸(HNO3)的等离子化学反应。描述强电离放电的氧活性粒子产生器,讨论烟道中O+2、O3氧化NO成HNO3等离子体反应机制,分析回收酸液的NO-2、NO-3离子种类及浓度。考察强电离放电等离子体源的输入功率、水体积百分比、气体温度、气体流速对NOx氧化率的影响。氧化率为97.2%的最佳实验条件是:O+2浓度为1.38×1010个/cm3,O3浓度为210 mg/L,烟气温度为65℃,H2O体积浓度为5.6%,停留时间为0.94 s。     

Effects of environmental temperature on the thermal runaway of lithium-ion batteries during charging process

Lithium-ion batteries with relatively narrow operating temperature range have provoked concerns regarding the safety of LIBs. In this work, a series of experiments were conducted to explore the thermal runaway (TR) behaviors of charging batteries in a high/low temperature test chamber. The effects of charging rates (0.5 C, 1 C, 2 C, and 3 C), and ambient temperature (2 °C, 32 °C and 56 °C) are comprehensively investigated.The results indicate that the cell exhibited greater thermal hazard at the high charging rate and ambient temperature conditions. As the charging rate increased from 0.5 C to 3 C, more lithium intercalated in the anode prompt the TR triggered in advance, the TR onset temperature decreased from 297.5 °C to 264.7 °C. In addition, the charging time decreased with the elevated ambient temperature, resulting in a relatively higher TR onset temperature and lower maximum temperature, and the average TR critical time declined by 115–143 s. Finally, the TR required less heat accumulation with increasing of charging rate and ambient temperature, and the heat generation of side reaction played a substantial role that accounted for approximately 54%∼63%. These results provide an insight into the charging cell thermal runaway behaviors in complex operation environments and deliver valuable guidance for improving the safety of cell operation.