膜生物反应器中溶解性微生物产物特性的研究进展

溶解性微生物产物是制约生物处理出水达标和回用的主要污染物,处理工艺和操作条件的不同可能造成其特性差异。阐述了溶解性微生物产物的定义和产生机制,对膜生物反应器中溶解性微生物产物的组成、分子质量分布、亲水／疏水性、螯合性和毒性进行了概述,分析了影响其产生、特性和去除的因素。由于膜的截留作用使溶解性微生物产物在膜生物反应器中积累,容易引起膜污染。可以通过优化操作条件,减少溶解性微生物产物的产生,提高出水水质,有效地抑制膜污染。     

Filterability of oil sands tailings

In Canadian oil sands mining operations, bitumen is extracted from oil sands using the hot water extraction process, which produces tremendous amounts of tailings. Currently, these tailings are disposed of in large ponds, in which coarse particles settle out relatively quickly and fine particles remain suspended in water and settle very slowly. After years of settling, the fine particles form a stable suspension in water known as mature fine tailings (MFTs). Long-term storage of the MFT is costly and poses a major environmental liability.Oil sands companies are now actively investigating different approaches to replace or reduce the use of oil sands tailings ponds. Filtration of the tailings to produce “dry tailings” for stacking is now being investigated as an alternative by a number of companies. Fast water drainage is a critical step for the filtration process. In this paper, we use simple laboratory-scale filtration tests to evaluate the filterability of the oil sands tailings and to generate a parameter that can be used in filtration scale-up. It was found that the filterability of the original coarse oil sands tailings was relatively low. However, after the fines are flocculated with the coarse particles to form uniform flocs the filterability was improved by several orders of magnitude. The results demonstrate that filtration of the flocculated coarse tailings to produce the “dry” stackable tailings may be viable.     

污水厂污泥一体化竖式强化渗滤浓缩自然干化与消化研究

针对目前国内污泥处理处置存在的问题,为实现污泥浓缩消化一体化,开发了污泥一体化强化渗滤浓缩自然干化与消化新工艺反应器,并进行了城市水厂污泥处理试验.结果表明,在有机负荷为0.8 kg VSS/(m3·d)、平均水力停留时间为8.3 d、污泥停留时间为120 d的条件下,污泥有机物去除率可达到44.4%,排泥含水率达到79.1%,污泥消化与浓缩过程起到了相互促进的作用.渗滤液须抽回至污水处理厂处理.     

昌吉州农田地膜污染现状及治理对策

通过对昌吉州农田地膜使用现状进行调查,阐述了地膜污染的危害,并提出了适期揭膜、残膜回收、推广新型生物膜等措施与防治对策。     

多波长法用于减小浊度对水源水中甲醛测定结果的影响

比较了减小水样浊度对样品结果影响的各种方法,包括过滤法、双波长法、三波长法,3种方法均基于乙酰丙酮分光光度法,测定波长均为414 nm。结果表明,以480 nm为参比波长的双波长法所得方法检出限为0.027 mg/L,采用470 nm与360 nm、460 nm与370 nm、450 nm与380 nm 3对参比波长的三波长法测得方法检出限为0.025~0.028 mg/L,这些方法用于检测0.100 mg/L标准点样品时,检测结果 RSD介于8.0%~8.6%。双波长法适合低浊度样品的直接分析,而浊度较高或双波长法测得结果大于方法检出限时,应采用三波长法进行定量分析,他们的使用有助于提高方法的准确度及减少工作量。用于地表水样品分析时,0.200、0.400 mg/L加标样品的回收率介于90.3%~101%,对应RSD介于0.0%~4.2%。     

烟气脱碳技术进展

介绍了吸收法、吸附法、低温法、膜分离法回收烟道气中CO2的研究和应用现状,并对这些方法进行了比较,指出了适用范围。     

有机废气中VOC的回收方法

介绍了炭吸附法、冷凝法和膜分离法回胥机废报中ＶＯＤ的原理、工艺流程和工业应用情况，并对这些方法进行了比较，指出了适用范围。     

油漆挥发分爆炸特性及浓度检测装置设计研究

为了实现对喷涂车间内挥发分浓度的检测,进行20 L球形爆炸特性测试实验,分析了油漆挥发分主成分及爆炸特性,根据油漆挥发分受热易挥发遇冷易凝结的物理特性、采样器采样原理、滤膜增重法测量原理以及基于单机片C++软件程序编写的电路智能控制技术,设计1种喷涂车间挥发分浓度检测装置。研究结果表明:油漆挥发分主成分具有爆炸性,且随着油漆颗粒物浓度增大,爆炸压力也增加。设计的装置对挥发分的采集率都在90%以上,总采集率为93.1%~98.9%,装置能够较为准确地检测挥发分浓度。     

高含盐废水脱盐处理技术研究进展

综述了几种常见的高含盐废水脱盐处理技术的发展历程、工艺原理、优缺点及目前的研究进展,分析了热分离、膜分离、电渗析、离子交换、电吸附、微生物脱盐等方法的优缺点,展望了未来废水脱盐工艺的发展方向。指出：脱盐方法将根据各类水体的水质特点更加精细化;多种脱盐技术联合应用也是今后废水脱盐的发展方向。     

Investigation of titanium liquid/gas diffusion layers in proton exchange membrane electrolyzer cells

In a proton exchange membrane electrolyzer cell (PEMEC), liquid/gas diffusion layer (LGDL) is expected to transport electrons, heat, and reactants/products to and from the catalyst layer with minimum voltage, current, thermal, interfacial, and fluidic losses. In addition, carbon materials, which are typically used in PEM fuel cells (PEMFCs), are unsuitable in PEMECs due to the high ohmic potential and highly oxidative environment of the oxygen electrode. In this study, a set of titanium gas diffusion layers with different thicknesses and porosities are designed and examined coupled with the development of a robust titanium bipolar plate. It has been found that the performance of electrolyzer improves along with a decrease in thickness or porosity of the anode LGDL of titanium woven meshes. The ohmic resistance of anode LGDL and contact resistance between anode LGDL and the anode catalyst play dominant roles in electrolyzer performance, and better performance can be obtained by reducing ohmic resistance. Thin titanium LGDLs with straight-through pores and optimal pore morphologies are recommended for the future developments of low-cost LGDLs with minimum ohmic/transport losses.