磁性膨润土材料吸附处理印染废水研究

针对目前膨润土在应用中的一些问题,对膨润土进行磁性能改性,通过共沉淀法制备磁性膨润土颗粒,并对其进行了X射线衍射和磁性能表征分析.以阴离子染料OrangeⅡ为目标化合物,研究了磁性膨润土材料对OrangeⅡ废水的吸附效果,并探讨了主要工艺参数如阳离子表面活性剂的质量浓度、pH、温度等对染料去除率的影响.结果表明:阳离子...     

典型气浮净水设备评述

文章主要从气浮设备的原理与结构、优缺点、应用情况等方面评述了加压溶气气浮设备、涡凹气浮设备、浅层气浮设备、电气浮设备、充气水力旋流器、多段环流气浮塔和旋流-充气气浮系统等气浮设备,并讨论了气浮设备的研究和应用发展趋势。     

活性污泥吸附絮凝中纤板废水的研究

利用实验室培养的活性污泥吸附絮凝预处理中纤板废水中的悬浮物和有机物。研究结果表明,当污泥投加量为6~9 g/L,废水pH值为6,吸附絮凝时间为30 min,沉淀时间为30 min时,处理效果最好,对废水中SS,COD和SCOD的去除率分别为29%,24%和17%左右。该方法为含高悬浮物、高有机物工业废水的预处理开辟了新途径。     

制革废水深度处理回用ABFT工艺中试研究

研究了针对物化混凝＋SBR二级处理后的制革废水,采用ABFT＋吸附混凝沉淀工艺进行深度处理,其中出水主要污染物平均NH3-N 0.9mg/L,CODcr 133.8mg/L,平均去除率分别为99.0%和71.7%。通过脱色方案比较,活性炭吸附混凝沉淀法去除色度效果显著,出水色度低于5倍,另外出水回用于制革企业的生产性实验取得了成功,标志着制革废水深度处理与中水回用技术的一次重要突破,对制革废水处理提标减排和中水回用的开展具有良好的推动作用。     

氟硅酸钠废水处理与循环利用探讨

从芒硝法（Na2SO4）氟硅酸钠生产工艺过程分析了氟硅酸钠母液废水的来源和主要成分,剖析了现有污水处理工艺过程存在的三个方面缺陷,并从实施清洁生产、节能减排和完善治理设施两方面提出了改进对策,全面实现了废水的循环利用。     

火焰原子吸收光谱法测定电镀废水中高浓度的锡

采用盐酸消解样品,用火焰原子吸收光谱法测定电镀废水中高浓度的锡的质量浓度,方法简单可靠。通过实验样品的分析,验证了方法的准确度和精密度。该方法干扰少,数据准确,适合废水分析。     

有机改性膨润土在印染废水处理中的应用

膨润土是一种非常有用的非金属矿物原料,其有机改性得到的有机改性膨润土可以较好地去除印染废水中的有机污染物和色度。本文综述了有机改性膨润土的制备方法及其在印染废水处理中的应用现状。     

含油废水处理技术

概述了含油废水的来源、特点、分类及危害,介绍了含油废水的处理方法的原理、优势及存在的问题,同时简述了各种处理方法的最新研究成果,最后提出了含油废水发展趋势。     

2-丁烯醛生产废水中溶解性有机物的分级解析

采用超滤膜法将2-丁烯醛生产废水中的有机物分为相对分子质量不同的7个级分,并应用溶解性有机碳(dissolved organic carbon,DOC)、紫外吸收光谱(ultraviolet spectrum,UV)、傅里叶变换红外光谱(fourier transform infrared spectrometer,FT-IR)和气相色谱/质谱联用仪(gas chromatography with mass spectrometry,GC-MS)技术对不同相对分子质量区间的有机物所占比例及物质结构进行了研究.结果表明,废水中相对分子质量1×103的有机物所占比例最高,达到88.57%;采用GCMS对废水中相对分子质量1×103的级分进行分析,定性出27种化合物,包含醛、酮、酯、醇、酚、酸、烷烃类及其他苯系物等,其峰面积占有机物峰面积总和的比例分别为6.9%、5.3%、35.4%、13.2%、4.6%、0.4%、1.7%、16.8%,总和为84%.UV和FT-IR分析结果均显示不同相对分子质量区间的光谱吸收特征没有明显差别,级分中存在含有不饱和双键、羟基、羰基化合物及芳香族化合物,与GC-MS检测结果相吻合.研究结果为废水处理工艺的开发与优化提供了重要的指导作用.     

Removal of polycyclic aromatic hydrocarbons from aqueous solution by raw and modified plant residue materials as biosorbents

Removal of polycyclic aromatic hydrocarbons （PAHs）, e.g., naphthalene, acenaphthene, phenanthrene and pyrene, from aqueous solution by raw and modified plant residues was investigated to develop low cost biosorbents for organic pollutant abatement. Bamboo wood, pine wood, pine needles and pine bark were selected as plant residues, and acid hydrolysis was used as an easily modification method. The raw and modified biosorbents were characterized by elemental analysis, Fourier transform infrared spectroscopy and scanning electron microscopy. The sorption isotherms of PAHs to raw biosorbents were apparently linear, and were dominated by a partitioning process. In comparison, the isotherms of the hydrolyzed biosorbents displayed nonlinearity, which was controlled by partitioning and the specific interaction mechanism. The sorpfion kinetic curves of PAHs to the raw and modified plant residues fit well with the pseudo second-order kinetics model. The sorption rates were faster for the raw biosorbents than the corresponding hydrolyzed biosorbents, which was attributed to the latter having more condensed domains （i.e., exposed aromatic core）. By the consumption of the amorphous cellulose component under acid hydrolysis, the sorption capability of the hydrolyzed biosorbents was notably enhanced, i.e., 6-18 fold for phenanthrene, 6-8 fold for naphthalene and pyrene and 5-8 fold for acenaphthene. The sorpfion coefficients （Kd） were negatively correlated with the polarity index [（O＋N）/C], and positively correlated with the aromaticity of the biosorbents. For a given biosorbent, a positive linear correlation between logKoc and logKow for different PAHs was observed. Interestingly, the linear plots of logKoc-logKow were parallel for different biosorbents. These observations suggest that the raw and modified plant residues have great potential as biosorbents to remove PAHs from wastewater.