基于PFC对含断续节理岩质边坡静力荷载下破坏形式的研究

在含断续节理岩质边坡的破坏中,阶梯状破坏尤其显著,是一种常见的失稳破坏形式。借助二维颗粒流软件(PFC2D5.0)进行简单地质结构模型下的边坡数值模拟,通过采用PFC软件中的人工合成岩体技术,研究了7种不同组合形式下含断续节理岩质边坡的破坏形式及其内部微观接触力场的演变规律。首先对PFC软件中采用的微观力学性质参数进行了验证模拟,通过对完整岩块进行双轴压缩试验和巴西劈裂试验的模拟,得出其应力-应变曲线和强度包络线,从而计算出完整岩块的内聚力、内摩擦角等宏观力学参数;然后通过对含裂隙的颗粒集合体进行直剪试验的模拟,得出其剪应力-剪切位移曲线以及峰值强度和残余强度与正应力的关系曲线,从而计算出裂隙的内聚力和内摩擦角;最后对含上述微观力学性质参数的边坡进行静力荷载下破坏形式的模拟,得出裂隙萌生前应力集中、裂隙萌生后应力释放,以及可将潜在滑动面上方的坡体位移分成4个区,即坡脚处最大位移区、坡肩处较大位移区、坡体内部较小位移区、坡体后缘最小位移区,并验证了萌生的裂隙一般会近垂直于岩桥向坡体表面扩展,切割潜在滑动面以上坡体。     

船用E500钢在海水中阴极极化氢脆敏感性研究

目的研究阴极保护电位对E500钢在海水中氢脆敏感性的影响。方法采用慢应变速率拉伸试验(SSRT),同时利用三电极体系进行不同电位极化,并结合扫描电镜进行试样断口观察。结果随着阴极保护电位负移,E500钢在海水中的氢脆敏感性增加,阴极保护电位为-0.95 V(vs.SCE)时,拉伸试样出现脆性解理断裂特征,电位为-1.00 V时,E500钢断口呈脆性断裂特征。结论根据氢脆系数拟合曲线得出,当氢脆系数达到25%时,E500钢最负阴极保护电位应为-0.913 V。     

H2S匀圆杂选择性催化氧化工艺及催化剂研究现状

论述了石油流化催化裂化烟气中H2S气体的选择性催化氧化处理工艺和工艺中所使用的各种类型选择性氧化催化剂.目前已发展并投入使用的选择性氧化工艺主要有:Superclaus工艺、Euroclaus工艺、Clinsulf-Do工艺、BSR/Hi-Activity工艺、Selectox工艺和Modop工艺等,各工艺具有不同的特点和应用范围.H2S选择氧化催化剂主要包括以下几种体系:碳体系、SiC载体体系、分子筛体系、氧化物体系和柱撑黏土体系等.其中碳体系和氧化物体系的研究开展的较早较多,关于分子筛体系的研究近期有所减少,SiC是研究人员认为非常有潜力的一个载体体系,其相关体系研究也一直在进行之中,柱撑黏土体系还处于初步研究阶段,离实际应用尚有距离.     

一株耐铬细菌的鉴定及其还原铬性能分析

从浙江温州工业区六价铬废水污染的土壤中采样分离得到一株耐铬细菌Y73.16S rRNA基因序列分析表明,该菌株为Staphylococcus(葡萄球菌)属菌,最高可在加有1600 mg·L^-1六价铬(K₂Cr₂O₇)的 LB培养基中生长.该菌为好氧生长,但在3种不同的氧压力下,包括有氧、无氧和兼性无氧(先有氧生长)的条件下都可以还原六价铬,而在兼性无氧(先有氧生长)的条件下达到最高还原效率,可在96 h内将1000 mg·L^-1的六价铬还原83%.另外,该菌株能在较宽的pH值(5~11)和温度(10~50℃)范围内还原六价铬,而最佳反应条件是pH=7 和30℃.随着接种量的增加,六价铬的还原率增加,但接种量超过10%时再增加接种量对六价铬还原的影响不明显.供试的大多数金属离子(50 mg·L^-1)对该菌株还原六价铬的影响也不明显.上述结果说明,菌株Y73有其独特的还原铬性能,以及在处理六价铬污染废水中的应用潜力.     

2株降解菲的植物内生细菌筛选及其降解特性

为了获得具有菲降解特性的植物内生细菌,通过选择性富集培养,本研究从多环芳烃污染区植物体内分离得到2株能够降解液体培养基中高浓度菲(200 mg·L-1)的植物内生细菌(菌株P1和P3).经形态观察、生理生化特征鉴定和16S rDNA序列同源性分析,分别将菌株P1和P3鉴定为寡养单胞菌属(Stenotrophomonas sp.)和假单胞菌属(Pseudomonas sp.)的细菌.菌株P1和P3均为好氧生长,28℃、150 r·min-1摇床培养7 d,2株菌对无机盐培养基中菲(100 mg·L-1)的降解率均高于90%.条件实验表明,温度20～30℃,pH 6.0～8.0,盐含量0%～4%,装液量10～30 mL(100 mL三角瓶)2菌株生长良好且对菲降解率高于70%.其最适生长和降解温度为30℃,pH为7.0,盐含量≤4%,装液量≤30 mL.综合比较2株菌对菲的降解特性,P1菌株高温耐受性稍强,而P3菌株对环境pH改变和缺氧的耐受性稍强.     

Ethyl thiosemicarbazide intercalated organophilic calcined hydrotalcite as a potential sorbent for the removal of uranium(VI) and thorium(IV) ions from aqueous solutions

This work was conducted to determine the practicability of using a new adsorbent 4-ethyl thiosemicarbazide intercalated,organophilic calcined hydrotalcite(ETSC-OHTC) for the removal of uranium(U(VI)),and thorium(Th(IV)) from water and wastewater.The FTIR analysis helped in realizing the involvement of nitrogen and sulphur atoms of ETSC in binding the metal ions through complex formation.Parameters like adsorbent dosage,solution pH,initial metal ions concentration,contact time and ionic strength,that influence adsorption phenomenon,were studied.The optimum pH for maximum adsorption of U(VI) and Th(IV) was found to be in the range 4.0-6.0.The contact time required for reaching equilibrium was 4 hr.The pseudo second-order kinetic model was the best fit to represent the kinetic data.Analysis of the equilibrium adsorption data using Langmuir,Freundlich and Sips models showed that the Freundlich model was well suited to describe the metal ions adsorption.The K F values were 25.43 and 29.11mg/g for U(VI) and Th(IV),respectively,at 30°C.The adsorbent can be regenerated effectively from U(VI) and Th(IV) loaded ones using 0.01mol/L HCl.The new adsorbent was quite stable for many cycles,without much reduction in its adsorption capacity towards the metals.     

Effects of physical and chemical characteristics of surface sediments in the formation of shallow lake algae-induced black bloom

Surface sediments are closely related to lake black blooms. The dissolved oxygen （DO） distribution and its penetration depth in surface sediments as well as the migration and transformation of redox sensitive elements such as Fe and S at the sediment-water interface are important factors that could influence the formation of the black bloom. In this study, dredged and undredged sediment cores with different surface properties were used to simulate black blooms in the laboratory. The Micro Profiling System was employed to explore features of the DO and ∑H2S distribution at the sediment-water interface. Physical and chemical characteristics in sediments and pore waters were also analyzed. The results showed that sediment dredging effectively suppressed the black blooms. In the undredged treatment, DO penetration depth was only 50 μm. Fe^2＋ concentrations, ∑H2S concentrations, and ∑H2S production rates were remarkably higher in surface sediments and pore waters compared to control and dredged treatments. Furthermore, depletion of DO and accumulation of Fe^2＋ and ∑H2S in surface sediments and pore waters provided favorable redox environments and necessary material sources for the blooms. The study results proved that physical and chemical characteristics in surface sediments are important factors in the formation of the black bloom, and could provide scientific guidance for emergency treatment and long-term pre-control of black blooms.     

解析环境监测中3S技术的应用

伴随现代信息技术的发展,3S技术逐渐运用于生物环境的动态监测中,并发挥了其绝对的运用优势.本案通过对3S技术的特性进行着手分析,系统探究了3S技术在生物环境的动态监测中的具体运用.     

3S技术在高速公路生态影响评价中的应用

3S技术将生态环境影响评价由定性评价转向定量预测,为建设项目生态影响评价提供了新的研究途径。文章以灌阳至平乐公路建设项目为例,制作了公路沿线生态敏感区空间分布图。对高速公路建设前沿线景观和建设后沿线模拟景观进行分类和制图,并进行高速公路修建前后景观指数计算,分析了高速公路修建前后景观格局的变化。结果表明:高速公路的建设将导致景观格局的改变,景观异质性增加。     

PHAST软件对孔洞泄漏扩散危险区域的分析

运用PHAST软件研究泄漏孔径、风速、泄漏时间和大气稳定度对泄漏扩散面积的影响。结果表明:扩散面积随着泄漏孔径的增大、风速的增大及泄漏时间的增长而增加;大气越稳定,泄漏扩散面积越大。