The effect of the exposure time on the value of a manSievert averted

The basis of the manSievert as a unit for collective radiation dose is discussed and previous recommendations are considered for how much should be spent to avert a collective dose of 1 manSv. New calculations are given using the J-value method. It is shown that the value to be assigned to averting a manSievert depends on the duration of averted exposure as well as on the net discount rate and the loan rate thought to be appropriate. Different figures will result depending on whether the exposed group consists of workers or the general public. The variation with dose duration is so large that it is not possible to recommend a single figure for the value of a manSievert. Instead, tables are given at two conservative, loan and net discount rates for the value of a manSievert as a function of exposure time. The base data for the J-value method need to be updated annually, and this means that the values given in the tables will increase over time as people live longer and become richer.     

Bags with oven-dried moss for the active monitoring of airborne trace elements in urban areas

To define a harmonized methodology for the use of moss and lichen bags as active monitoring devices of airborne trace elements in urban areas, we evaluated the element accumulation in bags exposed in Naples in different spring weather conditions for 6- and 12-weeks. Three different pre-exposure treatments were applied to moss and lichen materials: water-washing, acid-washing and oven-drying. During the different exposure periods in the Naples urban environment the moss accumulated always higher amounts of elements (except Hg) than lichens and the element accumulation increased during wetter weather and higher PM₁₀ conditions. The oven pre-treatment did not substantially modify the morphology and element composition of moss and the exposure in bags of this material for 6-weeks was sufficient to detect the pattern of airborne trace elements.     

Genotoxic biomonitoring of agricultural workers exposed to pesticides in the north of Sinaloa State, Mexico

Genotoxic damage was evaluated in 70 agricultural workers, 25 women and 45 men, exposed to pesticides in Las Grullas, Ahome, Sinaloa, Mexico, with an average of 7 years of exposure. The effect was detected through the sister chromatid exchanges (SCE) in lymphocytes of peripheral blood and micronuclei (MN) and other nuclear anomalies (NA) in buccal exfoliated cells. Also, the influence on cellular proliferation kinetics (CPK) was studied by means of the replication index (RI) and the cytotoxic effect was examined with the mitotic index (MI). The non-exposed group consisted of 70 other persons, 21 women and 47 men from the city of Los Mochis, Sinaloa, Mexico. Significant differences between the exposed and the non-exposed groups were observed in SCE, CPK, MI, MN and NA. Analysis of variance revealed that age, gender, smoking and alcohol consumption did not have a significant effect on genetic damage. However, there was a correlation between exposure time to pesticides and SCE frequency. These results could have been due to the exposure of workers to pesticides containing different chemical compounds. This study afforded valuable data to estimate the possible risk to health associated with pesticide exposure.     

Natural radioactivity in refractory manufacturing plants and exposure of workers to ionising radiation

This paper shows the results of a survey carried out at some refractory manufacturing plants. During the first part of the survey, the concentration of natural radioactivity in raw materials and end-products, coming from four plants, was assessed. Several raw materials and, as a consequence, some end-products as well have shown activity concentrations exceeding a few hundreds of Bq kg⁻¹ of ²³⁸U and ²³²Th. In some important raw materials, such as bauxite and corundums, a remarkable radioactive disequilibrium was observed; this is probably due to the high temperature processes undergone by these materials. The second part of the survey focussed on the measurements of ambient equivalent dose rates, airborne dust concentrations and radon indoor. On the basis of results obtained, the effective dose for the standard worker was estimated. Two different types of refractory plants were investigated. Effective doses for both plants were lower than 1 mSv y⁻¹.     

Evidence for bioamplification of nine polychlorinated biphenyl (PCB) congeners in yellow perch (Perca flavascens) eggs during incubation

This study investigated bioamplification of polychlorinated biphenyls (PCBs) in yellow perch (Perca flavescens) eggs resulting from nutrient utilization by developing embryos during incubation. Newly fertilized eggs containing trace levels of PCBs via maternal deposition were collected from an aquaculture pond in which adult broodstock had been reared over their natural lives. The eggs were incubated using a flow through system that received the same pond water at in-situ temperatures from which they were spawned. Replicate samples of eggs were collected at six time points throughout incubation, ranging from day 0 (newly fertilized eggs) to post-hatch larvae (2-d old). Congener specific PCB fugacities in pooled egg samples showed increases over the incubation period. Just prior to hatching, incubated eggs averaged 2.7-fold higher PCB fugacities compared to fresh eggs. The increase in PCB fugacity with egg incubation time was independent of chemical K_OW. After hatching, PCB residues were lost from the larvae, attenuating the maximum chemical fugacity achieved in late-incubated eggs. However, the rate of PCB elimination in the early larvae stages was K_OW dependent such that a significant larvae/egg fugacity ratio was still evident for intermediate and highly hydrophobic compounds 2 d post-hatching. This study provides the first evidence of in-ovo PCB bioamplification in eggs of an aquatic species and suggests that incubating fish embryos are exposed to higher chemical fugacities in-ovo than would be predicted by maternal deposition alone.     

Exposure to electromagnetic fields in the magnetic resonance imaging environment in South Africa

Occupational exposure to radiofrequency (RF) and static magnetic fields at magnetic resonance imaging (MRI) suites is of continuing concern to personnel who routinely work in this environment. Questions regarding the levels of occupational RF and static field exposure have increased with the increasing demand for anesthetics to be administered in this environment. The present study was thus designed towards addressing the above-mentioned problem by gaining information regarding exposure levels of clinical personnel at MRI units in South Africa. Three 1.5 MRI units in Bloemfontein, South Africa were utilized to evaluate the exposure of clinical personnel to the electromagnetic fields present in the MRI environment over a period of time and during different clinical MRI procedures. Three rounds of measurements of RF fields in the MRI environment were done. All the three measurement rounds were focused on the low frequencies, 5 Hz–32 kHz, as well as on the high frequencies, 300 kHz–40 GHz. First round measurements were done to establish the background of the RF fields in and around the magnet room during an MRI examination. Second round RF field measurements were done at a specific location, 1 m away from the bore on the right-hand side of the bed, in the MRI room. The third round measurements were of the same format as the second round, but the specific location was against the magnet bore. Two pieces of Narda Safety Test Solution instruments, the EFA-300 and EMR-300, were used to measure the electromagnetic and magnetic exposure fields generated from the MRI scanners. Results of the measurements indicate that the electromagnetic fields measured during different clinical procedures do not exceed the International Commission on Non-Ionizing Radiation Protection (2000) guidelines in these units. Results from round two and three showed that the RF and gradient exposure 1 m and up against the bore entrance does not exceed these guidelines (rms average over 6 min). Ongoing new developments in MRI scanning create the need for continuously monitoring exposure of patients and workers to the EMF fields in the MRI environment.     

Thallium in the Environment and Health Effects

Thallium is present in the natural environment in low concentration, being found most frequently in the sulphide ores of a number of heavy metals. Atmospheric emission and deposition from industrial sources has resulted in raised levels in the vicinity of mineral smelters, coal burning power plants, brick works and cement plants. In contaminated areas, raised levels are found in vegetables, fruit and in farm animals. Thallium is used industrially in small quantities, with uses in electronics, in the production of certain glasses and crystals and in medical diagnostics. It has in the past been commonly used as a rodenticide, but its use has now been banned in many countries. Thallium salts are now considered to be amongst the most toxic compounds known. With regard to population exposure, an epidemiological study in an area with high thallium concentrations in soil and garden vegetables centred on a cement plant, has found evidence of a dose response relationship between thallium concentration in urine and a number of non-specific subjective symptoms. Much further research is required to investigate the possible adverse health effects of thallium following population exposure.     

Bioconcentration kinetics of PCBs in various parts of the lifecycle of the tadpoles Xenopus laevis

Polychlorinated biphenyls （PCBs） in Xenopus laevis have been reported only for a few congeners. Additionally, there is very little information on the ability of Xenopus laevis to bioconcentrate PCBs. To address these issues, the tadpole Xenopus laevis was exposed to Aroclor 1254 mixtures in water at room temperature for 110 d followed by an additional 110 d of nonspiked PCBs in the water for the control group. During the whole process, bioconcentration factors （BCFs） of PCBs ranged from 1180 to 15670. For most PCB congeners, the highest and lowest bioconcentrations of the kinetic curves were found to be remarkably simultaneous, respectively. All 141 PCB congeners under the same experimental conditions had no linear correlation on the lgBCF versus lgKow relationship. The relationship between lgBCFs and lgKow followed a parabolic pattern indicative of selective bioconcentration, suggesting that the kinetic curves of the PCB congeners observed in the lifecycle of the tadpoles may be concentrated due to the amphibian special species and internal metabolism. In contrast, lgBCFs for PCBs were inversely related to lgKow, suggesting that a metabolism of the higher Kow PCB congeners occurred. These results support the author＇s conclusion that the tadpole Xenopus laevis plays major roles in the bioconcentration of PCB congeners, and demonstrated that the exposure kinetic curves of PCB congeners are complex. Besides the amphibian metamorphous development, the lifecycle of the tadpole Xenopus laevis also may be of importance in determining the bioconcentration of PCB congeners.     

Occupational risk from static magnetic fields of MRI scanners

The health care staff operating magnetic resonance imaging (MRI) scanners are exposed to static magnetic field of significant spatial heterogenity and high level of flux density—usually existing permanently during the shift. The personnel can also be exposed to pulses of magnetic field of high rate of rise/fall, so-called gradient fields, which exist only during examination of patients. The level of workers’ exposure depends both on the type of the magnet and on the ergonomical characteristic of design of the particular MRI scanner. This paper presents the current state of the art on occupational exposure to static magnetic field health effects, gaps in scientific data, MRI workers’ exposure characteristics, research needs, and suggestions for the exposure assessment protocol for future investigations.     

Practical aspects of occupational EMF exposure assessment

Electromagnetic fields exposure assessment methodology is briefly presented. The basic problems defined for the practical use of electromagnetic fields measurements and numerical calculations carried out for workers exposure assessment in real occupational situations are discussed. The examples of data from real workplace are presented, focusing: spatial distribution of electromagnetic fields affecting worker’s body, complex characteristics of the frequency content, workers activities/moving in the workplace, field impedance, etc. The situation when the use of calculations is required is discussed. The basic requirements for workers exposure assessment protocols are presented. The possible range of the use of internal and external measures of exposure level is also discussed.