Efficient removal of polybrominated diphenyl ethers from soil washing effluent by dummy molecular imprinted adsorbents: Selectivity and mechanisms

Surfactant enhanced elution is an effective method for removing hydrophobic organic pollutants from soils. The key to the development of leaching technology is selective removal of targeted pollutants in soil washing effluent and recycling of surfactant solutions. In this study, a molecular imprinting technique was applied to selectively sorb polybrominated diphenyl ethers (PBDEs) in soil washing effluent. The novel molecular imprinted polymers (MIPs) using different template molecules were synthesized by precipitation polymerization. Adsorption behaviors and mechanisms of MIPs were studied through experiments and theoretical calculations. The results show that 4-bromo-4′-hydroxybiphenyl and toluene can be effective imprinting molecule for MIPs synthesis. The maximal adsorption capacity of selected dummy molecular imprinted polymer (D₁-MIP) was 1032.36 µmol/g, and that of part molecular imprinted polymer (P-MIP) was 981.13 µmol/g. Their imprinting factors in 5 PBDEs adsorption ranged from 2.13 to 5.88, the recovery percentage of Triton X-100 can reach 99.09%, confirming the feasibility of reusing surfactant. Various PBDEs could be removed by MIPs, and Quantitative Structure Property Relationship analysis revealed that PBDEs’ molecular volume, planarity, polarity, and hydrophobicity have major influences on their adsorption performance. DFT calculation revealed that Van der Waals force and hydrogen bonding played important roles during selective adsorption. These results can provide effective theoretical guidance for surfactant enhanced soil elution in practical engineering applications.     

Triton X-100在黄土上的吸附行为及影响因素

水土体系下,应用批实验法研究了Triton X-100在天然黄土上的吸附行为与平衡时间、Triton X-100浓度、溶液离子强度和pH值的关系.结果表明,Triton X-100在黄土中的吸附平衡时间约为30 min,其吸附动力学符合一级动力学模型,相应拟合参数Qe、k1、r2分别为3.041 mg·g-1、0.102 min-1、0.993 4.吸附等温线明显为非线性,在利用的4种等温吸附模型中,Sips模型对实验数据提供了最佳的拟合,其拟合参数Qmax和r2分别为3.202 mg·g-1和0.998 7.溶液离子强度和pH值对Triton X-100在黄土上的吸附有显著的影响,其吸附量随NaCl浓度的增加而明显增加,随pH增加而降低.     

混合表面活性剂对植物吸收有机氯农药的影响

以水培体系模拟研究了阴-非离子混合表面活性剂SDBS-TX100对黑麦草吸收有机氯农药（OCPs）p,p＇-DDT和γ-HCH的影响.结果发现,在SDBS与TX100物质的量比（以下简称＂配比＂）为0：10,1：9,5：5,9：1时,能促进黑麦草吸收积累OCPs.SDBS-TX100增强黑麦草吸收OCPs的程度与混合表...     

Cl-作用下AerMet100钢在盐雾环境中的 微区电化学行为

目的对Cl~-作用下AerMet100钢在盐雾环境中的腐蚀和微区电化学行为进行研究。方法通过开展盐雾腐蚀试验,对AerMet100钢的腐蚀形貌和腐蚀产物进行研究分析。盐雾试验不同时间后,通过SKP测试,得到试样的表面电位分布,通过Gauss拟合,对试样表面扫描开尔文电位的分布和变化情况进行分析。结果 AerMet100钢在盐雾腐蚀试验过程中的腐蚀行为从点蚀开始,逐渐发展为均匀腐蚀。腐蚀产物分为内外两层,外层疏松,内层致密。由于腐蚀反应过程中生成大量铁的氧化物及羟基氧化物,因此,内外层腐蚀产物中含有大量的Fe、O元素;内外锈层中均含有少量的Cl元素,表明Cl~-参与了腐蚀反应过程;内外锈层中Cr、Co、Ni等合金元素的存在,使得锈层具有离子选择性、致密性,加速了锈层的产生。未腐蚀的试样表面电位分布比较均匀,集中程度较高,即电位差较小,总体电位差为152 mV,有少量表面活性点随机分布,此时试样表面阴极和阳极分布不规则。盐雾试验3天后,试样表面电位正移,分布趋于分散,电位差增大,总体电位差为270m V,产生较为明显的阴极区和阳极区,由于吸附在试样表面活性点附近的Cl~-破坏了表面的氧化膜,腐蚀情况逐渐发生。盐雾试验6天后,试样表面电位进一步升高,分布更为分散,电位差略有减小,总体电位差为180 mV,由于腐蚀产物层的不断扩展,试样表面已经分为明显的较大面积的阴极区和阳极区。结论 Cl~-的侵蚀作用破坏了基体表面的氧化膜,使得AerMet100钢的腐蚀在夹杂物处发生。腐蚀产物能够阻碍Cl~-的渗透,对基体具有保护作用。