Environmental conditions enhance toxicant effects in larvae of the ground beetle Pterostichus oblongopunctatus (Coleoptera: Carabidae)

The wide geographical distribution of ground beetles Pterostichus oblongopunctatus makes them very likely to be exposed to several environmental stressors at the same time. These could include both climatic stress and exposure to chemicals. Our previous studies demonstrated that the combined effect of nickel (Ni) and chlorpyrifos (CHP) was temperature (T)-dependent in adult P. oblongopunctatus. Frequently the different developmental stages of an organism are differently sensitive to single stressors, and for a number of reasons, such as differences in exposure routes, their interactions may also take different forms. Because of this, we studied the effects of the same factors on the beetle larvae. The results showed that all factors, as well as their interactions, influenced larvae survival. The synergistic effect of Ni and CPF was temperature-dependent and the effect of Ni × T interaction on the proportion of emerged imagines indicated stronger toxicity of Ni at 25 °C than at 10 °C.     

A modeling assessment of the thermal regime for an urban sport fishery

Water temperature is almost certainly a limiting factor in the maintenance of a self-sustaining rainbow trout (Oncorhynchus mykiss, formerlySalmo gairdneri) and brown trout (Salmo trutta) fishery in the lower reaches of the Cache la Poudre River near Fort Collins, Colorado, USA. Irrigation diversions dewater portions of the river, but cold reservoir releases moderate water temperatures during some periods. The US Fish and Wildlife Service’s Stream Network Temperature Model (SNTEMP) was applied to a 31-km segment of the river using readily available stream geometry and hydrological and meteorological data. The calibrated model produced satisfactory water temperature predictions (R ²=0.88,P<0.001, N=49) for a 62-day summer period. It was used to evaluate a variety of flow and nonflow alternatives to keep water temperatures below 23.3°C for the trout. Supplemental flows or reduced diversions of 3 m³/sec would be needed to maintain suitable summer temperatures throughout most of the study area. Such flows would be especially beneficial during weekends when current irrigation patterns reduce flows. The model indicated that increasing the riparian shade would result in little improvement in water temperatures but that decreasing the stream width would result in significant temperature reductions. Introduction of a more thermally tolerant redband trout (Oncorhynchus sp.), or smallmouth bass (Micropterus dolomieui) might prove beneficial to the fishery. Construction of deep pools for thermal refugia might also be helpful.     

FRACTIONAL DIFFERENCING MODELING IN HYDROLOGY1

ABSTRACT: Fractional differencing is a tool for modeling time series which have long-term dependence; i.e., series in which the correlation between distant observations, though small, is not negligible. Fractionally differenced ARIMA models are formed by permitting the differencing parameter d in the familiar Box-Jenkins ARIMA(p, d, q) models to take nonintegral values; they permit the simultaneous modeling of the long-term and short-term behavior of an observed time series. This paper discusses the usefulness of fractional differencing to time-series modeling, with emphasis on hydrologic applications. A methodology for fitting fractionally differenced ARIMA models is described, and examples are presented.     

Comprehensive temperature monitoring in an in-vessel forced-aeration static-bed composting process

Comprehensive temperature monitoring was done in an in-vessel forced-aeration static-bed composting process using sewage sludge. The three layers that divided the compost pile horizontally showed different temperature distributions. The temperature of the top layer appeared not to be influenced by the ambient temperature. The temperature of the center area of the top layer was taken to be the representative temperature for evaluating composting start-up performance. The temperature of the bottom layer was strongly influenced by the ambient temperature, and the temperature of the center area of the bottom layer was taken to be the representative temperature for pathogen control as it was the minimum temperature in the reactor. Composting start-up performance was influenced by several factors when the ambient temperature was either below or above 20°C. When the ambient temperature was below 20°C, the time taken to reach 65°C (T ₆₅) was influenced by the temperature of inflowing air, but when the temperature was higher than 20°C, it was influenced by the ratio of sewage sludge to seed compost (F/S). T ₆₅ was least when F/S was 1–2. Received: January 9, 2001 / Accepted: October 10, 2001     

火旋风的模拟实验研究

模拟火旋风的实验研究，应用热成像方法获得了火旋风温度场的结构，测量得到火旋风火焰特有的大高度直径比的物理现象；火焰高度比相同燃料，油液面积的油池火高度高，趱戏比油池火直径小。火旋风的切向速度比油池火大，卷吸效果好，可用这一特点来研究熄灭火旋风的火灾。对火旋风火灾机理的研究提出了一种有效的实验方法。     

黑河流域生态环境的脆弱性及其对地下水的依赖性

本文通过翔实的素材阐述了河西走廊黑河流域生态环境的脆弱性及其对地下水环境的依赖性,根据野外实地考察实料揭月了适合西北生态脆弱区的地下水可持续利用模式,并指出了生态环境保护与水资源利用协调发展的国土安全意义.     

Numerical Prediction of Dispersion Characteristics in an Urban Area Based on Grid Refinement and Various Turbulence Models

A detailed simulation of the Goettinger Strasse pollutantdispersion problem is performed using the CFD code CFX-TASCflow for different wind directions. Two turbulencemodels, the k- and the RSM are adopted on three gridrefinement levels. Besides the typical reference gridimplemented by the TRAPOS group, two different gridresolutions are introduced. The first refinement is in thewhole street canyon region on the x-y level, while thesecond one is local in all three directions. Validation ofall involved computational schemes is performed based onrelative available experimental data. The computed velocityfields and concentration contours imply that the typicalreference grid is a suitable choice for the velocityfields, while local grid refinement in all three directionsin a small region containing the receptor is required toupgrade the pollutant concentration results with modestadditional computational effort. Finally the RSM modelresulted in smaller concentration levels. The k-model compared to the RSM seems a more appropriate choiceto solve this particular problem.     

L型钢管混凝土芯柱耐火极限研究

火灾高温对结构安全有显著影响,为研究等肢L形钢管混凝土芯柱的耐火极限及其影响因素,利用ABAQUS软件建立合理的高温反应分析模型,在验证模型可靠性基础上,分析了荷载比、截面边长、长细比、荷载偏心率、含钢率等对L形钢管混凝土芯柱耐火极限的影响。研究结果表明:在一定参数范围内,荷载比和截面边长是构件耐火极限的主要影响参数,荷载比越小,截面边长越大,构件的耐火极限越高;长细比和荷载偏心率对其影响较大,长细比和荷载偏心率越小,构件的耐火极限越高;含钢率对其影响不显著。结果可为异形钢管混凝土芯柱的抗火安全设计提供参考。     

The effects of temperature on decomposition and allelopathic phytotoxicity of boneseed litter

Decomposition of plant litter is a fundamental process in ecosystem function, carbon and nutrient cycling and, by extension, climate change. This study aimed to investigate the role of temperature on the decomposition of water soluble phenolics(WSP), carbon and soil nutrients in conjunction with the phytotoxicity dynamics of Chrysanthemoides monilifera subsp. monilifera(boneseed) litter. Treatments consisted of three factors including decomposition materials(litter alone, litter with soil and soil alone), decomposition periods and temperatures(5–15, 15–25and 25–35°C(night/day)). Leachates were collected on 0, 5, 10, 20, 40 and 60 th days to analyse physico-chemical parameters and phytotoxicity. Water soluble phenolics and dissolved organic carbon(DOC) increased with increasing temperature while nutrients like SO-24 and NO-13 decreased. Speed of germination, hypocotyl and radical length and weight of Lactuca sativa exposed to leachates were decreased with increasing decomposition temperature. All treatment components had significant effects on these parameters. There had a strong correlation between DOC and WSP, and WSP content of the leachates with radical length of test species. This study identified complex interactivity among temperature, WSP, DOC and soil nutrient dynamics of litter occupied soil and that these factors work together to influence phytotoxicity.     

Strength and tightness evaluation method for pipe flange connections considering thermal effects

The pipe flange connection is widely applied in chemical, power plants, petrochemical, offshore oil and gas industries, and its strength and tightness are significant for the safe operation. However, there are still no practical and applicable strength and tightness evaluation methods for pipe flange connections working in dramatically varying temperatures. This paper proposed an approach to evaluate the pipeline's strength and sealing performance considering thermal effects in actual operating conditions by combining the experimental measurement and thermostructural analysis. The critical thermodynamic parameters are identified through measured temperature data in operating conditions, and then these parameters are used in the thermostructural analysis to obtain the actual temperature and stress fields. Then, the strength and tightness in complex temperature cases can be evaluated accurately. The pipe flange connection of a liquefied natural gas (LNG) fueling station is analyzed to verify the presented method's effectiveness. This method applies to evaluating the pipeline's strength and tightness and can predict the pipeline's performances under extreme temperatures using the tested data within the measurement range and the corresponding thermostructural analysis. Furthermore, the work in this paper also provides a reference for the design and analysis of pipe flange connections working in complex temperature conditions.