深水河大桥桥墩边坡稳定性分析

深水河大桥桥墩边坡地处广乐高速深水河大桥段,其稳定性直接关系着桥墩桩基工程能否顺利施工和整段广乐高速的工程进度。本文采用定性分析和定量计算的方法对深水河大桥桥墩边坡稳定性进行了分析,定性分析主要是通过赤平投影法作图初步分析边坡局部可能出现的组合滑面破坏模式,再取典型的楔形体进行破坏模式分析,定量计算主要是采用Bishop法分别计算该边坡在不同工况下的稳定系数,从而对该边坡的整体稳定性进行评价,以便提出相应的治理措施。     

模糊评判在岩质边坡稳定性评价中的应用

在工程实践中,影响岩质边坡稳定性的因素众多,不同因素的影响程度不相同,具有不确定性,因此选择合适的方法对岩质边坡稳定性进行评价尤为关键。本文采用模糊综合评判方法对岩质边坡进行稳定性评价,首先阐明了如何建立模糊评判体系以及权重和隶属度的确定方法,然后以某岩质边坡为实例,采用模糊评判方法对其稳定性进行了评价,结果表明模糊评判的结果与实际情况较为吻合,说明该方法真实、有效,具有一定的借鉴意义。     

Improvement of soil aggregate stability by repeated applications of organic amendments to a cultivated silty loam soil

The objective of this study was to compare the effects of repeated field applications of three urban compost amendments and one farmyard manure amendment over a 9-year period on aggregate stability in a silty loam soil initially characterized by low clay and initial organic matter contents and poor aggregate stability. Three different aggregate stability tests with increasing disruptive intensities (fast wetting > mechanical breakdown > slow wetting tests) and different disaggregation mechanisms, were used. All of the amendments, which were applied at approximately 4 Mg C ha⁻¹ every other year, increased the organic carbon content and improved the stability of the aggregates against the disruptive action of water, as determined by each of the stability tests. However, the year-to-year variations in the aggregate stability that related to factors other than the organic inputs were greater than the cumulative increase in aggregate stability relative to the control. The positive effects of the tested amendments on aggregate stability were linked to their contribution to soil organic C contents (r = 0.54 for the fast wetting test and r = 0.41-0.42 for the mechanical breakdown and slow wetting tests; p < 0.05). The addition of urban composts had a larger positive effect on aggregate stability than farmyard manure at the majority of sampling dates. The addition of biodegradable immature compost, such as municipal solid waste (MSW), improved the aggregate stability through an enhanced resistance to slaking. The addition of mature composts, such as the co-compost of sewage sludge and green wastes (GWS) or biowaste compost (BW), improved the aggregate stability by increasing interparticular cohesion. The MSW compost was the most efficient in improving aggregate stability during the first 6 years of the experiment (average improvements of +22%, +5% and +28% in the fast wetting, mechanical breakdown and slow wetting tests, respectively, compared to the control treatment); this result was likely due to the larger labile organic pool of the MSW compost that was highly effective at stimulating soil microbial activity. After the first 6 years, the two other composts, GWS and BW, became more efficient (average improvements of +25%, +61% and +33% in the fast wetting, mechanical breakdown and slow wetting tests, respectively, compared to the control treatment), which was probably linked to the greater increase in soil organic C contents. Therefore, the application of urban compost to silty soil that is susceptible to water erosion was effective at improving aggregate stability and thus could be used to enhance the resistance of soil to water erosion.     

以高岭土为原料合成高稳定性介孔分子筛

以廉价的高岭土和硅酸钠为硅源,用水热法合成了介孔分子筛。采用X射线粉末衍射、Fourier变换红外光谱、热分析、N2物理吸附、扫描电子显微镜和透射电子显微镜埘样品进行了表征,同时研究了样品的热稳定性和水热稳定性。结果表明：长程有序的介孔分子筛平均孔径约为2．75nm：经900℃焙烧3h或100℃水热处理6d,样品的介孔结构不被破坏,说明样品具有高的热稳定性和水热稳定性。     

火电行业清洁生产评价与体会

研究并分析了火电行业清洁生产评价方法及指标体系,通过工程实例,探讨如何运用清洁生产指标体系,并对其存在的不足及评价过程中可能产生的问题,提出见解和建议。     

Warm forming die design,Part II: Parting surface temperature response characterization of a novel thermal finite element modeling code

The majority of the research activities in the area of warm forming are concentrated on demonstrating or simulating the improved formability associated with forming lightweight materials such as aluminum alloys at elevated temperatures. However, the ability to design the proper thermal management system within the forming tool is a critical aspect to delivering this technology as a viable, stable production alternative to traditional stamping. This work begins to address the thermal stability issues of this process by examining the impact of process cycle time on the parting surface temperature response. Cycle times of 10, 15, 30, and 300 s were evaluated using a reciprocating surface and a self-heated experimental block of 1020 steel fitted with resistance cartridge heaters. The presented results indicate that cycle time does not significantly impact the steady-state temperature response at the parting surface for a well-insulated die that has proper thermal management. Parting surface experimental results were compared to values obtained numerically and through the use of the novel thermal finite element analysis software PASSAGE/Forming^®.     

陶粒CANON反应器的接种启动与运行

通过CANON接种污泥,以人工配制无机高氨氮废水为对象,研究以陶粒为填料的CANON反应器启动与运行情况,结果表明:①陶粒可以作为CANON反应器合适填料,温度通过水浴控制在30℃±1℃,HRT为9 h、pH控制在7.00~8.08之间,经过60 d成功启动了CANON反应器,TN的去除负荷达到0.79 kg·(m3·d)-1;②在温度30℃时,陶粒CANON反应器中临界DO范围在1.12~1.69 mg·L-1之间,CANON反应器中短程硝化和厌氧氨氧化性能可维持稳定,高于此范围时,会出现CANON反应器中短程硝化不稳定现象;③在温度25℃,控制DO在1.01~1.54 mg·L-1之间时,尽管NO-3-N变化值与TN变化值的比值(δNO-3-N/δTN)略微偏离理论值0.127,为0.150~0.204,但CANON反应器脱氮性能趋于稳定,TN去除率最高为75.56%,TN的去除负荷最高达到0.97 kg·(m3·d)-1,这意味着CANON工艺的适宜温度范围至少可以降低至25℃.     

大渡河干海子滑坡稳定性研究

干海子滑坡位于大渡河流域,规模巨大.为研究该滑坡的稳定性,在对滑坡基本特征及变形破坏特征等深入研究的基础上,采用极限平衡法(Geo-slope软件)和有限差分法(FLAC-3D软件)对该滑坡的稳定性和应力应变特征进行了计算、模拟.稳定性计算模拟主要从深层、浅层及局部稳定三方面入手分析,计算模拟结果与滑坡的宏现地质现象均...     

极端冰雪条件下的顺层岩质边坡滑移稳定性分析

推导了典型岩石边坡在极端冰雪条件下的滑移稳定系数的表达式;通过计算分析,揭示了岩石边坡滑移稳定系数随裂隙内水深、坡高、坡角、滑面倾角等因素变化的规律及与冻深的关系,并绘制岩石边坡滑移稳定系数与边坡几何要素之间的关系图.研究表明,当考虑极端冰雪灾害影响时,岩石边坡滑移稳定系数发生较为明显的变化:随裂隙饱水程度、坡面角、主...     

Hazard evaluation for chlorination and amination reactions of fluorocytosine production process

Reaction thermal runaway is one of the most important reasons leading to chemical accidents. With the rapid development of the chemical industry in the world, especially the fine chemical industry, various safety accidents also occur frequently. Therefore, it is necessary to study the exothermic behavior of the reaction process. In this study, reaction calorimeter was used to study the exothermic phenomena during the chlorination reaction and amination reaction. Differential scanning calorimetry was performed on the reactants, and thermogravimetric experiments were performed on the products. In addition, adiabatic experiment was performed to study the thermal runaway behavior of amination products under adiabatic conditions. The results showed that the target reactions generated a large amount of heat in the initial stage. The maximum temperature of amination reaction is higher than the initial decomposition temperature of the amination product under adiabatic condition. The pyrolysis of amination product was divided into three stages. The product had a high apparent activation energy at the beginning of decomposition, and the apparent activation energy decreased as the decomposition progressed.