厌氧—好氧—生物炭系统处理印染废水实例

阐述了采用厌氧水解－好氧生物接触－生物炭吸附氧化工艺处理印染废水的工艺流程、原理、工艺参数及特点。该系统对印染废水ＣＯＤｃｒ及色度的处理取得良好效果，且污泥量少，节省了污泥处理费用。     

连续式磁性颗粒去除器在轧钢废水处理中的应用

连续式磁性颗粒去除器，是利用稀土永磁Ｎｄ－Ｆｅ－Ｂ为材质，处理含磁性颗粒废水的装置，其主要结构由动力传递，磁块组合体，磁条移动，设备本体，进出口流道及分离部件等组成，该文阐述了永磁分离机理，并通过磁性悬浮颗粒的理论驱进速度和最小捕获粒径的求解，探讨了提高砒生粒去除器捕 方法，实践证明，该装置用于冶金轧钢废水处理中，能代替传统的轧钢废水三级处理工艺，节约投资成本７０％，占地减少８５％，运行费用亦大幅     

阳离子絮凝剂研制

介绍了一种阳离子絮凝剂的研制情况。用该絮凝剂对几种污水进行混凝处理，加药后生成的絮体大，沉降速度快，处理后水清澈度高。同时，用日立Ｈ－３００扫描电镜对絮体形态进行了观察，对阳离子絮凝剂的作用机理进行了初步探讨。     

高密度污泥工艺在水处理中的应用

高密度污泥水处理工艺可使污泥生成量减少到十分之一左右，极大地减轻了污泥处理的负担；污泥的沉降和脱水性能得到改善，有可能不再需要投加混凝剂的工序。     

加压活性炭生物膜法处理DSD有机废水

采用加压活性炭生物膜法处理以对硝基甲苯磺酸盐为主的难降解的有机废水的研究,是在活性炭生物膜法处理有机废水基础上发展起来的新技术。本实验结果表明,在加压9.8×10~4Pa(1kgt/cm~2)的条件下,COD_(Cr)去除率为62％～70％,比常压活性炭生物膜法高20％～25％;其容积负荷Nv=1.7～2.9kgCOD/m~3·d,比一般活性污泥法高3～6倍。     

高压脉冲电凝聚技术处理活性染料废水试验研究

难生物降解有机废水是废水处理的难点。阐述了高压脉冲电凝聚技术处理高浓度、难生物降解有机废水的最新机理。采用高压脉冲电凝聚技术处理活性染料（活性红）生产废水．研究了影响高压脉冲电凝聚技术处理活性染料废水效果的操作条件及影响因素．结果表明，在最佳处理工艺条件下。CODCr浓度12628mg／L的生产废水经处理后CODCr去除率为65％左右。再经后续混凝沉淀，最终出水CODCr可降低到1000mg／L以下。     

Effects of acid,acid-ZVI/PMS,Fe(Ⅱ)/PMS and ZVI/PMS conditioning on the wastewater activated sludge(WAS)dewaterability and extracellular polymeric substances(EPS)

The effects of four conditioning approaches:Acid,Acid-zero-valent iron(ZVI)/peroxydisulfate(PMS),Fe(Ⅱ)/PMS and ZVI/PMS,on wastewater activated sludge(WAS) dewatering and organics distribution in supernatant and extracellular polymeric substances(EPS) layers were investigated.The highest reduction in bound water and the most WAS destruction was achieved by Acid-ZVI/PMS,and the optimum conditions were pH 3,ZVI dosage 0.15 g/g dry solid(DS),oxone dosage 0.07 g/g DS and reaction time 10.6 min with the reductions in capillary suction time(CST) and water content(Wc) as 19.67% and 8.49%,respectively.Four conditioning approaches could result in TOC increase in EPS layers and supernatant,and protein(PN) content in tightly bound EPS(TB-EPS).After conditioning,organics in EPS layers could migrate to supernatant.Polysaccharide(PS) was easier to migrate to supernatant than PN.In addition,Acid,Acid-ZVI/PMS or Fe(Ⅱ)/PMS conditioning promoted the release of some polysaccharides containing ring vibrations v P=O,v C-O-C,v C-O-P functional groups from TB-EPS.ESR spectra proved that both radicals of SO_4~-· and·OH contributed to dewatering and organics transformation and migration.CST value of WAS positively correlated with the ratios of PN/PS in LB-EPS and total EPS,while it negatively correlated with TOC,PN content and PS content in TB-EPS,as well as PS content in supernatant and LB-EPS.BWC negatively correlated to zeta potential and TOC value,PN content,and HA content in supernatant.     

城市废水资源化面临的挑战及其对策

城市废水资源化对于缺水城市或水资源污染严重的城市具有十分重要的意义。本文论述了当前城市废水资源化实践中面临的发展战略、立法、评价体系、水质标准、处理技术、设施建设、管理水平、公众态度等方面的障碍和挑战，提出了加强制定有关城市废水资源化的法规和政策、制定合理的回用水水质标准和规范、加强宣传教育、发展运行稳定且高效低耗的废水处理工艺以及将废水资源纳入整体的水资源管理体系等对策和建议。     

混凝法处理油墨废水色度的研究

对pH 4 .5～ 6 .5、COD 6 0 0 0～ 170 0 0 /mg·L-1、色度 10 0～ 35 0倍、SS 2 0 0～ 6 5 0 0 /mg·L-1、外观呈蓝紫色的油墨废水进行了混凝法脱色试验。对混凝剂种类及投药量、pH、助凝剂种类及投药量等工艺条件进行了优选。其中混凝剂为聚合氯化铁 ,投药量为 10 0 /mg·L-1,pH适用范围为 4 .8～ 5 .5。助凝剂为阳离子聚丙烯酰胺 ,分子量为 15 0 0万 ,离子度 4 0 % ,投药量 0 .4 /mg·L-1,处理后的废水脱色率达到 97.0 %以上     

Oil/Suspended Particulate Material Interactions and Sedimentation

The interactions of physically dispersed oil droplets with suspended particulate material (SPM) can be important for the transport of bulk quantities of spilled crude oil and polycyclic aromatic hydrocarbons (PAH) to subtidal sediments. The literature regarding oil/SPM interactions is reviewed, and results from whole-oil droplet/SPM interaction kinetics and pure-component (Prudhoe Bay crude oil distillate cut) equilibrium partitioning experiments are presented. The effects of oil type, SPM characteristics, and salinity on the interaction rates are examined, and the importance of whole-oil droplet/SPM interactions on particle agglomeration and settling behavior are discussed. Whole-oil droplet/SPM interactions are retarded as oil droplet dispersion into the water column is inhibited by oil viscosity increases due to evaporation weathering and water-in-oil emulsification. Compared to whole oil droplet/SPM interactions, dissolved-component/SPM adsorption is not as significant for transport of individual components to sediments. The information presented in this paper can be used to augment computer-based models designed to predict oil-spill trajectories, oil-weathering behavior, and spilled oil impacts to the marine environment.