Capture of carbon dioxide by amine-impregnated as-synthesized MCM-41

The novel carbon dioxide(CO2) adsorbents with a high capture effciency were prepared through impregnating the as-synthesized MCM-41 with three kinds of amines,namely diethylenetriamine(DETA) ,triethylenetetramine(TETA) and 2-amino-2-methyl-1-propanol(AMP) .The resultant samples were characterized by small angle X-ray diffraction and low temperature N2 adsorption.The synthesis way not only saves the energy or extractor to remove the template but also is environmentally friendly due to the absence of the potential pollutants such as toluene.CO2 capture was investigated in a dynamic packed column.The sample impregnated by TETA showed the highest adsorption capacity,approximately 2.22 mmol/g at 60°C due to its highest amino-groups content among the three amines.The CO2 adsorption behavior was also investigated with the deactivation model,which showed an excellent prediction for the breakthrough curves.     

HHMHC对Cu2+、Ni2+的萃取性能

以对羟基苯甲酸为原料,通过化学修饰合成得到上沿羧基化的杯[6]芳烃羟肟衍生物,即5,11,17,23,29,35-六羧基-37,38,39,40,41,42-六羟肟酸甲氧基杯[6]芳烃(HHMHC),采用IR对其结构性能进行表征,并探讨了溶液初始pH值、初始重金属离子(Cu2+、Ni2+)浓度、萃取时间、温度等因素对HHMHC萃取重金属离子的影响.结果表明,在温度为30℃时HHMHC萃取Ni2+和Cu2+的最佳pH值分别为5.0、6.0,萃取平衡时间均为30min.用准二级动力学模型(R2>0.99)和Freundlich等温模型(R2>0.999)均可较好的拟合其萃取过程,通过计算萃取过程的热力学参数,得到Gibbs自由能(ΔG0)和焓变(ΔH0)均小于0,表明萃取反应是一个自发的放热反应.通过红外光谱图分析和考察溶液pH值对萃取分配比的影响,探讨HHMHC萃取Cu2+、Ni2+的机理,结果表明此萃取过程除了存在阳离子交换机理外,还存在与冠醚萃取相同的离子配位萃取,参与配位作用的主要是羟肟基团(–CONHOH).     

有序介孔材料过滤脱除纳米颗粒物

多孔材料过滤去除环境纳米颗粒物(nanoparticles,NPs)是空气净化治理的重要方法之一.本文采用介孔分子筛(MCM-41、SBA-15)和有序介孔碳(CMK-3)这3种典型介孔材料对2~20 nm的NPs进行过滤脱除研究,旨在探索介孔材料在NPs过滤方面的应用可行性与相关理论基础.基于3种介孔材料的物理化学性质表征结果,通过本实验发现介孔材料孔道的最可几孔径以及一定量的介孔孔容是吸附NPs的关键,而微孔分布对去除NPs贡献不大.进一步对SBA-15在不同流量及不同颗粒床厚度下对NPs的去除进行了分析,发现纳米颗粒物的最易穿透粒径(most penetrating particle size,MPPS)随着流量的增大而减小,同时MPPS颗粒物的去除效率随之降低,且MPPS基本不受颗粒床厚度变化的影响.本研究为介孔材料过滤脱除NPs提供了技术依据.     

Fe-MCM-41催化臭氧氧化间甲酚废水

首次应用Fe-MCM-41催化臭氧氧化间甲酚废水.研究了铁的掺杂质量分数、催化剂质量浓度和底物质量浓度对间甲酚转化率和TOC去除率的影响,并采用XRD、H2-TPR、穆斯堡尔谱、BET对催化剂的结构性质进行表征.结果表明,铁的掺杂质量分数对Fe-MCM-41在催化臭氧氧化间甲酚中的活性具有较大影响,最佳掺杂质量分数为4.4%.随着铁掺杂质量分数的提高,介孔分子筛的结晶度减弱,介孔结构晶面间距减小,比表面积、孔容、平均孔径整体上呈下降趋势,Fe在介孔分子筛表面仅以γ-Fe2O3形式存在,且催化剂具有良好的铁磁性和稳定性.臭氧在反应中既有直接氧化作用也有间接氧化作用,且二者比近似为1∶1.在模型废水原始p H值条件下,使用Fe掺杂质量分数为4.4%的催化剂,当间甲酚初始质量浓度为500mg·L-1,催化剂质量浓度为0.1 g·L-1时,30 min内间甲酚转化率为100%,TOC去除率为26.8%.     

Effect of hybridization with genome exclusion on extinction risk

Human‐induced habitat changes may lead to the breakdown of reproductive barriers between distantly related species. This phenomenon may result in fertile first‐generation hybrids (F₁) that exclude the genome of one parental species during gametogenesis, thus disabling introgression. The species extinction risk associated with hybridization with genome exclusion is largely underappreciated because the phenomenon produces only F₁ hybrid phenotype, leading to the misconception that hybrids are sterile and potentially of minor conservation concern. We used a simulation model that integrates the main genetic, demographic, and ecological processes to examine the dynamics of hybridization with genome exclusion. We showed that this mode of hybridization may lead to extremely rapid extinction when the process of genome exclusion is unbalanced between the interbreeding species and when the hybridization rate is not negligible. The coexistence of parental species was possible in some cases of asymmetrical genome exclusion, but show this equilibrium was highly vulnerable to environmental variation. Expanding the exclusive habitat of the species at risk allowed its persistence. Our results highlight the extent of possible extinction risk due to hybridization with genome exclusion and suggest habitat management as a promising conservation strategy. In anticipation of serious threats to biodiversity due to hybridization with genome exclusion, we recommend a detailed assessment of the reproductive status of hybrids in conservation programs. We suggest such assessments include the inspection of genetic content in hybrid gametes.     

钴负载MCM-41分子筛催化臭氧氧化水中氯代苯甲酸

通过水热法合成介孔分子筛MCM-41,采用等体积浸渍法制备了Co负载MCM-41分子筛催化剂(Co/MCM-41).小角X-射线粉末衍射(XRD)、紫外-可见漫反射光谱(UV-vis DRS)、N2吸附-脱附等温线及透射电镜(TEM)等对催化剂的成分、结构的表征结果显示,Co/MCM-41保持了纯硅MCM-41有序的介孔结构,钴元素以钴氧化物形式存在,比表面达到772 m.2g-1.将Co/MCM-41分子筛用于催化臭氧氧化水中对氯苯甲酸(p-CBA)的研究,结果表明,在优化条件下(2%负载量和25℃反应温度),催化剂的加入显著改善了TOC去除率,达到84.6%,是单独臭氧氧化的1.6倍.     

石墨烯改性Al-MCM-41介孔分子筛负载铁芬顿催化剂降解苯酚

采用高温回流法将石墨烯(gh)掺杂于Al-MCM-41介孔分子筛中,通过浸渍法制备了石墨烯改性Al-MCM-41介孔分子筛负载铁芬顿催化剂(gh-Al-MCM-41-Fe),利用比表面仪、扫描电子显微镜-X射线能谱(SEM-EDX)对催化剂进行了表征,考察了不同p H条件下该催化剂对苯酚的催化降解效能.结果表明,gh-Al-MCM-41-Fe催化剂具有介孔结构,表明颗粒分布均匀,石墨烯的掺杂减小了颗粒粒径,与多种催化剂(非介孔Al2O3-Cu Al2O4、介孔Al2O3-Cu、介孔Al2O3-Fe、介孔Al-MCM-41-Fe)相比,gh-Al-MCM-41-Fe具有最高的苯酚催化降解效能,反应符合一级反应特征,石墨烯的掺杂能明显提高苯酚降解率和COD去除率,减少铁的溶出,拓宽p H范围,当p H值为3—5,反应90 min,COD去除率达到60%以上.     

Ba/TiO2/MCM-41光催化降解对硝基苯甲酸

以钛酸丁酯为钛源、MCM-41分子筛为载体,采用溶胶-凝胶法制备了掺杂与负载相结合的光催化剂Ba/TiO2/MCM-41。结果表明:Ba/TiO2/MCM-41是一种比表面积高达341.2 m2/g的介孔材料,主要晶相为锐钛矿相,比P25有更强的紫外光吸收。将Ba/TiO2/MCM-41用于光催化氧化水中的对硝基苯甲酸,当催化剂投加量为0.5 g/L,对硝基苯甲酸初始pH为4、浓度为2×10-4mol/L时,紫外光照30 min后,对硝基苯甲酸降解率达到96.0%。用紫外光谱、红外光谱和高效液相色谱分析对硝基苯甲酸降解前后的变化,发现随着光照时间延长,苯环上的硝基、羧基吸收峰逐渐减弱;对硝基苯甲酸首先被降解为一些中间小分子产物,随着反应进行,小分子物质也逐渐被降解。     

Adsorption of basic dyes onto MCM-41

The adsorption of two basic dyes, Basic Green 5 (BG5) and Basic Violet 10 (BV10), onto MCM-41 was studied to examine the possible effect of interactions between large adsorbates and MCM-41 on the pore structure stability of MCM-41 and the potential of MCM-41 for the removal of basic dyes from wastewater. The revolutions of surface characteristics and pore structure of MCM-41 induced by dyes adsorption were characterized based on the analyses of the nitrogen isotherms, the XRD patterns, and the FTIR spectra. It was experimentally concluded that when the effect of interactions between large dyes (such as BV10) and MCM-41 on the pore structure stability of MCM-41 was insignificant, MCM-41 might be a good adsorbent for the removal of basic dyes from wastewater. The adsorption of BV10 on MCM-41 with respect to contact time, pH, and temperature was then measured to provide more information about the adsorption characteristics of MCM-41. Both Langmuir and Freundlich adsorption models were applied to describe the equilibrium isotherms and the pseudo-second-order kinetic model was used to describe the kinetic data, from which some adsorption thermodynamic parameters were also evaluated.     

镍改性MCM-41介孔分子筛对水中甲基蓝的吸附

通过水热法合成介孔分子筛MCM-41,采用等体积浸渍法制备了Ni负载MCM-41分子筛吸附剂(Ni/MCM-41).小角X-射线粉末衍射(XRD)表征结果显示,Ni/MCM-41保持了纯硅MCM-41有序的介孔结构,并研究了Ni/MCM-41对水中甲基蓝的吸附去除性能,考察了投加量、反应时间、p H值、温度对水中甲基蓝去除率的影响,并从吸附等温线探讨了吸附机理.在优化条件下(25℃,20 mg投加量,6.32 p H,50 mg·L-1甲基蓝),反应120 min后,Ni/MCM-41对甲基蓝吸附量为36.85 mg·g-1,是MCM-41的7.1倍.研究表明吸附等温线符合Freuulich和Dubinin-Radushkevich模型,最大吸附量随着温度的升高而升高,吸附为吸热过程.通过Zeta电位分析认为,静电作用是甲基蓝吸附的主要机理.