孔径分布和溶液浓度对碳气凝胶电极电吸附除盐性能的影响分析

在不同进水浓度下,采用两种比表面积相似但是孔径分布不同的碳气凝胶作为电极进行了一系列电吸附除盐平衡试验.结果表明,随着溶液浓度的变化,不同的孔径分布对碳气凝胶除盐效果影响不一样.其机理为双电层的存在,使得碳气凝胶空隙内的双电层扩散层相互叠加;同时,根据德拜定律,碳气凝胶空隙内的双电层扩散层在不同浓度溶液中厚度不同,从而使得双电层扩散层相互叠加的情况也随浓度变化而变化.这两种作用共同导致了实验结果.当溶液浓度为 0.01 mol·L-1时,选择主要孔径不小于20hm的碳气凝胶电极;当溶液浓度为 0.1 mol·L-1时,应选用主要孔径不小于 10nm 的材料;当溶液浓度为几 mol·L-1时.则分散层几乎消失,孔径大小对电吸附性能影响几乎不考虑.     

Estimation and characterization of PCDD/Fs and dioxin-like PCBs from Chinese iron foundries

The iron foundry industry is considered to be a potential source of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs). This study investigated the emission factors and total emission amounts of PCDD/Fs and dioxin-like polychlorinated biphenyls (DL-PCBs) from iron foundries in China. The concentrations and the World Health Organization toxicity equivalents (WHO-TEQs) are presented and the congener profiles are discussed in this paper.In the present work, 26 fly ash samples were collected and tested to quantify the PCDD/Fs and DL-PCBs generated by 14 plants of different scales, and five stack gas samples were collected from two (named as EFG and LFG) of those plants. The emission levels of PCDD/Fs and DL-PCBs indicated that hot-air cupolas had lower emissions than cold-air cupolas. When iron ore lump and sinter were used as raw material, the emission factors were about 250 ng TEQ t⁻¹ of product. However, if the raw material was scrap, the emission factors varied owing to the different contents of organic materials in the raw materials. It was found that the mean WHO-TEQ values of PCDD/Fs and DL-PCBs were 144 and 34.2 pg Nm⁻³ in stack gas and 20.0 and 1.58 pg g⁻¹ in fly ash. In multiple tests, it was estimated that the mean emission factors of PCDD/Fs and DL-PCBs were 365 and 10.9 ng WHO-TEQ t⁻¹ released to residue and 2719 and 555 ng TEQ t⁻¹ released to air. The total emission amounts of PCDD/Fs and DL-PCBs from Chinese iron foundries with cupola furnaces released to residue and air were 16.8 and 146 g WHO-TEQ in 2008, respectively.     

冶金炉重大危险源辨识及其爆炸事故后果模拟

冶金炉的铁水、钢水温度高,国内外多次发生冶金炉爆炸事故,但现阶段根据《重大危险源辨识》(GB18218-2000)和《关于开展重大危险源监督管理工作的指导意见》(安监管协调字[2004]56号文)还无法判定其是否为重大危险源.运用爆炸学、热学等方法,提出了判定冶金炉是否为重大危险源的理论与方法,并给出了判定高炉是否为重大危险源的临界有效容积,判定转炉、混铁炉是否为重大危险源的临界公称吨位,最后通过VB编程对冶金炉进行了爆炸事故后果模拟,为冶金企业提供一定的参考价值.     

电炉钢渣对水中Cu2+、Cd2+和Pb2+的去除作用

以宝钢电炉钢渣为研究对象,考察了钢渣对溶液中重金属离子Cu2+、Cd2+、Pb2+的吸附动力学、吸附等温线、吸附热力学特征,借助多种分析手段(XRD、BET比表面分析、SEM/EDS等)对钢渣进行了理化性能测试和表征.结果表明,电炉钢渣对重金属离子的吸附速率较快,吸附速率顺序为Cd2+>Pb2+>Cu2+,吸附过程符合一级动力学模型(R2>0.99).吸附等温实验结果表明,Langmuir模型较为适合重金属离子在钢渣上的吸附,实验条件下对Cu2+、Cd2+、Pb2+离子的最大吸附容量分别为0.101、0.058、0.120 mmol.g-1.3种重金属离子在钢渣上的吸附是一个吸热(ΔH0<0)、熵值增大(ΔS0>0)的自发反应过程(ΔG0<0),熵效应是吸附反应自发进行的主要驱动力.SEM/EDS分析结果揭示了吸附前后钢渣表面形貌和化学成分的变化.电炉钢渣以其低价、高效性在重金属废水处理中具有广阔的应用前景.     

Comparative study of microbial community structure in di erent filter media of constructed wetland

Comparisons of microbial community structure, in eight filter media of zeolites, anthracite, shale, vermiculite, ceramic filter media, gravel, steel slag and bio-ceramic, were undertaken by analyzing the phospholipid fatty acid (PLFA) composition. A total of 20 fatty acids in the range of C11 to C20 were determined but only 13 PLFAs were detected in steel slag. They consist of saturated fatty acids, branched fatty acids, monounsaturated fatty acids, and polyunsaturated fatty acids. The variation of fatty acids was revealed in the relative proportions of these fatty acids in di erent media. The aerobic prokaryotes were the predominant group in all media. The PLFA composition showed significant di erences among the eight di erent media by Tukey’s honestly test. It was found that steel slag was significantly di erent in the microbial community as compared to other filter media, probably due to its alkaline e uent. Steel slag alone is probably not a good choice of substratum in constructed wetlands. The principle components analysis (PCA) showed that zeolites, bio-ceramic, shale and vermiculite had a similar microbial community structure while steel slag and ceramic filter media were distinct from other media.     

熔融还原炼铁工艺环保可行性初步研究——以广州珠江钢铁为例

熔融还原炼铁技术是目前国内外高度重视的新一代炼铁技术,Corex和Hlsmelt是其中的代表工艺。文章就炼铁工艺在技术、环境、经济等方面有不同的要求而提出可行性判别指标,对Corex、HIsmelt与传统高炉工艺进行各判别指标的对比分析,并结合广州珠江钢铁有限责任公司现址建设炼铁项目这一实例从定性和定量的角度判别三种工艺的优劣,从而指出,对于珠钢现址,Corex和H／smelt比高炉技术更适应环保要求,更利于珠钢的未来发展,其中HIsmelt最具优势和竞争力。     

锰渣填埋场渗滤液及周边水体的水化学特征和质量评价

本文在分析锰渣填埋场区渗滤液及周边水体水化学组成的基础上,运用改进的水质量指数(WQI)进行了水质评价,阐述了填埋场渗滤液对下游水体的影响过程。结果表明,研究区渗滤液pH呈中性偏酸性,EC在1 780~44 500μS/cm之间,渗滤液中NH4-N、Mn2+、Mg2+、SO2-4、NO-3的浓度较高,并呈现SO2-4Mn2+Mg2+NH+4-N的特征,并且浓度与堆存时间呈负相关性。填埋场下游水体的重金属浓度微量,但NH4-N和Mn2+浓度较高,均超过GB 3838—2002和GB/T 14848—93规定的限值,其中2014年5月份某地下水的这两个参数分别超标243倍和488倍。改进的WQI指数评价结果显示,地表水的渗滤液水污染指数(LWPI)值在2.89~7.83之间,受影响的地下水为172,说明渗滤液已对锰渣填埋场下游水体造成严重影响。     

原油加热炉炉管剩余寿命评估

根据加热炉炉管温度分布,提出了加热炉炉管剩余寿命评估方法:即炉管蠕变损伤后剩余寿命的评估和腐蚀损伤后剩余寿命的评估,采用此方法对在用加热炉进行了评估,并对评价结果进行了验证.     

太阳模拟器大功率短弧氙灯放电特性试验测试

目的增强太阳模拟器氙灯驱动运行的可靠性,给太阳模拟器研制提供技术保障,针对太阳模拟器大功率短弧氙灯放电特性进行试验研究。方法设计太阳模拟器的大功率短弧氙灯放电特性测试方法,然后通过理论计算和实际测试验证氙灯电源初始电流对短弧氙灯放电特性的影响,并采用增设优化电路的方法对其放电特性进行改善。结果在初始电流为70 A和120 A两种情况下,弧光放电电流到达谷值以后的电流稳定度分别为1.8616和0.9867,增设优化电路后,再次进行短弧氙灯放电特性测量,将初始电流降低到60 A,而稳定度可达到0.5409。结论改善后的电路基本可实现短弧氙灯放电理想状态,完成了对短弧氙灯进入电流击穿阶段后形成的稳定弧光放电电流特性的优化,大大提升了氙灯点灯成功率,为增强太阳模拟器可靠性提供了试验支持。     

煤矸石的环境问题及其资源化利用

煤矸石是煤炭生产中的一种副产品,目前煤矿的排矸量约占煤炭开采量的10%~25%,煤矸石已成为我国累积堆积量和占用场地最多的工业废物。文中介绍了国内外煤矸石综合利用现状及工程利用的主要领域,并就如何提高我国煤矸石工程利用水平提出作者的观点。