Coupling a 3D patch model and a rockfall module to assess rockfall protection in mountain forests

Many forests in the Alps are acknowledged for protecting objects, such as (rail) roads, against rockfall. However, there is a lack of knowledge on efficient silvicultural strategies and interventions to maintain these forests at optimal protection level. Therefore, assessment tools are required that quantify the rockfall protection effect of forest stands over time, and thereby provide the ability to evaluate the necessity and effect of management interventions. This paper introduces such a tool that consists of a 3D rockfall module embedded in the patch based forest simulator PICUS. The latter is extended for this study with a new regeneration module. In a series of experiments the new combined simulation tool is evaluated with regard to parameter sensitivity, model intercomparison experiments with recently proposed algorithms from the literature, and the ability to respond realistically to different management regimes in rockfall protection forests. Results confirm the potential of the new tool for realistic simulation of rockfall activity in heterogeneous mountain forests, but point at the urgent need to improve the knowledge base on the interaction of understory and rockfall activity. Further work will focus on model validation against empirical rockfall data, and include reduced tree vitality due to damage from boulder collisions as well as the explicit consideration of downed dead wood.     

Scenario-visualization for the assessment of perceived green space qualities at the urban-rural fringe

The provision of green space is increasingly being perceived as an important factor for quality of life. However, green spaces often face high developmental pressure. The main objective of this study is to investigate a prospective approach to green space planning by combining three-dimensional (3D) visualization of green space scenarios and survey techniques to facilitate improved participation of the public. Aside from the ‘Status quo’, scenarios ‘Agriculture’, ‘Recreation’, ‘Nature conservation’ and ‘Wind turbines’ are visualized in three dimensions. In order to test responses, a survey was conducted both in print format and on the Internet. Overall, 49 different visualizations that belong to one of the scenarios were available in the survey and were rated according to the perceived esthetic, recreational and ecological values.The highest rated scenes include vegetation elements such as meadows with orchards, single trees, shrubs or forest. The least attractive scenes are those where buildings are highly dominant or where there are no vegetation elements.Based on the ratings for the individual images and on the corresponding scenarios, our study shows that there is high potential for improving the existing landscape. All suggested changes are either rated about equal to or considerably higher than the status quo, with the scenario ‘Nature conservation’ receiving the highest scores.     

气体扩散电极在水处理领域中的研究进展

气体扩散电极（Gas Diffusion Electrode—GDE）作为阴极,通过氧气还原产生过氧化氢（H202）,在亚铁离子催化剂存在的情况下形成Fenton试剂,从而间接氧化有机污染物,这方面的研究逐步引起人们的重视。本文综述了电极材料、电流密度、pH、催化剂等因素对处理效果的影响,提出了该方法存在的问题并对其发展趋势进行了展望。     

Relationships between anaerobic consortia and removal efficiencies in an UASB reactor degrading 2,4 dichlorophenol (DCP)

To gain more insight into the interactions between anaerobic bacteria and reactor performances (chemical oxygen demand-COD, 2,4 dichlorophenol-2,4 DCP removals, volatile fatty acid-VFA, and methane gas productions) and how they depended on operational conditions the microbial variations in the anaerobic granular sludge from an upflow anaerobic sludge blanket (UASB) reactor treating 2,4 DCP was studied. The study was composed of two parts. In the first part, the numbers of methanogens and acedogens in the anaerobic granular sludge were counted at different COD removal efficiencies. The relationships between the numbers of methanogens, the methane gas production and VFA production were investigated. The COD removal efficiencies increased to 74% from 30% while the number of total acedogens decreased to 10 from 30 cfu ml(-1). The number of total methanogens and acedogens varied between 11 x 10(3) and 10 x 10(9)MPN g(-1) and 10 and 30 cfu ml(-1) as the 2,4 DCP removal efficiencies were obtained between 60% and 99%, respectively. It was seen that, as the number of total acedogens decreased, the COD removal efficiencies increased. However, the number of total methanogens increased as the COD removal efficiencies increased. Correlations between the bacterial number and with the removal efficiencies obtained in different operational conditions were investigated. From the results presented in this paper a high correlation between the number of bacteria, COD removals, methane gas percentage, 2,4 DCP removals and VFA was observed. In the second part, methanogen bacteria in the anaerobic granular sludge were identified. Microbial observations and biochemical tests were applied to identify the anaerobic microorganisms from the anaerobic granular sludge. In the reactor treating 2,4 DCP, Methanobacterium bryantii, Methanobacterium formicicum, Methanobrevibacter smithii, Methanococcus voltae, Methanosarcina mazei, Methanosarcina acetivorans, Methanogenium bourgense and Methanospirillum hungatei were identified.     

Size distributions of fine and ultrafine particles in the city of Strasbourg: correlation between number of particles and concentrations of NO(x) and SO(2) gases and some soluble ions concentration determination

An Electrical Low Pressure Impactor (ELPI) was used during spring and autumn 2003 in the centre of Strasbourg for the measurement of atmospheric aerosols size distribution. The concentration of NO(x) and SO(2) in air was simultaneously measured with specific analysers. Samples were collected in the range 0.007-10 microm in equivalent aerodynamic diameter size. Number distributions are representative of a pollution originating from urban traffic with a particle size distribution exhibiting a nucleation mode below 29 nm and an accumulation mode around 80 nm in size. A mean particle density equal to 39000+/-35000 total particles per cm(3) with a size ranging from 7 to 10 microm was obtained after a sampling period of 2 weeks in spring. About 86.9% of the number of particles have an aerodynamic diameter below 0.1 microm and 13.1% between 0.1 and 1 microm. Correlation coefficients between the number of particles impacted on each ELPI plate and gas concentrations (SO(2) and NO(x)) showed that the numbers of particles with diameter between 0.10 and 0.62 microm are highly related to the NO(x) concentration. This result indicates that particles are traffic induced since NO(x) is mainly emitted by cars as shown by measurements on various sites. Particles are less clearly correlated to the SO(2) concentration. Particle analysis on different ELPI plates for a sampling period of 2 weeks in autumn showed high level of soluble NO(3)(-), SO(4)(2-) and NH(4)(+) ions. Indeed, up to 90% b.w. of these three species were found in the particle range 0.1-1 microm. The formation of particulate NH(4)NO(3) is favoured by high NO(x) concentration, which induces the formation of gaseous HNO(3).     

Development of a highly sensitive extractive spectrophotometric method for the determination of nickel(II) from environmental matrices using N-ethyl-3-carbazolecarboxaldehyde-3-thiosemicarbazone

Nickel(II) reacts with N-ethyl-3-carbazolecarboxaldehyde-3-thiosemicarbazone (ECCT) and forms a yellow colored complex, which was extracted into n-butanol from sodium acetate and acetic acid buffer at pH 6.0. The absorbance value of the Ni(II)-ECCT complex was measured at different intervals of time at 400nm, to ascertain the time stability of the complex. The extraction of the complex into the solvent was instantaneous and stable for more than 72h. The system obeyed Beer's law in the concentration range of 1.2-5.6mugml(-1) of nickel(II), with an excellent linearity and a correlation coefficient of 0.999. The molar absorptivity and Sandell's sensitivity of the extracted species were found to be 1.114x10(4)Lmol(-1)cm(-1) and 5.29x10(-3)mugcm(-2) at 400nm, respectively. Hence, a detailed study of the extraction of nickel(II) with ECCT has been undertaken with a view to developing a rapid and sensitive extractive spectrophotometric method for the determination of nickel(II) when present alone or in the presence of diverse ions which are usually associated with nickel(II) in environmental matrices like soil and industrial effluents. Various standard alloy samples (CM 247 LC, IN 718, BCS 233, 266, 253 and 251) have been tested for the determination of nickel for the purpose of validation of the present method. The results of the proposed method are comparable with those from atomic absorption spectrometry and were found to be in good agreement.     

三步法处理大港油田12井综合废水的实验研究

根据大港油田12井综合废水的污染特征,提出了"混凝-内电解-H2O2氧化"三步处理的方法。实验结果表明:三步法处理后可以使原水的CODcr从4930mg/L降低到128mg/L,去除率达到97%。处理后水质达到国家《污水综合排放标准》(GB8978-1996)二级标准要求。     

纳米TiO2的性能与应用研究

纳米二氧化钛(Nano-TiO2)因其具有粒径小、透明、紫外线吸收性能强以及优异的随角异色、光电催化和抗菌等优点而成为国内外科技工作者的研究热点。简要介绍了纳米TiO2的优异性能,详细论述了纳米TiO2在光催化处理污染物、抗菌剂、食品包装、药物添加剂、高级涂料、太阳能电池及防晒剂等方面的应用现状和研究进展,并对纳米TiO2的发展方向和应用前景进行了展望。     

Comparison of 85Kr and 3H Apparent Ground‐Water Ages for Source Water Vulnerability in the Collyer River Catchment,Maine1

Abstract: Apparent ground‐water ages as determined by the noble gas isotope ⁸⁵Kr and the water isotope ³H are compared. Refined gas extraction methodology at the wellhead permits efficient collection of Kr for ⁸⁵Kr isotope enrichment. ⁸⁵Kr isochrones elucidate areas of much younger ground‐water ages than ³H. Declining ³H activities in the catchment prevent its correlation with the youngest measured ⁸⁵Kr ages. Source water for most drinking water supplies in the Collyer River catchment is recharged within 40 years BP (2004). Mean‐age (τ) transport modeling suggests uncertainty of ground‐water ages is greatest in the central basin area.     

Effective EU and Member State policies for stimulating CCS

Although CO₂ capture and storage (CCS) is widely recognised as an option to mitigate climate change, consistent and effective EU policies to advance CCS are still absent. This paper discusses policy instruments for advancing large-scale deployment of CCS in the European Union, and evaluates them in a multi-criteria analysis. The EU Emissions Trading Scheme (EU-ETS) is a cost-effective instrument for limiting greenhouse gas emissions, but it is questionable whether its currently limited time horizon and short-trading periods will lead to substantial CCS diffusion. Complementary policies at the EU and the Member State level may repair this and provide sufficient incentives for CCS. Potential policies include financial instruments such as investment subsidies, a feed-in scheme, or a CO₂ price guarantee, as well as a CCS mandate or a low-carbon portfolio. These policy options differ with respect to their environmental effectiveness, possible interaction with the EU-ETS, costs and financial risk involved, and their competition with other mitigation options. Interactions between Member State policies and the EU-ETS are smaller in scope than those of EU-wide policies, but they are more likely to lead to displacement of financial resources from other low-carbon technologies. In addition, national policies may pose a significant part of the financial risk of CCS operations with Member States, reducing the operator's incentive to innovate. Overall, structural policies at the EU level, such as a mandate or a low-carbon portfolio standard would be more conducive for realising large-scale deployment of CCS across the EU as well as more acceptable to environmental organisations.