Recent Levels of Radionuclide Contamination in the Eastern Ural Radioactive Trace and Biological Effects in Local Populations of <Emphasis Type="Italic">Plantago major</Emphasis> L.

The results of the study have shown that the stocks of ⁹⁰Sr and ¹³⁷Cs in the frontal part of the EURT are 6700–15000 and 200–400 kBq/m², respectively. The coefficients of their accumulation in different herbaceous plant species in this impact zone are lower than in other areas. The accumulative capability of plants has probably decreased in the course of selection as an adaptation to the effect of radiation. The viability and growth parameters of Plantago major L. seeds from the EURT zone are similar to those of seeds from the background sample. Cenopopulations chronically exposed to radiation are characterized by a higher mutation rate in the progeny and an unstable response to additional acute irradiation in most characters studied. A high level of inbreeding is observed in all P. major cenopopulations of plantain. The cenopopulation of the impact zone is characterized by a lower variation of allozyme loci, which may be a result of stringent selection for individuals better adapted to the complex of conditions existing in its habitat.     

Do trace metal(loid)s in road soils pose health risks to tourists? A case of a highly-visited national park in China

Nowadays, more people tend to spend their recreational time in large national parks, and trace metal(loid)s in soils have attracted long-term attention due to their possible harm to human health. To investigate the pollution levels, potential sources and health risks of trace metal(loid)s in road soils, a total of eight trace metal(loid)s (including As, Cd, Cr, Cu, Ni, Pb, Zn and Hg) from 47 soil samples along roads were studied in the Huangshan National Park in Southeast China. The results showed that the concentrations of As, Cd, Pb, Zn and Hg appeared different degrees of pollution compared with their corresponding background values. According to the pollution indices, Hg and Cd were recognized as significant pollutants presenting moderate to high ecological risk. Combining principal component analysis and positive matrix factorization model, the results showed that traffic, industrial, agricultural and natural sources were the potential origins of trace metal(loid)s in this area, with contribution rates of 39.93%, 25.92%, 10.53% and 23.62%, respectively. Non-carcinogenic risks were all negligible, while the carcinogenic risk of As was higher than the limit (1 $\times$ 10⁻⁶). Moreover, children were more susceptible to trace metal(loid)s by ingestion which appeared to be a more important exposure pathway than dermal contact and inhalation. The contribution rates of different sources to non-carcinogenic risks and carcinogenic risks were similar among children and adults, while traffic and industrial sources have a significant impact on health risks. This study will give more insights to control the environmental risks of trace metal(loid)s in national parks.     

Associations of trace elements in aerosol at the south Adriatic coast

We applied statistical methods to the data of a 5-year sampling period to characterize the features of trace elements in airborne particulate matter at the South Adriatic Coast. The analysis of surface soil samples was also performed. The data were processed by cluster analysis, enrichment factor determination and receptor rose statistics. It is shown that the principal element association consists of Fe, Mn and Ti originating from surface material resuspension. Hg and Se were shown to originate from more complex natural and anthropogenic processes. A strong emission source of Cd and Se was identified in the SSE direction.Selected article from the Regional Symposium on Chemistry and Environment Krusevac, Serbia, June 2003, organized by Dr. Branimir Jovancicevic.     

Trace metal emissions from co-combustion of refuse derived and packaging derived fuels in a circulating fluidized bed boiler

Energy recovery from refuse derived fuels (RDF) and packaging derived fuels (PDF) is one option in integrated waste management. Nine RDF and PDF co-combustion tests with peat and coal in a circulating fluidized bed boiler were carried out in this work. Heavy metal emissions in flue gas and fly ash were measured. Multivariate data analyses were used to find out the most important parameters affecting metal emissions in the flue gas.

The results showed that total heavy metal emissions were low. Although RDF and PDF had more heavy metals than peat and coal, the multivariate data analysis showed that an increase of the RDF or PDF share in the fuel mixture up to 20% did not correlate directly with the metal emissions in the flue gas. Distribution of Cd, Cu, Zn and Sn between flue gas and fly ash correlated with each other. Injection of limestone to bind sulphur and chlorine did not have a significant effect on heavy metal emissions in the flue gas. Heavy metals concentrated on the fly ash, but all fly ashes passed the EPA-TCLP tests.     

Trace elements, organochlorines, polycyclic aromatic hydrocarbons, dioxins, and furans in lesser scaup wintering on the Indiana Harbor Canal

During the winter of 1993-94, male lesser scaup (Aythya affinis) were collected on the heavily polluted Indiana Harbor Canal (IHC), East Chicago, IN, USA, and examined for tissue contaminant levels. Lesser scaup collected on the IHC had higher concentrations of cadmium (Cd), mercury (Hg), selenium (Se), polychlorinated biphenyls (PCBs), selected organchlorine pesticides, polychlorinated dibenzodioxins, polychlorinated dibenzofurans, polycyclic aromatic hydrocarbons, and aliphatic hydrocarbons than reference birds. Of the scaup collected on the IHC, 44% had Cd concentrations in the liver considered above background for freshwater waterfowl (>3 microg/g dry wt.), 50% had Se concentrations in the liver above a level possibly harmful to the health of young and adult birds (>33 microg/g dry wt.), and 88% of the scaup carcasses exceeded the PCB human consumption guidelines for edible poultry in the USA (>3.0 microg/g lipid wt.). The ratio of pristane:n-heptadecane concentrations in 47% of lesser scaup collected on IHC was elevated above 1.0, which is indicative of chronic exposure to petroleum hydrocarbons.     

不同粒度飞灰中16种微量元素的含量分布

研究了不同粒级的燃煤飞灰中的Ｂａ、Ｂｅ、Ｃｄ、Ｃｒ、Ｃｕ、Ｈｇ、Ｌｉ、Ｍｎ、Ｎｉ、Ｐｂ、Ｓｒ、Ｔｉ、Ｖ、Ｚｎ、Ｚｒ元素的含量分布,煤中元素的含量比及富集因子。     

Particulate matter pollution in Kunshan High-Tech zone: Source apportionment with trace elements, plume evolution and its monitoring

Particulate matter(PM) in the Kunshan High-Tech zone is studied during a three-month campaign. PM and trace elements are measured by the online pollution monitoring, forecastwarning and source term retrieval system AS3. Hourly measured concentrations of PM_(10), PM_(2.5) and 16 trace elements in the PM_(2.5) section(Ca, Pb, Cu, Cl, V, Cr, Fe, Ti, Mn, Ni, Zn, Ga, As, Se, Sr, Ba)are focused. Source apportionment of trace elements by Positive Matrix Factorization modeling indicates that there are five major sources, including dust, industrial processing, traffic,combustion, and sea salt with contribution rate of 23.68%, 21.66%, 14.30%, 22.03%, and 6.89%,respectively. Prediction of plume dispersion from concrete plant and traffic emissions shows that PM_(10) pollution of concrete plant is three orders of magnitude more than that of the traffic. The influence range can extend to more than 3 km in 1 hr. Because the footprint of the industrial plumes is constantly moving according to the local meteorological conditions, the fixed monitoring sites scattered in a few hundred meters haven't captured the heaviest pollution plume at the local scale of a few km~2. As a more intensive monitoring network is not operationally possible, the use of online modeling gives accurate and quantitative information of plume location, which increases the spatial pollution monitoring capacity and improves the understanding of measurement data. These results indicate that the development of the AS3 system, which combines monitoring equipment and air pollution modeling systems, is beneficial to the real-time pollution monitoring in the industrial zone.     

RESEARCH: Comparison of Temporal Trends in Ambient and Compliance Trace Element and PCB Data in Pool 2 of the Mississippi River, USA, 1985–1995

6+ ), copper (Cu), lead (Pb), mercury (Hg), nickel (Ni), selenium (Se), zinc (Zn), and polychlorinated biphenyls (PCBs). Water-column, bed-sediment, and fish-tissue (fillets) data collected by five government agencies comprised the ambient data set; effluent data from five registered facilities comprised the compliance data set. The nonparametric Mann-Kendall trend test indicated that 33% of temporal trends in all data were statistically significant (P < 0.05). Possible reasons for this were low sample sizes, and a high percentage of samples below the analytical detection limit. Trends in compliance data were more distinct; most trace elements decreased significantly, probably due to improvements in wastewater treatment. Seven trace elements (Cr, Cd, Cu, Pb, Hg, Ni, and Zn) had statistically significant decreases in wastewater and portions of either or both ambient water and bed sediment. No trends were found in fish tissue. Inconsistency in trends between ambient and compliance data were often found for individual constituents, making overall similarity between the data sets difficult to determine. Logistical differences in monitoring programs, such as varying field and laboratory methods among agencies, made it difficult to assess ambient temporal trends.     

Trace metal contents of the pacific oyster (Crassostrea gigas) purchased from markets in Hong Kong

Arsenic, cadmium, chromium, and copper concentrations of the Pacific oyster,Crassostrea gigas, purchased from four different markets were determined in this project. In general, gill tissue had the highest proportion of metal contents (34%–67%) when compared with other tissue parts (mantle, viscera, and adductor muscle), except for arsenic, which showed the highest level in adductor muscle (44%). Smaller oysters (longitudinal length of soft body part less than 6 cm) had higher metal levels than larger ones (longitudinal length of soft body part more than 6 cm), except copper. None of the four metals examined showed an obvious seasonal trend, although cadmium levels seemed to be higher in autumn and winter months. Arsenic, cadmium, and copper levels in oysters purchased from different markets and different months obtained in the present study were higher when compared with past reports. Cadmium levels, as high as 10.98 mg/kg (dry weight basis) have been obtained. This approaches the safety limit that may be hazardous to human health. Continual monitoring of cadmium and other trace metals of toxicological significance to man in Hong Kong seafood is recommended.     

Geochemical forms of trace metals in mangrove sediments—Red Sea (Egypt)

Seven sediment samples from mangrove sediments of the Red Sea were taken in order to evaluate the possible contamination of the sediments by trace metals (iron (Fe), manganese (Mn), zinc (Zn), copper (Cu), lead (Pb) and cadmium (Cd)). Sequential extraction techniques were performed to study the different geochemical forms of these metals. X-ray diffraction analysis has been performed to correlate the mineralogical composition with the geochemical forms of the studied elements. The results of Fe and Mn contents indicate that they are in large part from lithogenous origin. The elevated concentrations are associated with the residual form ranged from 70 to 93% for Fe and 46 to 70% for Mn. The percentage of Zn, Cu, Cd and Pb in the non-residual form was much greater than that of the residual fractions. This reflects the high mobility and bioavailability of these metals in mangrove sediments of the Red Sea. X-ray diffraction analysis revealed the presence of silicate components including quartz, feldspars and clay minerals in some locality. Non-silicate components recorded in the study area as calcite as well as, Mg-calcite. Quantitatively both components i.e. silicate and carbonate varied according to their source material.