大型蚤标志酶用于城市二级出水毒性的评价

大型蚤是一种国际公认的标准实验生物,广泛应用于污水、地表水等水质毒性检测。毒性水平较低的城市二级出水,对大型蚤往往无急性毒性效应,而具有慢性毒性效应,但慢性毒性检测周期过长,因此探索一种更灵敏的指标,实现快速检测,对于控制二级出水的水质风险具有重要意义。本研究考察了大型蚤在短期暴露于城市二级出水条件下,其体内乙酰胆碱酯酶、超氧化物歧化酶、过氧化氢酶、ATP酶、羧酸酯酶和碱性磷酸酯酶的酶活变化特征,从中筛选出对二级出水毒性响应灵敏的标志酶指标。实验结果表明,碱性磷酸酯酶、过氧化氢酶对二级出水毒性响应相对较灵敏,具有成为标志酶的潜力,研究结果为城市二级出水生物毒性评价方法优化提供新的思路。     

再入飞行力热环境预测与试验技术研究进展

总结了近5年来再入飞行力热环境预测与试验技术的研究进展.针对高速绕流流场引起的宽频声振环境和瞬态热环境,调研了国内外在上述环境的数值模拟预测、等效模拟试验和试验观测方面的最新研究情况和目前仍面临的难点问题.重点介绍了中物院总体所围绕再入飞行力热环境预测与试验方面开展的研究工作和已取得的部分研究成果.提出了后续研究方向和...     

海河下游水体中DO与NH_3-N、COD_(Mn)相关关系探讨

本文应用近年来海河下游监测数据对ＤＯ与ＮＨ３Ｎ和ＣＯＤＭｎ进行一元线性回归，得到两回归方程：ＮＨ３Ｎ＝－１２８ＤＯ＋１０５４；ＣＯＤＭｎ＝－１１３ＤＯ＋１６９２。并经相关系数和回归系数显著性检验，表明在９９９％的置信水平下ＤＯ与ＮＨ３Ｎ和ＣＯＤＭｎ线性相关均极其显著     

火灾中植筋连接构件的抗火性能试验研究

为研究火灾中植筋连接构件的抗火性能,进行了35个化学植筋试件在不同温度下(25～200°C)的拉拔试验以及12个植筋连接混凝土构件的受火试验。拉拔试验重点研究了植筋胶的粘结力随温度变化的规律,以及不同温度下植筋胶的粘结—滑移关系,结果表明:随着温度升高,植筋胶的粘结力显著下降。植筋构件的受火试验中,考虑了植筋深度(15d,20d,d为钢筋直径)和保护层厚度(25、40、60mm)两种影响因素。首先对6个试件按ISO834标准升温曲线升温(荷载为常温下植筋构件设计承载力的10%),到指定时间后,加载至构件破坏失效,结果表明:植筋深度和保护层厚度对火灾中植筋连接构件的极限承载力均有重要影响。其后进行了6个构件的恒载升温试验(荷载为常温下常规植筋构件设计承载力的80%),直至构件破坏,结果表明:当保护层厚度小于40mm时,植筋深度和保护层厚度对耐火极限均有重要影响;当保护层厚度大于40mm时,对耐火极限的影响植筋深度要大于保护层厚度。     

膨胀土地基中大比例模型桩浸水试验研究

通过对埋设在膨胀土地基中的一试桩的长时间浸水试验观测，模拟了自然降雨气候条件下单桩位移、沿桩身轴力、侧摩阻力分布、地基胀缩及其时间变化等基桩一系列工作性状和桩-土共同作用规律。试验结果显示：桩顶位移呈现出先下沉后回升并最后趋于稳定的3阶段特征；桩身全长受拉，轴力沿桩身分布呈“波峰”形态。基桩的最大轴力位于桩的中下部，轴力峰值历经由小到大的过程；中性点在浸水过程中，其位置有从桩下部上移的现象；桩侧摩阻力与桩端阻力荷载分担比随时间呈现出先减小后增大并渐趋稳定的3阶段特征。研究结果对膨胀土地基中的桩基设计和施工提供了理论依据。     

钢桁架-钢筋混凝土管柱结构风参数试验研究

结构下部空旷,上部挡风墙承担的风荷载对结构下部产生较大作用。我国规范没有对该类结构及其顶部透气性A型架的风参数作具体规定。为解决工程设计中风参数取值问题,进行了刚性模型风洞试验研究,得到了不同工况下挡风墙、A型架、管柱的体型系数及挡风墙的阵风系数,分析了风机、周围建筑物、风向角对相关风参数的影响,给出了相关参数的建议值。并将试验结果与数值模拟计算结果进行了对比分析,结果表明,二者吻合较好,研究结果为工程设计提供了基础资料,可供同类工程参考。     

通惠河水质毒性监测与评价

采用分析水质理化指标，大型溲运动及生存抑制试验和蚕豆在微核试验，对通惠河水进行监测，并结合现场调查，评价通惠河水污染状况。表明，通惠河水污染较重，并具有一定遗传毒性。     

多因素影响下巷道变形特性数值模拟研究

基于FLAC3D有限差分软件对开挖深度、侧压力系数、断面形状等多因素影响下的巷道变形参数进行正交试验，根据正交试验分析结果，分别选取同一深度条件下的圆形、马蹄形、直墙拱形、矩形巷道进行模拟试验并以圆形巷道作为典型断面，对不同深度下的巷道变形特征进行模拟试验。研究结果表明:开挖深度对巷道开挖后的应力差变化影响明显，断面形状对巷道围岩内的塑性区深度和具有显著影响；巷道开挖后的塑性区深度和随形状指数增加而呈线性增长趋势，圆形巷道的塑性区深度和最小，矩形最大；应力差随着巷道开挖深度的增加呈线性增加，深部开采应重视巷道内的应力分布情况。     

AQUIFER PARAMETERS FROM CONSTANT DRAWDOWN NONSTEADY-LEAKY TYPE CURVES1

ABSTRACT: A drain function and set of type curves were defined for the mathematical solution that represents one-dimensional flow under nonsteady conditions in a leaky aquifer for the constant drawdown boundary condition. A match point procedure was developed for determining the aquifer parameters transmissivity, storage coefficient, and leakance based on the drain function and type curves. Use of the procedure is illustrated by an example that utilizes simulated aquifer drawdowns and flowrate data. The drain function and type curves developed in this investigation include the effects of leakage for the constant drawdown boundary condition, which is not included in the existing drain function and type curve found in the literature. Thus, a new set of type curves was developed that can be used to analyze drawdowns for one-dimensional flow in a leaky aquifer with constant drawdown at a line sink. Applications would include flow to a canal or river, drainage of agricultural lands, and dewatering associated with strip mining operations.     

Assessing the biodegradation potential of polymers in screening- and long-term test systems

This paper presents a test scheme for assessing the biodegradation potential of polymers, starting with aquatic screening systems (aerobic and anaerobic) and continuing to long-term systems. At the end of the scheme the material has to prove its behavior under the relevant disposal conditions. Aerobic screening was performed mainly under aquatic conditions, but also in soil, using BOD-respirometry. Carbon balances were performed to obtain a better evaluation of the biodegradation potential. Under anaerobic conditions, biodegradation in an aquatic medium was followed by measuring CH₄ and CO₂ production. Polymers not fully degraded in the screening systems were tested in aquarium systems for at least 1 year. Biodegradation was followed by monitoring the DOC released in the water, mass loss, and microbial growth on the samples and in the water as well as via FTIR spectroscopy and SEM pictures. Results are presented for the polymers PHB, PHBV, PCL, Mater-Bi AI05H and ZF03U, and Bioceta. By combining the data from the screening with the aquarium system, a good picture of the degradation behavior of the polymers is obtained.Paper presented at the Bio/Environmentally Degradable Polymer Society—Third National Meeting, June 6–8, 1994, Boston, Massachusetts.