民用飞机机载设备振动试验要求和应用分析(一) DO 160F/G民用固定翼飞机机载设备振动试验要求

阐述了民用飞机机载设备振动环境的特点和振动试验分类,归纳和汇总了DO 160F/G中的各类民用飞机机载设备的振动试验要求,包括振动谱、振动量值和试验持续时间等,并进行了分析和说明,以便于查阅和使用。最后对民用飞机机载设备振动试验方法的应用进行了概括,介绍了民用固定翼飞机的机载设备振动试验要求,按设备在机上的区域不同进行分类,详细地对比说明各个位置上设备的振动试验要求;介绍了民用直升机的机载设备振动试验要求。     

某型橡胶密封圈加速贮存试验设计与实践

目的针对某型橡胶密封圈开展加速贮存试验设计,并通过试验预测产品贮存寿命。方法通过分析橡胶密封圈在贮存使用环境下的失效机理,结合橡胶材料性能老化模型,在不改变失效机理、又不增加新的失效机理的前提下,以密封圈整件作为试验对象,用加大温度应力的试验方法加速产品失效过程,根据试验结果预计正常环境应力下的产品贮存寿命。结果采用温度应力作为加速贮存应力开展密封圈加速贮存试验方案设计和验证工作,评估得到其在贮存温度为20℃的环境中,贮存寿命可以达到16.97年,置信度大于0.95。结论以密封圈整件作为试验件,采用温度应力作为贮存敏感应力开展加速贮存试验,所评估得到的贮存寿命与产品已有的自然贮存寿命结果吻合得较好,试验状态更加真实,为橡胶密封圈更换周期提供参考依据,并为密封圈贮存寿命的定量评估提供了一种参考方法。     

环境应力筛选在反坦克导弹及火箭弹中的应用

目的针对工程实践经验和反坦克导弹及火箭弹武器装备,提出新的环境应力筛选条件,用于剔除装备的早期故障。方法结合反坦克导弹及火箭弹武器装备的特点,对GJB 1032进行科学裁剪,分别制定出反坦克及火箭弹的不同层次产品的环境应力筛选条件。结果通过分析试验验证,反坦克导弹及火箭弹实施环境应力筛选能够激发出产品的早期故障。结论环境应力筛选方案在某型反坦克武器及火箭弹武器装备中得到了成功应用。     

中国东中西部经济带的水环境库兹涅茨假说实证及其影响因素研究

“八五”至“十二五”期间,中国取得巨大的经济成果的同时带来了严重的水环境污染问题.文章分析了东中西部三大经济带经济发展及COD和氨氮两种主要水污染排放的差异,及其与经济发展的关系进行了EKC假说的实证研究.研究结果表明,部分污染物的拟合曲线尚处于上升阶段,未能出现典型的倒U型曲线,可能导致水环境质量恶化.环境基础设施建设、人口分布和产业结构等因素与COD和氨氮的排放量密切相关,因此,中国必须采取各种环境管理和技术手段,促使区域水污染物排放量指标与经济发展的拟合曲线出现转折点,改善水环境质量.     

火炮机械系统可靠性强化试验方案探讨

目的尝试将可靠性强化试验理论引入其可靠性研究中,提高火炮机械系统的可靠性。方法首先分析可靠性强化试验的发展动态及其应用于机械系统的必要性,而后在对其理论依据进行分析的基础上,明确火炮机械系统可靠性强化试验研究的目的。结果依据火炮机械系统的主要失效模式,制定了包含机械工作原理分析等7个步骤的可靠性强化试验方案,详细分析了各环节的内容及作用。结论研究结果为可靠性强化试验在火炮机械系统中的应用提供一定理论支撑。     

Experimental investigation of the effect of occupant characteristics on contemporary seat belt payout behavior in frontal impacts

Objective: The goal of this study was to investigate the influence of the occupant characteristics on seat belt force vs. payout behavior based on experiment data from different configurations in frontal impacts.

Methods: The data set reviewed consists of 58 frontal sled tests using several anthropomorphic test devices (ATDs) and postmortem human subjects (PMHS), restrained by different belt systems (standard belt, SB; force-limiting belt, FLB) at 2 impact severities (48 and 29 km/h). The seat belt behavior was characterized in terms of the shoulder belt force vs. belt payout behavior. A univariate linear regression was used to assess the factor significance of the occupant body mass or stature on the peak tension force and gross belt payout.

Results: With the SB, the seat belt behavior obtained by the ATDs exhibited similar force slopes regardless of the occupant size and impact severities, whereas those obtained by the PMHS were varied. Under the 48 km/h impact, the peak tension force and gross belt payout obtained by ATDs was highly correlated to the occupant stature (P =.03, P =.02) and body mass (P =.05, P =.04), though no statistical difference with the stature or body mass were noticed for the PMHS (peak force: P =.09, P =.42; gross payout: P =.40, P =.48). With the FLB under the 48 km/h impact, highly linear relationships were noticed between the occupant body mass and the peak tension force (R² = 0.9782) and between the gross payout and stature (R² = 0.9232) regardless of the occupant types.

Conclusions: The analysis indicated that the PMHS characteristics showed a significant influence on the belt response, whereas the belt response obtained with the ATDs was more reproducible. The potential cause included the occupant anthropometry, body mass distribution, and relative motion among body segments specific to the population variance. This study provided a primary data source to understand the biomechanical interaction of the occupant with the restraint system. Further research is necessary to consider these effects in the computational studies and optimized design of the restraint system in a more realistic manner.     

基于AVI技术的环境试验过程监控方法设计

对计算机视觉检测在国内外工业智能检测领域的研究应用现状进行了综述,同时创新地提出了一种基于图像识别技术的环境试验过程监控方法,并初步验证了其可行性。     

土工格栅拉拔试验模型优化及加筋特性研究

目前土工格栅加筋提高工程的安全性广受关注,为研究土工格栅摩擦系数、网孔尺寸对其加筋特性的影响,采用PFC3D建立土工格栅拉伸试验模型和拉拔试验模型,并对2种试验模型进行优化。将土工格栅拉伸应力-应变关系按其应变量分段,开发了记录试验过程中土工格栅的应变并根据该应变与分段界限应变间大小关系来改变格栅的法向、切向黏结刚度的FISH程序。在保持土工格栅试样尺寸及各参数不变的条件下,分别开展不同格栅摩擦系数和不同网孔尺寸的数值拉拔试验。结果表明:按土工格栅应变量对其拉伸特性进行分阶段模拟的方法可使模拟结果更加准确;优化后的土工格栅拉拔试验模型计算结果与室内试验结果更加吻合;土工格栅的摩擦系数及网孔尺寸对加筋特性的影响明显,孔径比为5. 0左右时的加筋效果最佳。建议在选用加筋材料时应考虑土工格栅摩擦系数和网孔尺寸与填料粒径之间的匹配关系。     

Assessment of mutagenic potency of source water treated by ozone and adsorption processes

This research utilized the Ames test to determine the mutagenicity of water treated by advanced processes, including ozonation and granular activated carbon (GAC). Raw water samples for this research included those obtained from the Pan Hsin waterworks as well as samples containing humic acids. Treated samples were collected from the pilot‐scale advanced treatment plant. The Ames test was used to measure the mutagenicity of the water after each treatment process. For the Pan Hsin raw water samples treated with ozone or GAC, it was indicated that, regardless of whether samples were preozonated or not, they all showed a mutagenic potency less than 2 once the S9 enzyme was added. This level of mutagenicity is insignificant. The prepared humic acid samples, on the other hand, demonstrated a significant reduction in mutagenicity after the pre‐ozonation process, indicating that preozonation can lower the degree of mutagenicity. Furthermore, the mutagenicity of the prepared humic acid samples gradually decreased after the advanced treatment process. However, when chlorine was added later to these samples, the mutagenicity increased again. This research shows that the use of O3/GAC processes to treat water can successfully lower mutagenicity, indicating a great potential for applications in the treatment of drinking water.     

Bivariate cointegration between poverty and environment: a case study of Pakistan (1980–2009)

The objective of this paper is to empirically investigate a two-way statistical relationship between the agriculture environment and rural poverty. To recognise the relationship between the two variables, a time series, co-integration and Granger causality tests have been employed. Secondary data pertaining to Pakistan from 1980–2009 on rural poverty and environmental factors (such as commercial energy consumption, water availability and total cropped area) have been used for the analysis. The empirical results only moderately support the conventional view that rural poverty has a significant long-term casual effect on environmental proxies in Pakistan. The present study finds evidence of uni-directional causality between poverty and the environment in the context of the agriculture sector in Pakistan.