聚苯乙烯基硫代磺酸钾树脂的合成及其与卤代烃的反应

由聚苯乙烯基磺酰氯树脂与硫化氢钾反应制备聚苯乙烯基硫代磺酸钾树脂（Ｉ）,树脂Ｉ与亲电的卤代烃反应,生成聚苯乙烯基硫代磺酸酯树脂（Ⅱ）,树脂Ⅱ经过乙硫醇处理,使卤代烃结构部分以不对称二硫醚的形式游离下来,用ＧＣ／ＭＳ对其结构进行鉴定。从不对称二硫醚的结构可推导出原卤代烃的结构,所制备的聚苯乙烯基硫代磺酸钾树脂的转化效率为１．１１ｍｍｏｌ·ｇ＾－１。     

Heavy metal contamination in the vicinity of an industrial area near Bucharest

BACKGROUND, AIMS AND SCOPE: Chromium enters into the aquatic environment as a result of effluent discharge from steel works, electroplating, leather tanning industries and chemical industries. As the Cr(VI) is very harmful to living organisms, it should be quickly removed from the environment when it happens to be contaminated. Therefore, the aim of this laboratory research was to develop a rapid, simple and adaptable solvent extraction system to quantitatively remove Cr(VI) from polluted waters. METHODS: Aqueous salt-solutions containing Cr(VI) as CrO4(2-) at ppm level (4-6 ppm) were prepared. Equal volumes (5 ml) of aqueous and organic (2-PrOH) phases were mixed in a 10 ml centrifuge tube for 15 min, centrifuged and separated. Concentrations of Cr(VI), in both the aqueous and organic phases, were determined by atomic absorption spectrometry. The effects of salt and acid concentrations, and phase-contact time on the extraction of Cr(VI) were investigated. In addition, the extraction of Cr(VI) was assessed in the presence of tetramethylammonium chloride (TMAC) in 2-PrOH phase. Effects of some other metals, (Cd(II), Co(II), Cu(II), Ni(II) and Zn(II)), on the extraction of Cr(VI) were also investigated. RESULTS AND DISCUSSION: The Cr(VI) at ppm level was extracted quantitatively by salting-out the homogeneous system of water and 2-propanol(2-PrOH) using chloride salts, namely CaCl2 or NaCl, under acidic chloride media. The extracted chemical species of Cr(VI) was confirmed to be the CrO3Cl-. The ion-pair complex extracted into the organic phase was rationalized as the solvated ion-pair complex of [2-PrOH2+, CrO3Cl-]. The complex was no longer stable. It implied the reaction between extracted species. Studies revealed that salts and acid directly participated in the formation of the above complex. Use of extracting agents (TMAC) didn't show any significant effect on the extraction of Cr(VI) under high salting-out conditions. There is no significant interference effect on the extraction of Cr(VI) by the presence of other metals. The Cr(VI) in the organic phase was back-extracted using an aqueous ammonia solution (1.6 mol dm(-3)) containing 3 mol dm(-3) NaCl. The extraction mechanism of Cr(VI) is also discussed. CONCLUSIONS: Salting-out of homogeneous mixed solvent of 2-propanol can be employed to extract Cr(VI) quantitatively, as an ion-pair of [2-PrOH2+ * CrO3Cl-] solvated by 2-PrOH molecules. Then, the complex becomes 'solvent-like' and is readily separated into the organic phase. The increase of Cl- ion concentration in the aqueous phase favors the extraction. The 2-PrOH, salts and acid play important roles in the extraction process. There is no need to use an extracting agent at a high salting-out condition. RECOMMENDATIONS AND PERSPECTIVES: Chromium(VI) must be quickly removed before it enters into the natural cycle. As the 2-PrOH is water-miscible in any proportion, ion-pairing between 2-PrOH2+ and CrO3Cl- becomes very fast. As a result, Cr(VI) can easily be extracted. Therefore, the method is recommended as a simple, rapid and adaptable method to quickly separate Cr(VI) from aqueous samples.     

硝化污泥低温冲击强化试验

采用完全好氧式膜生物反应器富集耐低温硝化污泥,通过低温冲击强化试验研究硝化污泥的耐低温特性.结果表明,低温对硝化污泥中微生物的群落多样性影响较大,温度越低,微生物多样性越低.低温强化组投加了耐低温高硝化菌含量硝化污泥,使得硝化菌在反应器内生长趋势良好,对低温冲击的恢复更有效果,且低温硝化污泥比中温硝化污泥具有更好的氨氮...     

西部某气田井场分离器液相管线法兰腐蚀原因分析

目的 解决西部某气田井场分离器液相出口管线法兰严重腐蚀问题。方法 通过宏观形貌观察、无损检测、化学成分分析、金相组织分析、力学性能测试、腐蚀区域微观形貌观察、腐蚀产物物相分析以及腐蚀电化学实验的方法,分析该法兰发生腐蚀的原因。结果 A105制法兰与316L制密封圈存在较强的电偶腐蚀倾向。结论 电偶腐蚀是导致法兰面严重腐蚀的主要原因,另外,液相管线停用前放空不彻底,法兰底部存在积液,导致气液界面位置叠加发生水线腐蚀。根据法兰腐蚀原因提出了针对性的防腐建议。     

工程塑料环境因素与载荷应力耦合作用试验装置研究

目的 设计一种能够模拟工程塑料实际服役工作环境的试验装置,在多型自然环境中,构建兼具环境因素侵蚀与载荷应力耦合作用的试验条件。方法 研制工程塑料环境因素与载荷应力协同作用试验装置,采用包括拉伸加载、弯曲加载、控制系统等组件的模块化设计,实现0.01~16 Hz加载频率的拉伸及弯曲载荷,最大1 550 kg的拉伸载荷,最大375 kg的弯曲载荷。结果 将研制完成的试验装置置于多型自然环境下对试验施加恒定和交变载荷,以真实模拟工程塑料实际服役中的环境因素与载荷应力协同作用。结论 试验装置制造加工难度小,结构稳定可靠,可用于评价和研究工程塑料等系列类型材料的环境损伤性能演变。     

风险评价标准值初探

提出了风险指标和ALARP原则的含义,从风险评价的ALARP原则出发,得出个人风险评价标准值和社会风险评价标准值的制定方法。     

UASB反应器处理染料及印染废水的研究进展

综述了国内外UASB反应器处理染料及印染废水的研究概况.分析了UASB反应器处理废水存在的问题,并给出了相应的建议.展望了UASB反应器处理染料及印染废水的发展趋势,指出厌氧UASB-好氧法组合工艺是目前处理染料及印染废水的一种经济而有效的方法.     

建立良好有序的环保产业发展机制

论述了环保产业范围的不确定性、分布性、广泛性、依赖性、公益性，及产业市场的风险性，提出了发展我国环保产业的基本思路和原则。     

大麻茎腐病菌的分离及其对土壤环境影响的研究

从病变部位分离出两株病原真菌DN1和DN2,通过茵丝及孢子形态的观察,初步确定其分别为半知菌亚门链格孢属（Altemaria altemata）及轮枝孢属（M．Verticillium）。在pH值4～14之间,两株菌都能正常生长,对环境的适应能力较强。通过盆栽试验确定大麻对土壤pH的影响,结果表明大麻能修复弱碱性土壤。     

从环境立法进程展望中国大气污染防治战略的发展方向2002年9月12日在能源与环境中美研讨会上的讲话

本文从中国环境立法，特别是再次修改《大气污染防治法》等展望中国大气污染防治的重要战略方向。