旋幕式排风罩收集电焊烟尘的数值模拟

为解决电焊烟尘气流无组织排放对焊工健康和环境造成的严重影响,得出旋幕式排风罩的最佳设计参数及气流组织形式,选择GAMBIT软件建立排风罩的物理模型并进行网格划分,选用雷诺平均N-S方程(RANS)、Realizableκ-ε湍流模型及DPM离散相模型,利用Fluent计算流体力学软件对旋幕式排风罩捕集效率的相关参数进行模拟计算。结果表明:旋幕式排风罩能有效控制电焊烟尘气流的扩散;喷口角度对涡流产生的大小、位置和强度影响最大;最佳设计参数为有效吸程1. 5 m,喷口角度80°,喷口宽度14 mm;在该设计参数条件下,当罩面吸口风速为0. 3 m/s、喷口风速为1. 1m/s时,捕集效率达到最高,为98. 28%。     

A comparative analysis of safety management and safety performance in twelve construction projects

IntroductionSafety management in construction is complicated due to the complex “nature” of the construction industry. The aim of this research was to identify safety management factors (e.g., risk management and site management), contextual factors (e.g., organisational complexity) and combinations of such factors connected to safety performance. Method: Twelve construction projects were selected to compare their safety management and safety performance. An analytical framework was developed based on previous research, regulations, and standards where each management factor was defined. We employed qualitative comparative analysis (QCA) to produce case knowledge, compare the cases, and identify connections between the factors and safety performance. The material collected and analyzed included, for example, construction planning documents, reports from OHS-inspections, safety indicators, and interviews with project leaders and OHS experts. Results and conclusions: The research showed that: (a) the average score on 12 safety management factors was higher among projects with high safety performance compared to projects with low safety performance; (b) high safety performance can be achieved with both high and low construction complexity and organizational complexity, but these factors complicate coordination of actors and operations; (c) it is possible to achieve high safety performance despite relatively poor performance on many safety management factors; (d) eight safety management factors were found to be “necessary” for high safety performance, namely roles and responsibilities, project management, OHS management and integration, safety climate, learning, site management, staff management, and operative risk management. Site management, operative risk management, and staff management were the three factors most strongly connected to safety performance. Practical implications: Construction stakeholders should understand that the ability to achieve high safety performance in construction projects is connected to key safety management factors, contextual factors, and combinations of such factors.     

广州市感潮水源河段重金属分布特征及健康风险评价

对广州市沙湾水道(感潮河流型饮用水源地)涨、退潮期间13个断面7种重金属含量进行监测,并应用化学致癌和化学非致癌健康风险评价模型对该感潮河段重金属进行健康风险评价,研究该感潮河段重金属含量及其健康风险的时空分布特征。结果表明:该感潮河段重金属具有显著的空间分布差异,而感潮作用对重金属含量的影响并不明显;该感潮河段化学非致癌重金属污染物健康风险值相对较低,Cu、Hg、Zn的年平均风险值为10-10a-1,远远低于瑞典、荷兰、英国推荐的可接受限值,而化学致癌重金属污染物所引起的人体健康危害较高,化学致癌重金属污染物As、Cd的年平均风险值分别为10-5 a-1和10-6 a-1,其中Cd的年平均风险值与瑞典、荷兰、英国推荐的可接受限值接近(1×10-6 a-1),As的年平均风险值接近国际(ICRP)推荐值(5×10-5 a-1),致癌风险极大,应优先加以控制。     

Drivers for OSH interventions in small and medium-sized enterprises

The debate concerning occupational safety and health (OSH) interventions has recently focused on the need of improving the evaluation of interventions, and in particular on the need for providing information about why the intervention worked or not, under what circumstances and in which context. Key concepts in the analysis of the context are the drivers, i.e., those factors enabling, fostering or facilitating OSH interventions. However, the concept of driver for an OSH intervention is both confused and contested. Although the term is widely used, there is little consensus on how drivers should be understood, how important they are in different contexts and how they can facilitate interventions. This exploratory study based on interviews with the owner-managers and the safety officers of small and medium-sized enterprises (SMEs) gives an overview of the most characteristic drivers for OSH interventions. The results will be used to make an initial evaluation of SMEs' needs, and will help orient interventions and future research.     

The concept of resilience in OSH management: a review of approaches

The concept of resilience has become very popular, especially in the 21st century. This concept is applicable to many fields, from mechanics to a broad range of social sciences. Resilience has even become part of the national and global policies of the USA, the United Nations and the European Commission. The concept of resilience has also been implemented in the area of safety and health based on the criticism of the traditional approach to occupational safety and health, which does not result in a satisfactory level of occupational safety. The concept of resilience was adopted to research occupational safety and health in different fields and thus with different approaches, such as via socio-technical studies, the psychological and behavioral aspects of organizational resilience and the link with research on individual or family resilience and its influence on work.     

An investigation of safety climate in OHSAS 18001-certified and non-certified organizations

Many organizations worldwide have implemented Occupational Health and Safety Assessment Series (OHSAS) 18001 in their premises because of the assumed positive effects of this standard on safety. Few studies have analyzed the effect of the safety climate in OHSAS 18001-certified organizations. This case–control study used a new safety climate questionnaire to evaluate three OHSAS 18001-certified and three non-certified manufacturing companies in Iran. Hierarchical regression indicated that the safety climate was influenced by OHSAS implementation and by safety training. Employees who received safety training had better perceptions of the safety climate and its dimensions than other respondents within the certified companies. This study found that the implementation of OHSAS 18001 does not guarantee improvement of the safety climate. This study also emphasizes the need for high-quality safety training for employees of the certified companies to improve the safety climate.     

Facilitators and barriers to occupational health and safety in small and medium-sized enterprises: a descriptive exploratory study in Ontario,Canada

Purpose. The purpose of this particular study was to test a newly created instrument in describing the facilitators and barriers to occupational health and safety in small and medium-sized enterprises (SMEs) in Ontario, Canada. Methods. A cross-sectional design was used to identify the occupational health and safety culture of SMEs in public and private sectors in Ontario. Results. A total of 153 questionnaires were completed. The majority of respondents were female (84%) with a mean age of 49.8 years (SD 10.6). Seventy-four percent were supervisors. Seventy percent of respondents were from the private sector while 30% derived from the public sector including healthcare, community services, and non-profit organizations. Further, conducting regular external safety inspections of the workplace was found to be statistically associated with a safe work environment 2.88 95% CI [1.57, 5.27]. Conclusions. Strategies and training opportunities that focus on how to adapt occupational health and safety legislation to the nature and diversity of SMEs are recommended. Furthermore, employers may use such information to improve safety in their SMEs, while researchers can hopefully use such evidence to develop interventions that are applicable to meeting the occupational health and safety needs of SMEs.     

An airport occupational health and safety management system from the OHSAS 18001 perspective

Occupational health and safety represents a set of technical, medical, legal, psychological, pedagogical and other measures with the aim to detect and eliminate hazards that threaten the lives and health of employees. These measures should be applied in a systematic way. Therefore, the aim of this study is to review occupational health and safety legislation in Serbia and the requirements that airports should fulfill for Occupational Health and Safety Assessment Series certification. Analyzing the specificity of airport activities and injuries as their outcomes, the article also proposes preventive measures for the health and safety of employees. Furthermore, the airport activities which are the most important from the standpoint of risks are defined, as the goals for occupational health and safety performance improvement.     

A new approach to road accident rescue

Objective: This article develops and validates a new methodology and tool for rescue assistance in traffic accidents, with the aim of improving its efficiency and safety in the evacuation of people, reducing the number of victims in road accidents.

Method: Different tests supported by professionals and experts have been designed under different circumstances and with different categories of damaged vehicles coming from real accidents and simulated trapped victims in order to calibrate and refine the proposed methodology and tool.

Results: To validate this new approach, a tool called App_Rescue has been developed. This tool is based on the use of a computer system that allows an efficient access to the technical information of the vehicle and sanitary information of the common passengers. The time spent during rescue using the standard protocol and the proposed method was compared.

Conclusion: This rescue assistance system allows us to make vital information accessible in posttrauma care services, improving the effectiveness of interventions by the emergency services, reducing the rescue time and therefore minimizing the consequences involved and the number of victims. This could often mean saving lives. In the different simulated rescue operations, the rescue time has been reduced an average of 14%.     

Effects of customized foot orthoses on manufacturing workers in the metal industry

This 8-week study evaluates the effects of customized foot orthoses on work-related musculoskeletal disorders (WMSDs) of metal industry workers. These WMSDs were evaluated applying the Nordic musculoskeletal questionnaire (NMQ) at three different times (start, 4th week and 8th week) and additional questions were also formulated to obtain information about adaptation, fatigue, comfort and possible improvements. According to the NMQ results, statistical significance was found in the improvements after 4?weeks (p?<?0.05 in two areas, p?<?0.01 in three areas, p?<?0.001 in two areas and no significance in the other two) and after 8?weeks (p?<?0.01 in three areas, p?<?0.001 in four areas and no significance in the other two). The additional questions indicated fatigue reduction (both in general and in lower extremity), comfort level increase (after the adaptation period) and good acceptance, according to workers’ answers, suggesting customized orthoses can be effective in reducing and preventing WMSDs in several body regions.