不同构造环境中双峰式火山岩的地球化学特征

近年来的研究表明 ,双峰式火山岩套可以形成于大陆裂谷、洋内岛弧、活动大陆边缘、弧后盆地等多种环境。Sm -Nd同位素与不活动微量元素 (REE ,Zr ,Ti,Th ,Nb等 )相结合 ,进行综合研究 ,可帮助判断双峰式火山岩套成因和形成环境。本文总结了不同环境产出的双峰式火山岩组合的岩石学和微量元素、稀土元素、同位素地球化学特征 ,并根据对北祁连边马沟双峰式火山岩研究提出了其形成环境可能为岛弧环境 ,这一认识对探讨该地区造山带演化的地球动力学具有一定的意义 ,对在该地区的找矿工作也有一定的启发。     

两种典型大气环境下7A85铝合金的腐蚀行为研究

目的研究湿热海洋、干热沙漠两种典型大气环境对7A85铝合金腐蚀行为的影响。方法在万宁、敦煌两种典型环境中开展7A85铝合金大气暴露试验,利用金相显微镜分析7A85铝合金在我国两种典型大气环境中的腐蚀特征,定期测试该材料的拉伸强度和腐蚀深度。结果暴露3 a,7A85铝合金湿热海洋、干热沙漠两种典型大气环境中的最大腐蚀深度分别为254、90μm,抗拉强度分别下降了18%和5%,断后伸长率分别下降了72%和22%。结论 7A85铝合金暴露于相对湿度较低的干热沙漠环境,表面形成的腐蚀产物膜会阻止腐蚀的进一步发生;暴露于湿热海洋大气环境,随暴露时间的延长,7A85铝合金腐蚀逐渐加深。     

Fe-20Mn-4Si-2Al高锰钢热加工性能研究

目的研究Fe-20Mn-4Si-2Al高锰钢在850~1050℃,不同应变速率条件下的热变形行为。方法将实验钢锭热轧成10 mm厚板材,然后取样在MMS-300多功能热模式试验机上进行单轴热压缩实验。根据获取的应力-应变曲线及微观组织演变规律,系统研究Fe-Mn-Si-Al系高锰钢的热变形行为。结果应变速率是影响Fe-Mn-Si-Al系高锰钢热变形行为的关键因素。在热变形过程中,应变速率越低,Fe-20Mn-4Si-2Al高锰钢越容易发生动态再结晶。获得了实验钢的表观应力指数n=3.10,热变形激活能Q=412.151 kJ/mol,并建立了热加工方程。结论当参数Z≤8.351×10~(17)时,Fe-20Mn-4Si-2Al高锰钢热加工性能较好。     

两种老化温度对某型双基推进剂的热分解性能的影响

目的探索某型双基推进剂在85℃和95℃条件下的热分解性能随老化时间的变化趋势。方法采用恒温加速老化试验,并对老化不同时间的样品进行热重分析(TG)和差示扫描(DSC)试验。结果计算了其两种老化温度条件下的动力学参数。结论某型双基推进剂性能良好,与老化时间相比,老化温度对其性能影响较大。     

热磨试间火灾爆炸风险分析

采用层次分析法对热磨试间火灾爆炸风险进行分析,以某企业热磨试间内热磨合作业过程为例建立了评价模型。为提高层次分析法的准确性和有效性,在层次分析法之前,引入事故树,通过事故树确定各级指标,在层次分析法之后,通过与模糊数学相结合,对模型进行模糊评价,得出模型所处等级D=0.7087,即该企业热磨试间火灾爆炸风险为"危险性较大"等级。研究表明,"事故树-模糊层次分析法"应用于热磨试间火灾爆炸风险分析是可行的,有助于企业有针对性地制定安全措施,预防热磨试间火灾爆炸事故的发生。     

Eco-design improvement for the diaphragm forming process

This paper proposes an eco-design method to suggest improvements over an existing diaphragm forming process (DFP). In the proposed method, a systematic procedure is developed to provide eco-design guidance to engineers, and it includes four steps. In Step 1, design functions are analysed through functional diagrams to provide the information of sub-functions and functional flows. In Step 2, the eco-design requirements are captured via quality functional deployment (QFD) and then translated to design functions via functional analysis (FA). Then, the design functions are prioritized according to the eco-design requirements in considerations. In Step 3, the prioritized design functions are used to generate possible design concepts through the morphological chart. In Step 4, the generated concepts are assessed based on the energy use and process time of DFP. The utility of the proposed method is to adapt quality tools for continual improvements in the context of eco-design. An existing DFP is used for this work to demonstrate and validate the method’s applicability. The result of this research shows that the integration of QFD and FA can systematically guide the generation of new eco-design concepts for DFP with less dependence of design intuitions.     

钢线拉丝及表面处理生产线成套装备

主要论述了一种钢线拉丝及表面处理生产线成套装备的设计。该生产线的生产方式是多根钢线在牵引动力系统的作用下依次穿过各种处理设备,完成各道工序,实现钢线完成表面处理的目的。这个生产过程中,钢线可以完成放线、脱脂、退火、镀镍、造膜、烘干及收线一体化的工序。采用立体式布置,空间利用更为合理。     

The development of a microscale strain measurement system applied to sheet bulge hydroforming

Micro and multiscale sheet metal forming processes represent new and attractive solutions to many manufacturing problems. However, evaluating the strains in these products is a difficult endeavor. Larger organizations are utilizing commercially available microscale digital image correlation systems to measure the strains in microscale parts or on macroscale parts with critical microscale features. The cost of these strain measurement systems is preventing smaller research and development organizations from entering this challenging area or they are forgoing the ability to determine strains. The present paper describes the development of a method for creating microscale grids and measuring strains on microscale parts or microscale locations on larger parts. The method developed was able to measure true strains up to 0.618 for square grids that are 127 μm measured from center-to-center. Microscale strains resulting from sheet bulge hydroforming experiments using 11 mm, 5 mm, and 1 mm diameter dies were evaluated and material properties of the sheet metal were estimated based upon the strains measured in conjunction with FEA simulations and compared to analytical solutions and microscale tension tests. The material properties determined using the strains and FEM approach were consistent with the other methods.     

浅谈原油管道用火安全技术与措施

介绍了原油管道用火作业的特点，对原油管道用火作业的安全技术方法和措施进行分析，为今后原油管道用火作业技术提供了经验借鉴。     

热盐腐蚀环境对TC11钛合金高温寿命影响规律试验研究

目的 针对发动机钛合金部件在热盐环境与工作载荷下的寿命衰减问题，开展TC11钛合金热盐腐蚀疲劳与应力腐蚀试验，研究腐蚀环境下TC11的高温寿命衰减规律与失效机理。方法 利用喷盐法制备TC11钛合金试验件，研究不同温度与应力水平对TC11腐蚀疲劳以及应力腐蚀的影响规律。利用SEM等观测手段，开展腐蚀疲劳以及应力腐蚀试样断口与表面的形貌分析，分析腐蚀环境下的失效机理。结果 热盐腐蚀环境导致TC11的寿命显著降低，对比450 ℃下无腐蚀寿命，腐蚀疲劳寿命下降了2个数量级，应力腐蚀寿命下降到不足1%，且分散性较大。观察腐蚀疲劳和应力腐蚀的试样可以发现，表面有明显的腐蚀坑，腐蚀坑底发现裂纹。结论 热盐环境下，TC11腐蚀疲劳寿命和应力腐蚀寿命都会明显下降。由于腐蚀导致钛合金试样表面产生许多腐蚀坑，在腐蚀坑局部形成近似缺口，缺口部位的应力集中是导致腐蚀疲劳寿命衰减的重要因素。腐蚀疲劳的寿命低于Kt=1的无腐蚀疲劳寿命，但是要大于Kt=3的无腐蚀疲劳寿命。