紫外线消毒后微生物的光复活特性及其评价方法

随着紫外线消毒技术应用的日益广泛,污水紫外线消毒后微生物的光复活特性值得关注。文章综述了光复活的机理、具有光复活能力的微生物种类、影响光复活的因素以及光复活的评价方式等,以期为系统研究光复活提供参考。具有复活能力的微生物种类较多,主要和体内所含光复活酶相关。影响光复活的因素涉及微生物、污水特性、紫外线系统及光复活条件四方面。评价光复活的方式至今没有统一标准。光复活及其对污水消毒的影响有待进一步深入研究。     

UV/H2O2法处理焦化废水的试验研究

焦化废水是一种典型的成分复杂的难降解有机废水。实验利用UV／H2O2法对焦化废水的处理进行研究,探讨了不同反应时间、H2O2投加量、pH值等因素对COD去除率及色度降解效果的影响。结果表明．废水起始COD质量浓度为1334mg几时,H2O2投加浓度为45mmol/L,pH值=11,紫外灯照射60min,COD去除率可达70％以上;随着H2O2投加量的增加以及pH值的升高,污水的色度明显降低。     

污水处理中紫外消毒效果的研究

紫外消毒技术相对于氯化法消毒,能够快速、有效地去除污水中粪大肠杆菌,操作简单方面,无副产物生成,对周围环境和人员安全可靠,在中国许多污水处理厂都已取代氯化法消毒并广泛应用。阐述了紫外消毒和微生物光复活现象的原理,并通过大量试验来研究紫外消毒技术去除粪大肠杆菌的效果,及经紫外消毒后出水中粪大肠杆菌光复活现象对紫外消毒效果的影响,提出可采用出水避光排放、增加紫外照射剂量、延长照射时间等方法来控制微生物光复活现象。     

Degradation and detoxification of microcystin-LR in drinking water by sequential use of UV and ozone

Microcystins (MCs) produced by cyanobacteria are strong hepatotoxins and classified as possible carcinogens.MCs pose a considerable threat to human health through tainted drinking and surface waters.Herein filtrated water from a waterworks in Harbin,China,was spiked with microcystin-LR (MC-LR) extracted from a toxic scum of microcystis aeruginosa,and the spiked sample waters were treated using UV irradiation with consequent ozonation process (UV/O3),compared with ozonation at a dose range commonly applied in water treatment plants,UV irradiation at 254 nm and UV irradiation combined with ozonation (UV+O3),respectively.The remaining of toxins were analyzed using high-performance liquid chromatography and also determined using a protein phosphatase type 2A inhibition assay,which was utilized to evaluate the reduction in toxicity.Results indicated that in comparison to other three processes (O3,UV,and UV+O3),UV/O 3 process could effectively decrease both the concentration and toxicity of MC-LR at 100 μg/L level after 5 min UV irradiation with consequent 5 min ozonation at 0.2 mg/L (below 1 μg/L),while 0.5 mg/L ozone dose was required for the level below 0.1 μg/L.The addition of an UV treatment step to the existing treatment train may induce significant transformation of micropollutants and breaks down the natural organic matters into moieties unfavorable for ozone decomposition,stabilizing the ozone residual.These findings suggested that sequential use of UV and ozone may be a suitable method for the removal of these potentially hazardous microcystins from drinking water.     

紫外光降解反应器去除氯苯气体模型的建立与应用

从光化学反应过程出发,基于线性光源球面辐射能量分布（LSSE）,以反应器内部空间的辐射能吸收密度、空塔停留时间、进口浓度等为主要参数,建立了气相环境中紫外光化学反应器去除氯苯的数学模型.结果表明,建立的模型能很好地模拟和预测紫外光化学反应器对氯苯气体的去除性能.氯苯气体的紫外光化学反应表现出一级反应动力学的特征.该模型包含了紫外光降解反应器设计的主要参数,同时被用于预测了反应器在不同进口浓度和不同空塔停留时间条件下的出口氯苯浓度,进而获得不同进口浓度达标排放所需要的最小空塔停留时间,为气相污染物的紫外光降解反应器的设计与运行提供了重要的理论指导.     

颗粒物对紫外线灭活二级出水中粪大肠菌的影响

用低压紫外线照射具有相同颗粒物粒径分布的一系列水样,把实验结果带入二重动力学模型进行计算,评价自然状态下颗粒物对粪大肠菌的保护作用. 结果表明,二级出水中的大部分粪大肠菌都与颗粒物交连在一起;在颗粒物<10⁵ C·mL^-1时,颗粒物的增加会明显降低紫外线对二级出水中粪大肠菌的灭活率,但当颗粒物>10⁵ C·mL^-1时,这种影响不明显.从二重动力学模型的计算结果来看,对于不同颗粒物浓度的水样,难灭活的微生物所占的比重很小且比较稳定,大多数与颗粒物结合的粪大肠菌都较易被紫外线灭活.     

RGO/TiO2光催化降解2,4-二氯苯氧乙酸研究

通过Hummers法及紫外光/热还原工艺制得还原氧化石墨烯(RGO),采用溶胶-凝胶-煅烧法,以RGO和钛酸酊脂为前驱体制备出RGO/TiO2光催化复合材料,并利用XRD、FT-IR等对其进行了表征.对RGO/TiO2光催化降解性能的研究发现,复合光催化剂RGO/TiO2对2,4-二氯苯氧乙酸(2,4-D)的光催化降解活性显著优于纯TiO2,并且发现负载量和pH值对光催化降解性能有较大的影响:RGO/TiO2投加量为1.2g·L~(-1)、RGO负载量2%、pH为3、初始浓度为50 mg·L~(-1)反应12 h,2,4-D去除率达到98.75%;2,4-D降解率随着RGO/TiO2投加量的增大先增大后减小;RGO/TiO2对2,4-D的降解为脱氯还原和催化氧化过程,产生氯酚、苯酚等中间产物.     

还原铁粉/紫外光体系对活性艳红X-3B溶液的脱色

研究了在紫外杀菌灯（λmax=253．7nm,30W）照射下,添加还原铁粉的活性艳红X－3B水溶液的脱色作用。当pH=3．5,铁粉投加量为2．0g／L时,20mg／L活性艳红X－3B溶液在光照180min后的脱色率为79％。脱色为动力学零级反应。染料溶液的pH、铁粉投加量、活性艳红初始浓度对脱色有影响。初步探讨了脱色反应的机理。     

UV－H2O2法去除亚硝酸盐氮和氨氮的研究

用H₂O₂、紫外光(UV)辐射促进H₂O₂方法考察了水中NO-₂和NH+₄的氧化,结果表明,NO-O₂能被H₂O₂有效地氧化,而NH+₄不能被NO-₂和H₂O₂氧化,但UV辐射均有助于反应进行,使反应速率加快。      

UV-catalytic treatment of spent caustic from ethene plant with hydrogen peroxide and ozone oxidation

The performance of UV/H2O2, UV/O3 and UV/H2O2/O3 oxidation systems for treating spent caustic from an ethylene plant was investigated, in UV/H2O2 system, with the increase of H202 dosage, removal efficiencies of COD and the ratio of biochemical oxygen demand(BOD) to chemical oxygen demand(COD) of the effluent were increased and a better performance was obtained than the H2O2 system alone. In UV/H2O2 system, removal efficiency of COD reach 68% under the optimum condition, and BOD/COD ratio was significantly increased from 0.22 to 0.52. In UV/O3 system, with the increase of O3 dosage, removal efficiency of COD and BOD/COD ratio were increased, and a better performance was obtained than the O3 system alone. Under the optimum condition, removal efficiency of COD was 54%, and BOD/COD ratio was significantly increased from 0.22 to 0.48. In UV/H2O2/O3 system, COD removal efficiency was found to be 22.0% higher than UV/O3 system.