Respective contributions of point and non-point sources of E. coli and enterococci in a large urbanized watershed (the Seine river, France)

Because the large rivers of the Seine watershed have a low microbiological water quality, the main sources of fecal contamination were investigated in the present study. The inputs of the point (wastewater treatment plants (WWTPs) effluents) and non-point sources (surface runoff and soil leaching) of fecal bacteria were quantified for Escherichia coli and intestinal enteroccoci used as bacterial indicators. In order to assess the contamination through non-point sources, fecal indicators abundance was estimated in samples collected in small streams located in rural areas upstream from all point sources; these small rivers were characterized by the land use of their watershed. Bacterial indicator numbers were also measured in effluents of WWTPs, some using classical treatment (settling followed by activated sludge process) and some using an additional disinfection stage (UV irradiation). These data were used to estimate the respective importance of each type of source at the scale of the whole Seine river watershed taking into account the land use and the population density. It shows the predominant importance of the point sources of fecal indicator bacteria at the scale of the whole watershed. In a scenario in which activated sludge treatment would be complemented with UV in all WWTPs located in this watershed, the non-point sources of fecal indicator bacteria would be dominant.     

介质阻挡放电等离子体老化微塑料及对Zn (II)吸附的影响

为了在实验中缩短微塑料的老化时间,更真实地模拟自然老化条件,采用介质阻挡放电（DBD）等离子体老化聚乙烯微塑料（PE-MP）和聚丙烯微塑料（PP-MP）,同时研究了老化前后PE-MP和PP-MP对Zn （II）的吸附过程和机理.随着放电时间延长和输入电压升高,微塑料表面出现微小裂纹或孔洞,形成含氧官能团.老化后PE-MP和PP-MP对Zn （II）的吸附容量分别提高了22.7%和14.8%.老化前后微塑料对Zn （II）的吸附均符合准二级动力学模型.颗粒内扩散模型表明,Zn （II）在微塑料上的吸附过程可分为快速吸附,慢速吸附和吸附平衡3个阶段.同时,老化前后微塑料对Zn （II）的吸附均符合Langmuir吸附等温线模型.热力学结果表明,微塑料对Zn （II）的吸附是自发的吸热过程.Ca²⁺、腐殖酸和低pH值不利于微塑料对Zn （II）的吸附.     

民用煤排放PM2.5中碳组分与水溶性离子特征

研究4种典型民用煤燃烧排放PM_2.5中的碳组分以及水溶性离子含量特点,并通过PAM-OFR(潜在气溶胶质量-氧化流动反应器)模拟了大气老化过程(2d)对煤球与烟煤燃烧PM_2.5中碳组分与水溶性离子含量的变化影响。结果表明,烟煤燃放PM_2.5中碳组分含量最高,达到57.96%,其EC含量是其他煤种的4.3~9.6倍。民用煤燃烧产生PM_2.5中水溶性离子以Na⁺与SO₄^2-为主,其在总水溶性离子中占比合计约47%~76%。经历了大气老化试验后,煤球与烟煤燃烧排放PM_2.5中NH₄⁺和NO₃^-离子含量大幅增加,与之相比,TC占PM_2.5比例分别下降了12.03%与19.99%。     

车用高分子材料不同地区户外曝晒试验相关性研究

目的将3种高分子材料以及3种车用外饰材料分别投放在中国海南琼海和美国佛罗里达州2种典型湿热环境中进行户外曝晒试验,研究气候相似的2种地区的试验相关性。方法通过测试相同时间间隔下不同材料在2处试验场曝晒过程中的黄变程度,表征材料的老化现象。采用斯皮尔曼等级相关系数的统计方法,研究材料在2个地区相同时间节点的试验结果的相关性,并利用时间同轴的作图方法比较2个地区严酷度的差异。结果琼海与佛罗里达州2个地区在各个时间节点的相关系数接近于1,且在材料黄变方面呈现一定比例关系。结论琼海和佛罗里达州2个地区的试验结果呈现出较好的相关性,且严酷度比值约为琼海︰佛罗里达=1︰1.19。     

外绝缘用液体硅橡胶的自然老化因素研究

近年来,液体硅橡胶(Liquid Silicone Rubber,LSR)已经在外绝缘领域得到了较为广泛的应用,但是目前对其耐老化性能的研究还不够深入。尤其是在中国南方地区使用时,高温、高湿环境更容易导致液体硅橡胶的老化。在许多地区都观察到了电流、电压互感器的液体硅橡胶绝缘外套的龟裂、老化现象,对设备的安全运行产生了影响。本文设计并实施了在光照、高温、高湿、电晕等老化因素作用下的液体硅橡胶人工老化试验,并对老化试验后的样品进行了硬度、力学性能、憎水性、光泽度以及SEM、FTIR等微观性能试验和分析。认为在光照作用下,高温、高湿环境对液体硅橡胶具有加速老化作用,表现为硬度上升、憎水性下降、光泽度下降,并且在表面出现细微裂纹。     

对定标用标准紫外辐射光源性能指标的探讨

紫外辐射是模拟环境条件测试的重要组成部分,对紫外辐射强度、剂量等的定标对于老化耐久实验数据的准确性和可靠性具有重要意义。本文通过实验手段对目前常见的定标用紫外标准光源的技术指标进行分析,同时对该类光源的性能指标未来的改进方向进行探讨,并提出了改进设计方案。     

Effect of Tinospora cordifolia on the reduction of ultraviolet radiation‐induced cytotoxicity and DNA damage in PC12 cells

The safety of Tinospora cordifolia and its potential to protect against ultraviolet radiation‐induced cytotoxicity and DNA damage in PC12 cells were investigated. To evaluate the safety of T. cordifolia, cell viability and agarose gel electrophoresis were carried out using PC12 cells treated with 0 to 100 μg mL^?1 of methanol extract of T. cordifolia. T. cordifolia extracts did not show cytotoxicity ranging 0 to 100 μg mL^?1. In addition, T. cordifolia extracts significantly increased cell viability at 1 ng, 10 ng and 1 μg mL^?1 concentrations in serum‐deprived medium compared to control. To confirm the protective role against UV‐induced damage, PC12 cells alone or in the presence of 10 ng, 100 ng, or 1 μg mL^?1 of T. cordifolia extract were exposed to 250, 270 and 290 nm of UV radiation, which corresponded to doses of 120, 150 and 300 mJ cm^?2, respectively. Treatment with T. cordifolia extracts significantly increased the cell survival rate irradiated at 290 nm. In addition, T. cordifolia extracts significantly reduced cyclobutane pyrimidine dimer formation induced by UV irradiation at all wavelengths. In conclusion, T. cordifolia is not toxic and safe for cells. Our findings can support its application as phototherapy in the medical sector.     

Efficiency and degradation products elucidation of the photodegradation of mefenpyrdiethyl in water interface using TiO2 P-25 and Hombikat UV100

The photodegradation of mefenpyrdiethyl (MFD), an herbicide safener, was investigated in aqueous suspensions by using Degussa P-25 and Hombikat UV100 titanium oxide under simulated sunlight irradiation. The effects of initial concentration of the herbicide, pH, catalysts and hydrogen peroxide doses as well as their combinations were studied and optimized. Accordingly, the kinetic parameters were determined and the effectiveness of the processes was assessed by calculating the rate constants. A pseudo first-order kinetics was observed. Under experimental conditions, the degradation rate constants were strongly influenced using P-25 and no noticeable effect was observed for Hombikat UV100. DFT calculations with B3LYP/6-311+G(2d,p)//B3LYP/6-31+G(d,p) level of theory were performed to check whether significant conformational changes occur when the charge state of the MFD substrate changes and whether these changes could play a role in the dependency of photodegradation rate constant on the studied pH. High resolution mass spectrometry (FT-ICR/MS) was implemented to identify the main degradation products.     

紫外光降解对生物过滤塔去除氯苯性能的影响机制研究

紫外-生物过滤联合工艺中的紫外单元促进了后续生物过滤单元的氯苯去除性能.为了进一步揭示紫外光降解对生物过滤塔运行性能的影响机制,本研究系统分析了紫外光降解对生物过滤塔填料层pH、生物膜特性和填料层结构特性等方面的影响.结果表明,氯苯紫外光降解产物导致了生物过滤单元填料层pH的下降(从pH 6～8降至pH 4～7);另外,紫外单元产生的臭氧降低了生物过滤单元生物膜厚度和生物膜的EPS含量,改善了生物膜的特性,提高了氯苯和营养物质在生物膜内的传质效率.同时,臭氧可以有效控制生物量过量积累,增加了填料层的比表面积(从784 m2.m-3增加至880 m2.m-3),优化了填料层的结构特性,提高了污染物的反应速率.上述各方面的综合作用最终促进了生物过滤单元的氯苯去除性能.     

CF8611/AC531复合材料的实验室加速老化行为研究

目的获得CFRP的老化行为规律,研究紫外辐照、温度和湿度等环境因素的影响,方法以湿热效应和光氧老化的等量、等效损伤为原则,确定实验室加速老化环境谱编制方法。以CF8611/AC531复合材料为对象,依据确定的加速老化试验方案,开展加速老化试验,观察其微观形貌,并测量开路电位和动电位极化曲线。结果老化前,CFRP表面完整无裂纹,碳纤维/树脂界面结合良好;老化后,树脂基体出现裂纹和孔洞,同时界面遭到破坏。极化曲线随着老化时间的增长会向右下方移动,自腐蚀电位微降,幅度为0.0326 V,自腐蚀电流密度增长了近1621倍。结论加速老化导致表面碳纤维裸露面积不断增大,时间越长,破坏作用越明显,实际使用中应防止其与金属直接接触。