人为热对广州高温天气影响的数值模拟个例分析

基于广州市2009,2000和1990年工业、交通、生活能源统计数据,通过能源清单法估算出广州市对应年份的人为热排放量,再通过在WRF模式中引入2009,2000和1990年的下垫面数据和人为热排放方案,对2005,2012和2017年广州市的3次持续高温过程进行模拟,从而评估不同年代人为热排放水平对广州市极端高温天气的影响.结果表明,模拟的2m气温较为准确,能合理模拟出城市地区的热岛效应,但对极端高温的模拟略有偏低,而引入人为热有助于改善模拟结果.在case2012中,2009,2000和1990年3种人为热排放水平使广州城市下垫面的平均气温分别上升0.53,0.44和0.13℃,热岛强度增强0.43,0.38和0.13℃.3个模拟个例的结果均表明,日间的人为热排放比夜间大,但夜间气温及热岛强度的变化比日间要明显.     

2450MHz电磁波污泥脱水过程中的温度效应

采用2450MHz电磁波进行污泥脱水,研究电磁波加载过程中污泥温度变化对于剩余污泥性质和溶出效应的影响.研究发现,经电磁波加载后,污泥的容积指数（SVI）随着温度的升高而降低,在温度为80℃时由原泥的130.73mL/g降至最低值95.25mL/g,污泥沉降性能得到改善;经电磁波加载后,污泥离心含水率也随着温度的升高持续降低,最低降到80℃时的93.52%;污泥的毛细吸水时间（CST）在60℃时由原泥的29.4s降至最低值23.2s,污泥比阻（SRF）始终高于初始值,说明电磁波的加载一定程度上可以改善剩余污泥的离心脱水和板框压滤脱水效果,但不利于剩余污泥的真空抽滤.在电磁波加载过程中,检测污泥胞外聚合物（EPS）及上清液中可溶性化学需氧量（SCOD）的含量,发现污泥温度升高有利于污泥胞内物质的溶出.在80℃时,污泥上清液中SCOD含量由初始的124.1mg/L增大到883.4mg/L;同时也发现,温度高于60℃后,污泥中微生物细胞破壁更明显,污泥EPS含量随之发生变化,对污泥脱水性能的影响更加显著.     

大尺寸通风管网中障碍物对瓦斯爆炸冲击波传播特性影响的数值模拟

为了研究大尺寸通风管网中的瓦斯爆炸传播规律,采用数值模拟方法,针对具有不同障碍物数量的大尺寸通风管网模型,利用Fluent分析管网中各个监测点的超压变化曲线以及障碍物附近的速度矢量图,分析爆炸冲击波传播规律。研究结果表明:初期瓦斯爆炸后,障碍物的存在改变了通风管网内未燃瓦斯的积聚区域;高温和高压发生耦合作用,在氧气相对充足的进气管道中形成二次爆炸;障碍物与火焰波以及管网自身结构变化等多种因素形成复合作用,改变了通风管网内瓦斯爆炸冲击波的传播路径和叠加区域的位置;无障碍物时高压区域出现在进气管道中,有障碍物时高压区域出现在中部直管与斜管的交汇处附近,且数值相对较大。     

浅层小尺度隐伏断层地表勘探的正演模拟及应用

采用二维声波方程有限差分法对浅层小尺度隐伏断层地质模型的地震波场响应进行数值模拟,分别从震源位于断层下降盘顶、断层上升盘顶及断层顶三个不同位置进行正演模拟,对地震波场在断层模型中的传播规律及其地震记录变化特征进行了详细分析。结果表明多个单炮记录的变化对比不仅可以对断层进行快速有效的判断,而且为分析断层几何类型、估计断裂带范围与宽度等方面提供重要的依据。同时将模拟结果应用到实际生产中,取得了较好的应用效果。该方法能有效辅助实际野外工作中对断层的判断,为合理设计观测系统及采集参数设置提供指导,对提高浅层地震勘探现场工作效率和精度具有重要作用。     

Modelling of dust lifting process behind propagating shock wave

Dust dispersion from a layer is a complicated problem, which has not been completely solved yet, especially if an Eulerian–Eulerian approach has to be used to model the two-phase dusty flow. In previous investigation, a phenomenological model of the dust dispersion process from a layer was developed, but the evaluation of the model revealed some weaknesses. In the current paper, the model of the dust dispersion process was presented and three improvements of the model were studied: Saffman force, Magnus force and particles collisions. The implementation of Magnus and Saffman forces into the code did not improve the numerical results and it was shown that it had very little influence on the dust lifting process, in case the phenomenological model of the layer is used. Some explanations were proposed in the paper. Besides, an empirical model of particles collisions was also added to the code and its influence on the results was studied. It was shown that the particles collisions model improved the obtained results, but further modifications are to be studied in the future.     

与土体部分脱离的埋置半圆形基础与SH波的动力相互作用

利用波函数展开法结合奇异积分方程技术,研究了部分脱离的埋置半圆形基础与土体的出平面动力相互作用问题。把脱离区看做界面裂纹,将问题归结为一组奇异积分方程。通过数值计算获得了土体和基础中的位移场。利用动应力强度因子描述了粘接区的切应力强度,其结果显示:有缝隙界面基础与土体的动力相互作用呈现明显的低频共振特性。奇异积分方程技术的引入,使得笔者所用方法与已有方法相比更具一般性。研究结果对埋置结构的安全评估与寿命预测具有重要的理论与实际意义。     

厚壁管变形横波周向超声检测工艺及缺陷定位系统开发

在理论研究的基础上，利用试块对厚壁管变型横波与折射横波检测灵敏度进行了比较，证实了变型横波在厚壁管件中的检测灵敏度高于折射横波；设计开发计算软件，实现缺陷进行自动定位，大大提高现场检测效率和定位精度。     

石膏矿采空区顶板冒落冲击气浪传播规律及安全防范研究

为探索石膏矿采空区顶板冒落灾害形成及演化过程中的微观动力学行为,以某危害型石膏矿为研究背景,选择"打气筒"模型进行了空场法采空区顶板冒落相似物理模拟试验,并利用高速摄像及纹影技术,直观地记录分析冲击气浪产生时流场在直线型、转弯型、独头式模型巷道处的传播规律及变化特性.结果表明,在直线型巷道内传播时,冲击气浪并非按直线传递,而是气浪前端阵面会发生回转,与气浪尾部和后续的气浪叠加、交混,一起向前传递.在转弯型巷道中,冲击气浪传播至巷道转弯处时,气浪会马上在此改变传播方向,开始沿着转弯方向,向巷道出口传播.当气浪完全通过此处后,由于巷道围岩和空气的阻力,冲击气浪前端部分气流又会回流至此,进行二次破坏.在独头式巷道中传播时,由于巷道一端封合密闭,气体无法涌出,气浪无法在独头巷道中顺利向前传递,而是与巷道中的气浪相互叠加、碰撞,持续地、无规则地流动.     

An executive review of sludge pretreatment by sonication

Ultrasonication (US), which creates hydro-mechanical shear forces in cavitation, is an advanced technology in sludge pretreatment. However, there are many factors affecting the efficacy of cavitation and ultrasonication disintegration of sludge as a consequence. The objective of this work is to present an extensive review of evaluation approaches of sludge US pretreatment efficiency. Besides, optimization methodologies of related parameters, the differences of optimum values and the similarities of affecting trends on cavitation and sludge pretreatment efficiency were specifically pointed out, including ambient conditions, ultrasonic properties, and sludge characteristics. The research is a prerequisite for optimization of sludge US pretreatment efficiency in lab-scale and practical application. There is not-yet a comprehensive method to evaluate the efficiency of sludge US pretreatment, but some main parameters commonly used for this purpose are degree of sludge disintegration, proteins, particle size reduction, etc. Regarding US parameters, power input P_US, intensity I_US, and frequency F_S seem to have significant effects. However, the magnitude of the effect of P_US and probe size in terms of I_US has not been clearly detailed. Investigating very low F_S seems interesting but has not yet been taken into consideration. In addition, static pressure effect has been marginally studied only and investigation on the effect of pH prior to US process has been restricted. Their effects therefore should be varied separately and simultaneously with other related parameters, i.e. process conditions, ultrasonic properties, and sludge characteristics, to optimize sludge US pretreatment process.     

Ultrasound-assistant preparation of Cu-SAPO-34 nanocatalyst for selective catalytic reduction of NO by NH3

The influence of the various preparation methods of Cu-SAPO-34 nanocatalysts on the selective catalytic reduction of NO with NH₃ under excess oxygen was studied. Cu-SAPO-34 nanocatalysts were prepared by using four techniques: conventional impregnation (IM), ultrasound-enhanced impregnation (UIM), conventional deposition precipitation (DP) using NaOH and homogeneous deposition precipitation (HDP) using urea. These catalysts were characterized in detail by various techniques such as N₂-sorption, XRD, TEM, H₂-TPR, NH₃-TPD and XPS to understand the catalyst structure, the nature and the dispersed state of the copper species, and the acid sites for NH₃ adsorption. All of the nanocatalysts showed high activities for NO removal. However, the activities were different and followed the sequence of Cu-SAPO-34 (UIM) > Cu-SAPO-34 (HDP) > Cu-SAPO-34 (IM) > Cu-SAPO-34 (DP). Based on the obtained results, it was concluded that the NO conversion on Cu-SAPO-34 nanocatalysts was mainly related to the high reducibility of the isolated Cu^2 + ions and CuO species, the number of the acid sites and the dispersion of CuO species on SAPO-34.