近10年四川省碳排放特征分析

本文基于一次能源消费的统计数据,计算了四川省2000～2009年的碳排放总量、人均碳排放量和碳排放强度。结果表明:2000～2009年四川省能源消费总量、碳排放总量和人均碳排放量均呈显著上升趋势;第二产业碳排放量的比重最大,并且增大趋势明显;2000～2009年四川省碳排放强度年平均下降率小于国内生产总值的年平均增长率,未能实现二氧化碳的绝对减排。     

Options for Change in the Australian Energy Profile

Climate change is occurring largely as a result of increasing CO₂ emissions whose reduction requires greater efficiency in energy production and use and diversification of energy sources away from fossil fuels. These issues were central to the United Nation climate change discussions in Durban in December 2011 where it was agreed that a legally binding agreement to decrease greenhouse gas emissions should be reached by 2015. In the interim, nations were left with the agreement reached at the analogous 2009 Copenhagen and 2010 Cancun meetings that atmospheric CO₂ levels should be constrained to limit the global temperature rise to 2 °C. However, the route to this objective was largely left to individual nations to decide. It is within this context that options for reduction in the 95 % fossil fuel dependency and high CO₂ emissivity of the Australian energy profile using current technologies are considered. It is shown that electricity generation in particular presents significant options for changing to a less fossil fuel dependent and CO₂ emissive energy profile.     

Preparation of glass-ceramics from molten steel slag using liquid-liquid mixing method

A novel approach to prepare glass-ceramics from molten steel slag (MSS) was proposed. In laboratory, the water-quenched steel slag was melted at 1350 °C to simulate the MSS. A mixture of additive powders in wt.% (55 quartz powder, 5 Na₂O, 16 emery powder, 15 CaO, 8 MgO, 1 TiO₂) were melted into liquid at 1350 °C separately. Then the MSS and the molten additives were mixed homogeneously in order to obtain parent glass melt. The proportion of MSS in the melt was 50 wt.%. The melt was subsequently cast, annealed, heat-treated and transformed into glass-ceramics. Their microstructure and crystallization behavior were analyzed. The samples exhibited excellent properties and displayed bulk crystallization. The major crystallized phase was diopside ((Fe_0.35Al_0.20Mg_0.44)Ca_0.96(Fe_0.08Si_0.70Al_0.20)₂O_6.12), which was uniformly distributed in the microstructure. The novel approach may help iron and steel industry achieve zero disposal of steel slag with utilization of the heat energy of the MSS.     

Multiple system modelling of waste management

Due to increased environmental awareness, planning and performance of waste management has become more and more complex. Therefore waste management has early been subject to different types of modelling. Another field with long experience of modelling and systems perspective is energy systems. The two modelling traditions have developed side by side, but so far there are very few attempts to combine them. Waste management systems can be linked together with energy systems through incineration plants. The models for waste management can be modelled on a quite detailed level whereas surrounding systems are modelled in a more simplistic way. This is a problem, as previous studies have shown that assumptions on the surrounding system often tend to be important for the conclusions. In this paper it is shown how two models, one for the district heating system (MARTES) and another one for the waste management system (ORWARE), can be linked together. The strengths and weaknesses with model linking are discussed when compared to simplistic assumptions on effects in the energy and waste management systems. It is concluded that the linking of models will provide a more complete, correct and credible picture of the consequences of different simultaneous changes in the systems. The linking procedure is easy to perform and also leads to activation of project partners. However, the simulation procedure is a bit more complicated and calls for the ability to run both models.     

The oxidation mechanism of polychlorinated dibenzo-p-dioxins under the atmospheric conditions - A theoretical study

The atmospheric polychlorinated dibenzo-p-dioxins (PCDDs) partition appreciably in the gas phase, where they undergo rapid oxidation. The atmospheric oxidation mechanisms of a few PCDDs, initiated by OH radical, are studied using density functional theory calculations. The oxidations start with OH-addition to the aromatic rings, dominantly at γ-sites, followed by the non-chlorinated β-sites; while additions to the α-sites or chlorinated sites are negligible. For PCDDs with all β-sites being chlorinated, formation of PCDD-γ-OH adducts become virtually the only reaction path. Under the atmospheric conditions, the PCDD-β/γ-OH adducts combine with O₂ slowly at rates <1 s⁻¹. Instead, the PCDD-β-OH adducts will react with O₂ through hydrogen abstraction at rates <50 s⁻¹, forming PCDD-β-ol, and the PCDD-γ-OH adducts will decompose to the substituted phenoxy radicals by fused-ring C-O bond cleavage at rates of 10³ ∼ 10⁵ s⁻¹. The reaction mechanisms of PCDDs are drastically different from the peroxy mechanism for the atmospheric oxidations of benzene and dibenzofuran.     

State of the Art Report on Mathematical Methods for Groundwater Pollution Source Identification

The reliable assessment of hazards or risks arising from groundwater contamination problems and the design of efficient and effective techniques to mitigate these problems require the capability to predict the behavior of chemical contaminants in flowing water. Most attempts at quantifying contaminant transport have relied on a solution of some form of a well-known governing equation referred to as advection-dispersion-reaction equation. To choose an appropriate remediation strategy, knowledge of the contaminant release source and time release history becomes pertinent. As additional contaminated sites are being detected, it is almost impossible to perform exhaustive drilling, testing, and chemical fingerprint analysis every time. Moreover, chemical fingerprinting and site records are not sufficient to allow a unique solution for the timing of source releases. The purpose of this paper is to present and review mathematical methods that have been developed during the past 15 years to identify the contaminant source location and recover the time release history.     

Edible Protein Energy Return on Investment Ratio (ep-EROI) for Spanish Seafood Products

Life cycle assessment (LCA) has developed into a useful methodology to assess energy consumption of fishing fleets and their derived seafood products, as well as the associated environmental burdens. In this study, however, the life cycle inventory data is used to provide a dimensionless ratio between energy inputs and the energy provided by the fish: the edible protein energy return on investment (ep-EROI). The main objective was to perform a critical comparison of seafood products landed in Galicia (NW Spain) in terms of ep-EROI. The combination of energy return on investment (EROI) with LCA, the latter having standardized mechanisms regarding data acquisition and system boundary delimitation, allowed a reduction of uncertainties in EROI estimations. Results allow a deeper understanding of the energy efficiency in the Galician fishing sector, showing that small pelagic species present the highest ep-EROI values if captured using specific fishing techniques. Finally, results are expected to provide useful guidelines for policy support in the EU’s Common Fisheries Policy.

Electronic supplementary material

The online version of this article (doi:10.1007/s13280-013-0426-2) contains supplementary material, which is available to authorized users.     

中国农村能源正义的法律实现

为了厘清中国能源正义的现况,为《能源法》的制定提供直接参考,本文选择中国农村能源正义作为具体的研究对象,主要采用规范分析的研究方法,从能源正义和农村能源正义的概念界定入手,描述了中国农村能源不正义的事实现况和法律现况,指出了中国农村环境正义法律实现的路径,并阐释了法律实现的关键。本文认为,农村能源正义是指,能源的所有方、供给服务方、消费方等主体不因其农民的身份性质、农村的地域分布和农业的禀赋强弱等因素,而应在能源的勘探开发、加工转换、仓储运输、供给服务等领域享有平等的对待和实质的参与;农村能源不正义的事实现况主要表现为农村能源并未全面体现能源的自然、经济、安全和生态等多维价值,而其法律现况则主要表现为现有的能源立法并未对农村能源在分配、程序、矫正和社会正义上做系统的表达。本文指出,中国农村能源正义法律实现的路径,其逻辑起点在于保障农民的能源权,应首先从法律上正面规定公民的能源权,进而采用《能源法》的集中表达与相关法律部门的分散表达相结合的具体方式和步骤。本文建议,中国农村能源正义法律实现的关键是科学制定《能源法》,首先要明确其核心地位,处理好与《农业法》等法律部门之间的关系;其次要在总则中,重述立法目的、规定公民能源权、完善能源普遍服务;最后在《能源法》的分则中专设"农村能源"的章节,整合现有的《能源法(征求意见稿)》的内容,并从原则、规划、保障、生态化、公众参与、授权、救济、法律责任等方面进行优化。     

苏州市不同土地利用方式对碳排放影响的初步分析

利用苏州市2005—2010年土地利用以及能源消耗数据,对苏州市碳排放进行了估算,结果表明,2005—2010年苏州市碳排放呈逐年增加趋势,建设用地是主要的碳源,林地是主要的碳汇。并根据结果提出了关于减少碳排放的几点建议。     

基于Landsat-8数据和劈窗算法的地表温度反演及城市热岛效应研究

陆地表面温度(Land Surface Temperature,LST)是地表能量平衡组分中的一个重要参数。随着卫星遥感技术的快速发展,遥感反演成为获取区域LST的一个重要手段。目前已有学者提出多种基于遥感数据反演LST的算法,其中劈窗算法被证明是一种精度较高的算法。基于Landsat-8卫星30 m空间分辨率的陆地成像仪(OLI)数据和100 m分辨率的热红外传感器(TIRS)数据,采用劈窗算法计算了无锡地区的LST,并采用地面实测水温数据和同步的MODIS温度产品对Landsat-8的计算结果进行了验证和对比分析。结果表明:基于Landsat-8数据和劈窗算法获取的LST精度较高,误差1K。在计算的LST结果基础上,进一步提取了热场变异指数来分析城市热岛空间分布特征,给出了城市热岛效应的定量化描述,并就不同地表覆盖类型对热岛效应的影响进行了分析。