Urban expansion and its contribution to the regional carbon emissions: Using the model based on the population density distribution

The method is used for calculating regional urban area dynamics and the resulting carbon emissions (from the land-conversion) for the period of 1980 till 2050 for the eight world regions. This approach is based on the fact that the spatial distribution of population density is close to the two-parametric Γ-distribution [Kendall, M.G., Stuart, A., 1958. The Advanced Theory of Statistics, vol. 1.2. Academic Press, New York; Vaughn, R., 1987. Urban Spatial Traffic Patterns, Pion, London]. The developed model provides us with the scenario of urbanisation, based on which the regional and world dynamics of carbon emissions and export from cities, and the annual total urban carbon balance are estimated. According to our estimations, world annual emissions of carbon as a result of urbanisation increase up to 1.25 GtC in 2005 and begin to decrease afterwards. If we compare the emission maximum with the annual emission caused by deforestation, 1.36 GtC per year, then we can say that the role of urbanised territories (UT) in the global carbon balance is of a comparable magnitude. Regarding the world annual export of carbon from UT, we observe its monotonous growth by three times, reaching 505 MtC. The latter, is comparable to the amount of carbon transported by rivers into the ocean (196–537 MtC). The current model shows that urbanisation is inhibited in the interval 2020–2030, and by 2050 the growth of urbanised areas would almost stop. Hence, the total balance, being almost constant until 2000, then starts to decrease at an almost constant rate. By the end of the XXI century, the total carbon balance will be equal to zero, with the exchange flows fully balanced, and may even be negative, with the system beginning to take up carbon from the atmosphere, i.e., becomes a “sink”. The regional dynamics is somewhat more complex, i.e., some regions, like China, Asia and Pacific are being active sources of Carbon through the studied period, while others are changing from source to sink or continue to be neutral in respect the GCC.     

Modeling the carbon cycle of urban systems

Although more than 80% of carbon dioxide emissions originate in urban areas, the role of human settlements in the biosphere evolution and in global carbon cycling remains largely neglected. Understanding the relationships between the form and pattern of urban development and the carbon cycle is however crucial for estimating future trajectories of greenhouse gas concentrations in the atmosphere and can facilitate mitigation of climate change. In this paper I review state-of-the-art in modeling of urban carbon cycle. I start with the properties of urban ecosystems from the ecosystem theory point of view. Then I discuss key elements of an urban system and to which degree they are represented in the existing models. In conclusions I highlight necessity of including biophysical as well as human related carbon fluxes in an urban carbon cycle model and necessity of collecting relevant data.     

Analyzing the cost effectiveness of Santiago, Chile's policy of using urban forests to improve air quality

Santiago, Chile has the distinction of having among the worst urban air pollution problems in Latin America. As part of an atmospheric pollution reduction plan, the Santiago Regional Metropolitan government defined an environmental policy goal of using urban forests to remove particulate matter less than 10 microm (PM(10)) in the Gran Santiago area. We used cost effectiveness, or the process of establishing costs and selecting least cost alternatives for obtaining a defined policy goal of PM(10) removal, to analyze this policy goal. For this study, we quantified PM(10) removal by Santiago's urban forests based on socioeconomic strata and using field and real-time pollution and climate data via a dry deposition urban forest effects model. Municipal urban forest management costs were estimated using management cost surveys and Chilean Ministry of Planning and Cooperation documents. Results indicate that managing municipal urban forests (trees, shrubs, and grass whose management is under the jurisdiction of Santiago's 36 municipalities) to remove PM(10) was a cost-effective policy for abating PM(10) based on criteria set by the World Bank. In addition, we compared the cost effectiveness of managing municipal urban forests and street trees to other control policies (e.g. alternative fuels) to abate PM(10) in Santiago and determined that municipal urban forest management efficiency was similar to these other air quality improvement measures.     

Suspended Particulate Matter Distribution in Rural-Industrial Satna and in Urban-Industrial South Delhi

An air quality sampling program was designed and implemented to collect the baseline concentrations of respirable suspended particulates (RSP = PM₁₀), non-respirable suspended particulates (NRSP) and fine suspended particulates (FSP = PM_2.5). Over a three-week period, a 24-h average concentrations were calculated from the samples collected at an industrial site in Southern Delhi and compared to datasets collected in Satna by Envirotech Limited, Okhla, Delhi in order to establish the characteristic difference in emission patterns. PM_2.5, PM₁₀, and total suspended particulates (TSP) concentrations at Satna were 20.5 ± 6.0, 102.1 ± 41.1, and 387.6 ± 222.4 μg m⁻³ and at Delhi were 126.7 ± 28.6, 268.6 ± 39.1, and 687.7 ± 117.4 μg m⁻³. Values at Delhi were well above the standard limit for 24-h PM_2.5 United States National Ambient Air Quality Standards (USNAAQS; 65 μg m⁻³), while values at Satna were under the standard limit. Results were compared with various worldwide studies. These comparisons suggest an immediate need for the promulgation of new PM_2.5 standards. The position of PM₁₀ in Delhi is drastic and needs an immediate attention. PM₁₀ levels at Delhi were also well above the standard limit for 24-h PM₁₀ National Ambient Air Quality Standards (NAAQS; 150 μg m⁻³), while levels at Satna remained under the standard limit. PM_2.5/PM₁₀ values were also calculated to determine PM_2.5 contribution. At Satna, PM_2.5 contribution to PM₁₀ was only 20% compared to 47% in Delhi. TSP values at Delhi were well above, while TSP values at Satna were under, the standard limit for 24-h TSP NAAQS (500 μg m⁻³). At Satna, the PM₁₀ contribution to TSP was only 26% compared to 39% in Delhi. The correlation between PM₁₀, PM_2.5, and TSP were also calculated in order to gain an insight to their sources. Both in Satna and in Delhi, none of the sources was dominant a varied pattern of emissions was obtained, showing the presence of heterogeneous emission density and that nonrespirable suspended particulate (NRSP) formed the greatest part of the particulate load.     

Comparison of two metal surveys by moss Tortula ruralis in Budapest, Hungary

Moss transplants of Tortula ruralis were used as active biomonitoring organisms as part of a monitoring study to assess the metals (Al, Cd, Cu, Cr, Fe, Ni, Pb, V and Zn) associated with ambient particles on mosses in Budapest, the capital town of Hungary. The moss samples were collected in a nature conservation area from a semi-arid sand grassland (Festucetum vaginatae danubiale), less than 1 month before transplantation. Moss cushions were exposed to pollution in Budapest during October–November 1993 and February–March 1994. In the study area, 16 sites were marked out as measuring sites, in accordance with the structure of the city. A similar stand was established in the Botanical Gardens of the Szent István University in Gödöll? as a control site. ICP-AES analysis of moss for metals showed the ability of Tortula ruralis to accumulate the metals under study. Control site showed lower impact in comparison to the other sites.     

Spatial & temporal variations of PM10 and particle number concentrations in urban air

The size of particles in urban air varies over four orders of magnitude (from 0.001 μm to 10 μm in diameter). In many cities only particle mass concentrations (PM10, i.e. particles <10 μm diameter) is measured. In this paper we analyze how differences in emissions, background concentrations and meteorology affect the temporal and spatial distribution of PM10 and total particle number concentrations (PNC) based on measurements and dispersion modeling in Stockholm, Sweden. PNC at densely trafficked kerbside locations are dominated by ultrafine particles (<0.1 μm diameter) due to vehicle exhaust emissions as verified by high correlation with NOx. But PNC contribute only marginally to PM10, due to the small size of exhaust particles. Instead wear of the road surface is an important factor for the highest PM10 concentrations observed. In Stockholm, road wear increases drastically due to the use of studded tires and traction sand on streets during winter; up to 90% of the locally emitted PM10 may be due to road abrasion. PM10 emissions and concentrations, but not PNC, at kerbside are controlled by road moisture. Annual mean urban background PM10 levels are relatively uniformly distributed over the city, due to the importance of long range transport. For PNC local sources often dominate the concentrations resulting in large temporal and spatial gradients in the concentrations. Despite these differences in the origin of PM10 and PNC, the spatial gradients of annual mean concentrations due to local sources are of equal magnitude due to the common source, namely traffic. Thus, people in different areas experiencing a factor of 2 different annual PM10 exposure due to local sources will also experience a factor of 2 different exposure in terms of PNC. This implies that health impact studies based solely on spatial differences in annual exposure to PM10 may not separate differences in health effects due to ultrafine and coarse particles. On the other hand, health effect assessments based on time series exposure analysis of PM10 and PNC, should be able to observe differences in health effects of ultrafine particles versus coarse particles.     

城市生活垃圾生命周期管理

生命周期评价是一种全面的环境管理工具,具有潜在的发展前景。０它通过对产品,产品系统,工艺活动整个生命周期的环境影响环境改善的机会进行评价。根据国际环境毒理与化学学会１９９３年和ＩＳＯ１４０００环境管理体系中关于生命周期评价的技术框架,本文应生命周期评价在城市生产垃圾管理系统中的作用及管理系统的清单分析,影响评价和改善评价进行研究。     

我区城市污水处理程度探讨

建立城市污水处理厂处理污水,是城市发展的必然趋势,而处理级别及处理后水的去向及用途是关系到环境保护和资源得到充分利用的关键,针对我区干旱缺水,灌溉农业特征及天然水域的特点,就污水处理级别排水的用途提出一些看法。     

城市湿地公园建设中的若干问题探讨

本文主要围绕城市湿地公园建设中的定位、自然化、生态修复、危害物种防治四方面进行探讨,以期对城市湿地公园的建设和管理起到一定的指导作用。     

兰州城区大气粒子态汞的污染状况

通过调查发现在市工业区，粒子态汞浓度高，冬，夏平均值为０．９１和１．００ｎｇ／ｍ＾３，最高达１．９２ｎｇ／ｍ＾３，冬夏季无显著性差异，秋季浓度低，交通频繁区和交通商业混合区冬季平均值０．４５ｎｇ／ｍ＾３，夏季０．４９ｎｇ／ｍ＾３在清洁区大部分在０．１０ｎｇ／ｍ＾３左右，最低０．０７０ｎｇ／ｍ＾３，显示夏季和城区粒子态汞浓度偏高的特征。工业区粒子态汞主要是由人为污染产生的气态汞吸附在同一污染源的粒尘