Detection of Escherichia coli in wastewater based on enzyme immunoassay

This research describes a fast detection method on the basis of enzyme-linked immunosorbent assay (ELISA) for Escherichia coli in drainage of wastewater treatment plants. Optimized conditions such as the reaction format (sandwich or direct), the concentrations of diluted horseradish peroxidase (HRP)-E. coli conjugate, and anti-HPR antibody and pretreatment of E. coli were studied. Those results showed that the linear range of detection for E. coli was 10 cfu/mL-6 × 10⁴ cfu/mL. Compared with conventional methods, it is a convenient and sensitive detection method with low cost. Translated from Environmental Science, 2005, 26(5): 128–131 [译自: 环境科学]     

高效菌活性污泥法处理分散染料废水实验研究

针对复合微生物的筛选和分离进行了研究 ,分离出处理分散染料废水起高效降解作用的 2株菌种。结果表明 ,2株高效菌对分散染料废水降解能力很强 ,与普通菌结果对比CODCr去除率提高 17% ,并且高效菌对废水浓度的耐受性也明显提高     

Determination and discussion hydraulic retention time in membrane bioreactor system

Based on the microorganism kinetic model, the formula for computing hydraulic retention time in a membrane bioreactor system (MBR) is derived. With considering HRT as an evaluation index a combinational approach was used to discuss factors which have an effect on MBR. As a result, the influencing factors were listed in order from strength to weakness as: maximum specific removal rate K, saturation constant Ks, maintenance coefficient m, maximum specific growth rate ,ua and observed yield coefficient Yobs. Moreover, the formula was simplified, whose parameters were experimentally determined in petrochemical wastewater treatment. The simplified formula is θ= 1.1( 1/β -1)(Kｓ S)/KXo , for oetroehemical wastewater treatment K and Ko eaualed 0.185 and 154.2, resoectively.     

The 1934 floods in Tabriz, N. W. Iran

The disastrous floods of July 1934 in Tabriz are examined in the context of the history of floodinginthe city, which is crossed by a dry stream bed liable to sudden Inundation by mountain torrents from the southeast. Few details of past events have survived, suggesting that relatively little significance has been attached to them. Typically, flood dykes were inadequately maintained. This neglect, combined with a radical alteration in urban topography after 1925, when broad straight avenues were constructed through the old heart of the city, led to serious losses from flooding twice in 1929 and again in 1934. Enhanced perception of the flood risk finally found expression in the adoption of large scale engineering measures to mitigate future events, including strengthening protective dykes and widening the river channel through the city. These works have reduced vulnerability to flooding from river overflow. No long-term detrimental Impact of the 1934 flood has been observed. Some of the physical and social parameters that have influenced the vulnerability of Tabrizinthe past continue to be present both there and elsewhere in Iran, and they may be characteristic also of other regions with comparable natural environments or in a similar stage of socio-economic development.     

无机高分子絮凝剂聚硅铝铁硼的制备及其絮凝性能研究

以工业水玻璃、氯化铝、氯化铁、硼酸为原料，制备了一种性能优良的无机高分子絮凝剂聚硅铝铁硼(PSBFA)。通过考察不同pH值条件下水玻璃的胶凝时间、Si／Al物质的量比、硼的浓度、熟化时间等因素对聚硅铝铁硼产品应用性能的影响，确定了聚硅铝铁硼的最佳制备条件为pH值为2～4，Si／Al物质的量比在1．0左右，硼的浓度为0．02mol／L，熟化时间为5d左右。絮凝应用实验表明，聚硅铝铁硼对于印染废水脱色效果、生活污水的COD去除率具有优异的絮凝性能；与传统混凝剂硫酸铝和市售混凝剂聚合氯化铝(PAC)相比，PSBFA的具有投加量少、沉降速度快、絮体体积小等优点。     

膜生物反应器在污水处理中的应用前景

介绍了膜及膜分离技术。膜生物反应器（MBR）的原理。综述了膜生物反应器在污染处理领域应用开发情况；指出了膜生物反应器在发展中存在的主要问题；展望了膜生物反应器技术的发展前景。     

溶济萃取法处理含硫酸及硫酸盐的废水

采用溶剂萃取法处理含硫酸及硫酸盐的工业废水，主产优质农用硫酸钾，副产氯化铵和氮钾复合肥，整个工艺过程基本无三废排放，实现了对该废水的综合有效治理。     

酸性高浓度含氟废水处理技术

介绍了对某化工厂排放的酸性高浓度含氟废水进行处理的试验，采用石灰中和沉淀，氯化钙（或聚丙烯酰胺）二级絮凝沉淀，砂滤工艺进行处理，操作控制条件如下：pH为8－9，Ca^2 与F^-的摩尔比为3．0，聚丙烯酰胺投加量为2mg/L，沉淀时间为1h，处理工程运行后的验收监测结果表明，出水中的残氟浓度可以达到国家规定的一级排放标准，且系统运行稳定，工艺简便。     

一个研究街道峡谷流场及浓度场特征的三维数值模式

目前，研究街道峡谷内流场及机动车排放污染物的扩散行为特征所采用的主要方法为：采用野外测试法和物理模拟法，而采用三维数值模拟方法研究此问题的工作很少。本文创建了一个研究微尺度街道峡谷内流场及机动车排放污染物扩散特征的三维数值模式，即首次采用伪不定常方法，利用K——E闭合方案，建立了一个模拟城市街道峡谷内流场及污染物扩散特征与街道峡谷风场、街道几何结构及两侧建筑物高度对称性之间的复杂关系的三维数值模式。经过与实际监测资料及风洞实验对比，结果表明此三维模式具有较好的模拟精度，能够很好模拟峡谷内的风场及街谷几何结构对街道峡谷内流场及浓度场特征的影响，有很强的实用性。     

气浮--厌氧--生物接触氧化工艺处理屠宰废水

介绍了采用气浮-厌氧-生物接触氧化工艺处理屠宰废水的工程实例。当进水CODcr≤4500mg／L时，出水可达到国家《肉类加工工业污染物排放标准》(GB13457—1992)一级标准。