Preparation and coagulation efficiency of polyaluminium ferric silicate chloride composite coagulant from wastewater of high-purity graphite production

The aim of the present work was to produce a polyaluminium ferric silicate chloride (PAFSiC) coagulant from acidic and alkaline wastewater of purifying graphite by roasting, and subsequently to evaluate coagulation efficiency of the reagent by treating surface water from the Yellow River as well as municipal wastewater in comparison with the conventional coagulant polyaluminium chloride (PAC). The PAFSiC coagulant was prepared by co-polymerization. The effects of (Al+Fe)/Si molar ratio, OH/(Al+Fe) molar ratio (i.e., value), coagulant dosage and pH value of test suspension on the coagulation behavior of FAFSiC and the stability of the PAFSiC were also examined. Results showed that PAFSiC performed more efficiently than PAC in removing turbidity, chemical oxygen demand (COD), and total phosphate (TP). The PAFSiC with a value of 2.0 and (Al+Fe)/Si ratio of 5 (PAFSiC 2.0/5) showed excellent coagulation effect for both turbidity and COD, while PAFSiC 1.0/5 was the best for TP. The optimum coagulation pH range of PAFSiC 2.0/5 was 5.0–9.0, slightly wider than that of PAC (6.0–8.0). The process can be easily incorporated into high-purity graphite production plants, thereby reducing wastewater pollution and producing a valuable coagulant.     

Effect of anaerobic digestion on the high rate of nitritation, treating piggery wastewater

Laboratory reactors were operated by using piggery wastewater and the effluent of anaerobic digester from piggery wastewater plants to study the effect of anaerobic digestion on nitritation rate.     

改性膨润土处理污水处理厂二级出水的实验研究

研究基于再生水回灌地下、补充地下水水源的目的,使用河南信阳某膨润土厂生产的钠基膨润土,通过酸改性、铝柱撑改性和微波-硫酸亚铁改性制得三种改性膨润土,用于处理城市污水处理厂的二级出水.实验结果显示,经XRD衍射分析可知,三种方法制备的改性膨润土,其矿物结构都有不同程度上的变化,膨润土层间距都较膨润土原矿有所增大,可见其改...     

免烧粉煤灰陶粒作为BAF填料处理城市污水

以电厂粉煤灰为主要试验原料,辅以外加药剂(水泥、石灰、石膏、水玻璃),经混合、成球、陈化和养护等工序,制得免烧粉煤灰陶粒,并将其作为曝气生物滤池(BAF)工艺的载体填料处理城市污水.待挂膜启动成功后,考察了水力停留时间( HRT)、COD负荷、氨氮负荷对COD和氨氮去除效果的影响.实验结果表明:在温度为18～21℃、气...     

Fenton氧化在废水处理中的应用

综述了近年来Fenton氧化在废水处理领域的应用状况,对Fenton试剂氧化的机理和主要影响因素:温度、pH、反应时间、H2O2和Fe2+的投加量、H2O2/Fe2+量比以及反应动力学模型进行了简要介绍.最后探讨了Fenton氧化技术在废水处理领域现存不足之处及今后的发展趋势.     

磁性膨润土材料吸附处理印染废水研究

针对目前膨润土在应用中的一些问题,对膨润土进行磁性能改性,通过共沉淀法制备磁性膨润土颗粒,并对其进行了X射线衍射和磁性能表征分析.以阴离子染料OrangeⅡ为目标化合物,研究了磁性膨润土材料对OrangeⅡ废水的吸附效果,并探讨了主要工艺参数如阳离子表面活性剂的质量浓度、pH、温度等对染料去除率的影响.结果表明:阳离子...     

典型气浮净水设备评述

文章主要从气浮设备的原理与结构、优缺点、应用情况等方面评述了加压溶气气浮设备、涡凹气浮设备、浅层气浮设备、电气浮设备、充气水力旋流器、多段环流气浮塔和旋流-充气气浮系统等气浮设备,并讨论了气浮设备的研究和应用发展趋势。     

活性污泥吸附絮凝中纤板废水的研究

利用实验室培养的活性污泥吸附絮凝预处理中纤板废水中的悬浮物和有机物。研究结果表明,当污泥投加量为6~9 g/L,废水pH值为6,吸附絮凝时间为30 min,沉淀时间为30 min时,处理效果最好,对废水中SS,COD和SCOD的去除率分别为29%,24%和17%左右。该方法为含高悬浮物、高有机物工业废水的预处理开辟了新途径。     

制革废水深度处理回用ABFT工艺中试研究

研究了针对物化混凝＋SBR二级处理后的制革废水,采用ABFT＋吸附混凝沉淀工艺进行深度处理,其中出水主要污染物平均NH3-N 0.9mg/L,CODcr 133.8mg/L,平均去除率分别为99.0%和71.7%。通过脱色方案比较,活性炭吸附混凝沉淀法去除色度效果显著,出水色度低于5倍,另外出水回用于制革企业的生产性实验取得了成功,标志着制革废水深度处理与中水回用技术的一次重要突破,对制革废水处理提标减排和中水回用的开展具有良好的推动作用。     

氟硅酸钠废水处理与循环利用探讨

从芒硝法（Na2SO4）氟硅酸钠生产工艺过程分析了氟硅酸钠母液废水的来源和主要成分,剖析了现有污水处理工艺过程存在的三个方面缺陷,并从实施清洁生产、节能减排和完善治理设施两方面提出了改进对策,全面实现了废水的循环利用。