Thermal radiation from vapour cloud explosions

The current study estimates the radiation flux emitted from hot extended gas clouds characteristic of vapour cloud explosions along with the corresponding level of irradiance posed on particles suspended in the unburnt part of the cloud ahead of an advancing flame front. The data presented permits an assessment of the plausibility of combustion initiation by such particles due to forward thermal radiation. The thermal radiation will depend on the emissivity of the burned volume, which relates to the concentration of gaseous and particulate combustion products. A sensitivity analysis has been carried out to account for variations in the equivalence ratio, mixture pressure and radiative heat losses. The spatial distribution of irradiance ahead of the flame front has been computed by introducing appropriate geometrical factors to explore the impact of cloud size. Using fuel rich ethylene-air mixtures it has been shown that high flame emissivities can be achieved at path lengths of order 1 m even in the presence of very low soot volume fractions. The emissivity of gas-soot mixtures will hence be mainly determined by the soot concentration and to a lesser extent by the mixture temperature. Our analysis suggests that the role of forward thermal radiation as a contributing factor to flame propagation in large scale vapour cloud explosions can not currently be ruled out.     

Blast damage to storage tanks and steel clad buildings

The 2005 Buncefield vapour cloud explosion showed the huge cost associated with blast damage to commercial property surrounding a major explosion incident. In most cases there was serious disruption to business activity; in many cases the buildings had to be demolished or abandoned for long periods until extensive repairs were carried out.Another key feature of this and other recent vapour cloud explosions has been the damage done to storage tanks. The blasts almost invariably cause immediate top and bund fires in any tanks surrounded by the vapour – even if they contain relatively high flashpoint materials such as diesel.The first part of this paper describes the patterns of damage observed in buildings in the industrial estates around Buncefield. Methods for assessing the degree of external and internal damage are presented.The second part of the paper deals with failure modes and ignition of various types of liquid storage tank during vapour cloud explosions. Again, the Buncefield data provides excellent examples that illustrate the importance of tank design, fill level, location relative to the cloud, etc.     

火源房间出口面积与远离火源位置烟气浓度关系的实验研究

通过实验较系统地研究了火源房间烟气出口面积与远离火源位置烟气浓度的关系,主要探讨了一氧化碳浓度峰值的大小和到达峰值的时间与烟气出口流通面积和燃料质量的关系,并给出了初步的分析解释。     

Unified correlations for vent sizing of enclosures at atmospheric and elevated pressures

Innovative vent sizing technology is presented for explosion safety design of equipment at atmospheric and elevated initial pressures. Unified correlations for vent sizing are suggested. They are modifications of previously reported correlations verified thoroughly for experimental data on vented gaseous deflagrations under different conditions but only at initial atmospheric pressure. Suggested correlations are based on experimental data on vented deflagrations of quiescent and turbulent propane–air mixtures at initial pressures up to 0.7 MPa. Typical values of turbulence factor and deflagration–outflow interaction number are obtained for experimental vented deflagrations at initial pressures higher than atmospheric.

“Blind” examination of new vent sizing technology on another set of experiments with methane–air and propane–air mixtures has shown that predictions by suggested vent sizing technology are better than by the NFPA 68 guide for “Venting of Deflagrations”.

In the development of recently reported results for initial atmospheric pressure it has been concluded that the innovative vent sizing technology is more reliable compared to the NFPA 68 guide at elevated initial pressures as well. Moreover it is crucial that the calculation procedure remains the same for arbitrary deflagration conditions.     

Pressure relief sizing of reactive system using DIERS simplified methods and dynamic simulation method

Incidents involving uncontrolled chemical reactions continue to result in fatality, injury and economic loss. These incidents are often the result of inadequate pressure relief system designs due to a limited knowledge of the chemical reactivity hazard. A safe process design requires knowledge of the chemical reactivity of desired as well as undesired chemical reactions due to upset conditions. Simplified, cost effective methods to relief system sizing are presented by The Design Institute of Emergency Relief Systems (DIERS). They require multiple experiments, and sizing is only valid for the system composition and thermal inertia represented by the small scale experiments. Results are often conservative, especially for gassy systems. Detailed, dynamic computer simulation is highly accurate and can be used for iterative design and multiple scenario evaluation.In this study, an accelerating rate calorimeter (ARC^®) and a low thermal inertia calorimeter (automatic pressure tracking adiabatic calorimeter – APTAC™) were used to collect chemical reactivity data for the dicumyl peroxide and toluene system. Results of the pressure relief system sizing using the dynamic simulation method are presented and compared with DIERS simplified methods.     

High levels of natural radioactivity in biota from deep-sea hydrothermal vents: a preliminary communication

Hydrothermal deep-sea vent fauna is naturally exposed to a peculiar environment enriched in potentially toxic species such as sulphides, heavy metals and natural radionuclides. It is now well established that some of the organisms present in such an environment accumulate metals during their lifespan. Though only few radionuclide measurements are available, it seems likely that hydrothermal vent communities are exposed to high natural radiation doses. Various archived biological samples collected on the East Pacific Rise and the Mid-Atlantic Ridge in 1996, 2001 and 2002 were analysed by ICP-MS in order to determine their uranium contents (²³⁸U, ²³⁵U and ²³⁴U). In addition ²¹⁰Po–Pb were determined in 2 samples collected in 2002. Vent organisms are characterized by high U, and Po–Pb levels compared to what is generally encountered in organisms from outside hydrothermal vent ecosystems. Though the number of data is low, the results reveal various trends in relation to the site, the location within the mixing zone and/or the organisms' trophic regime.     

泄爆面特征参数对天然气爆炸超压峰值的影响规律

为揭示泄爆面特征参数对大尺度受限空间内天然气爆炸超压峰值结构的影响机制,基于典型房间特征,借助计算流体动力学技术研究不同泄爆面开启压力、开启时间以及泄压比等参数条件下室内天然气泄爆超压峰值结构的分布规律。研究结果表明:峰值Pb随开启压力和开启时间增加均呈线性增长趋势,而泄压比对Pb影响较小;峰值Pmfa与室内最大火焰面积有关,随开启压力、开启时间的增加和泄压比的减小,气体出流速度增大,进而产生更强的湍流,导致室内火焰面积和气体燃烧率增加,最终Pmfa增大;峰值Pext随泄压比增加呈快速降低趋势,同时开启压力和开启时间对Pext影响具有协同效应,共同促进Pext快速增加。     

轨顶排烟口对地铁地下车站火灾排烟效果影响研究

为了研究取消轨顶风口对地铁地下车站火灾防排烟的影响，采用CFD方法，针对全封闭站台门系统和全高站台门系统2种典型地铁车站，模拟车站公共区火灾和车站列车火灾发生时，有无轨顶风口对车站内排烟效果的影响。研究结果表明:针对车站公共区火灾，无论是全封闭站台门还是全高站台门系统，取消轨顶排烟口对公共区烟气温度、可见度、CO浓度等影响较低；但针对车站列车火灾，取消轨顶排烟口对公共区烟气温度、可见度、CO浓度均具有较大影响，排烟效果下降较多。     

An experimental set up of a PAH vapour generator and its use to test an annular denuder

The aim of this work is to develop and test a dynamic gas generator for semi-volatile organic compounds (SVOC). A single compound, naphthalene, is used as a surrogate PAH to test the system. The dynamic generation of PAH is based on the permeation technique [Analyst 106 (1981) 817; Am. Ind. Hyg. Assoc. J. 38 (1977) 712]. Monitoring the temperature and measuring the mass of PAH present in the permeation chamber every 48 h gives a direct measurement of the sublimation rate of the PAH. Knowing the flow rate, gives an accurate value of the concentration of PAH from the generator. It was found stable over a period of time under constant operating conditions. This concentration is diluted down to between 0.3 and 30 ppbv by a controlled flow of pure air. The diluting airflow is a mixture of dry and wet air, making it possible to control the relative humidity of the flow from the generator as well as its concentration in PAH. We used this generator to calibrate an annular denuder tube, based on the study by Gundel et al. [Atmos. Environ. 29 (1995) 1719]. Although this technique has been shown to be artefact-free for sampling gaseous PAH [Polycyclic Aromatic Compounds 9 (1996) 67; Atmos. Environ. 28 (1994) 3083], its trapping efficiency still depends on environmental parameters (temperature, relative humidity and sampling duration). Accordingly, we used our generator to calibrate a single annular denuder under controlled conditions (T degrees C, HR%, CPAH, sampling duration). The trapping efficiency of the denuder was calculated by two independent methods. Firstly, by comparing the amount trapped on a denuder with the measured mass sublimated in the generator. Secondly, by putting two denuders in series and comparing the mass collected on the first and the second tube. These two methods gave similar results, within the 10% relative uncertainties of both methods. The first results obtained show that, in environmental conditions, the efficiency ranges between 90 and 100%.     

A violent,episodic vapour cloud explosion assessment: Deflagration-to-detonation transition

A large vapour cloud explosion (VCE) followed by a fire is one of the most dangerous and high consequence events that can occur in petrochemical facilities. The current process of safety practice in the industry in VCE assessment is to assume that all VCEs are deflagration. This assumption has been considered for nearly three decades. In recent years, major fire and VCE incidents in fuel storage depots gained considerable attention in extreme high explosion overpressure due to the transition from Deflagration to Detonation (DDT). Though the possibility of DDTs is lower than deflagrations, they have been identified in some of the most recent large-scale VCE incidents, including Buncefield (UK), 2005, San Juan explosion (US), 2009, and IOCL Jaipur (India), 2009 event. Such an incident established the need to understand not only VCE but also the importance of avoiding the escalation of minor incidents into much more devastating consequences.Despite decades of research, understanding of the fundamental physical mechanisms and governing factors of deflagration-to detonation transition (DDT) transition remains mostly elusive. An extreme multi-scale, multi-physics nature of this process uncertainly makes DDT one of the “Grand Challenge” problems of typical physics, and any significant developments toward its assured insistence would require revolutionary step forward in experiments, theory, and numerical modelling. Under certain circumstances, nevertheless, it is possible for DDT to occur, and this can be followed by a propagating detonation that quickly consumes the remaining detonable cloud. In a detonable cloud, a detonation creates the worst accident that can happen. Because detonation overpressures are much higher than those in a deflagration and continue through the entire detonable cloud, the damage from a DDT event is more severe. The consideration of detonation in hazard and risk assessment would identify new escalation potentials and recognize critical buildings impacted. This knowledge will allow more effective management of this hazard.The main conclusion from this paper is that detonations did occur in Jaipur accident at least part of the VCE accidents. The vapour cloud explosion could not have been caused by a deflagration alone, given the widespread occurrence of high overpressures and directional indicators in open uncongested areas containing the cloud. Additionally, the major incident has left many safety issues behind, which must be repeatedly addressed. It reveals that adequate safety measures were either underestimated or not accounted for seriously. This article highlights the aftermath of the IOCL Jaipur incident and addresses challenges put forward by it.